GT EFI Qaud Rotor Motor

[andy01]

2 Fresh 588 CID GT Performance Quad Rotor Motors. Gen 4 Bow Tie Block, Crower Crank, Crower Billet Rods, JE Pistons, Dart Big Chief Heads, Jessel Pro Series Rockers, Manton Tapered Push Rods, AVN External Oil Pump, Weldon Electric Fuel Pump, Quad Rotor 2.3 Whipples, Indy Intake, Headers and tailpipes included. These motors made 1,080 @ 8*. Turn up the boost and octane they will make 1,300. These are used motors that were just gone through from intake to pan. These motors are fresh and will be dynoed for buyer when sold. Buyer can also pick block color if they like.
$65,000 Pair
$33,000 Each
Trades considered as well.
Andy
310-480-4285

[TOBTEK]

http://www.***boat.com/image_center/data/500/the_Quad_001.jpg
Here are some pics.
http://www.***boat.com/image_center/data/500/the_Quad_0021.jpg
http://www.***boat.com/image_center/data/500/the_Quad_004.jpg
http://www.***boat.com/image_center/data/500/the_Quad_006.jpg
http://www.***boat.com/image_center/data/500/the_Quad_013.jpg
paging Mr Harley, time for a real motor;)

[Hustler]

Damn!!!! Wrong color:)

[INSman]

That's a whole lot of motor :eek: :D

[phebus]

That would be sweet in the toon.................:D

[jackpunx]

this is a good deal.. To build this motor would cost about 50k

[mbrown2]

Is JRocket ever going to get his boat out of Gary's shop....or is it just considered furniture now? :)
Goodluck on the sell...very nice package for a very good deal!:)

[andy01]

Is JRocket ever going to get his boat out of Gary's shop....or is it just considered furniture now? :)
Goodluck on the sell...very nice package for a very good deal!:)
Johns boat is gone now, I wanted to make a planter box out of it and put it by the gate..... :D

[TOBTEK]

will look at some trades as well, need an inexpensive truck.

[BadKachina]

New or Used? # of hours? Hp? Headers included? What does it need? Flexplate? Coupler? Set up for Bravo? Motor mounts? Flywheel housing? Computer? Ignition? Warranty?
What kind of internals, heads, solid or hydraulic roller? What size blower? Oil cooler included? Fuel pump and regulator?
I might have an interested customer, but I would need some details first.

[OutCole'd]

ttt

[TOBTEK]

New or Used? # of hours? Hp? Headers included? What does it need? Flexplate? Coupler? Set up for Bravo? Motor mounts? Flywheel housing? Computer? Ignition? Warranty?
What kind of internals, heads, solid or hydraulic roller? What size blower? Oil cooler included? Fuel pump and regulator?
I might have an interested customer, but I would need some details first.
Give andy a call on his # listed, he has the skinny from Gary at GT on this.

[TOBTEK]

Monday bump...

[TOBTEK]

friday Bump...

[OutCole'd]

Will this thing fit in my Rhino bump......

[TOBTEK]

Still trying to get the parts list.
Anyluck with the parts list?

[phebus]

Anyluck with the parts list?
Now you're kicking your own tires.......classic. :D

[TOBTEK]

Now you're kicking your own tires.......classic. :D
watch it Mr. I'll come out there and kick you in the junk:D

[andy01]

Okay updated first post with parts list and pricing.
Andy

[BadKachina]

Okay updated first post with parts list and pricing.
Andy
So, does it need a computer or anything to run or is it included. Also does it include the accesories in the picture (sea pump, alt., powersteering pump, brackets and pulleys)?

[andy01]

So, does it need a computer or anything to run or is it included. Also does it include the accesories in the picture (sea pump, alt., powersteering pump, brackets and pulleys)?
My understanding is the cumputer and everything comes with them/it. And the accesoris in the picture are included. I just didn't have the headers out to get a picture of them . The motor/s come pretty much ready to run. I think you may need to buy a oil cooler and bell housing but I would have to double check on the small items.
Andy

[BadKachina]

My understanding is the cumputer and everything comes with them/it. And the accesoris in the picture are included. I just didn't have the headers out to get a picture of them . The motor/s come pretty much ready to run. I think you may need to buy a oil cooler and bell housing but I would have to double check on the small items.
Andy
Wow, headers too. This is a smokin deal. I may have a buyer.;)

[andy01]

Wow, headers too. This is a smokin deal. I may have a buyer.;)
I thought it was a great deal, that is why I jumped on it. One motor comes with headers, the other does not have them included. I can work out a deal if somebody does buy both motors. If you have a buyer let me know...... :)
Andy

[TOBTEK]

mid week bump....
Mr Harley should get rid of the little girl motor and R&R with this QUAD:idea: :D

[andy01]

Bump, I want to sell one or both of these motors.
Andy

[scarabrick2]

Who built the motor ??
GT performance in house ? or, was it out sourced ?
Do you have a DYNO sheet ???
My buddy with a 28 eliminator eagle may be looking?
Thanks

[TOBTEK]

Who built the motor ??
GT performance in house ? or, was it out sourced ?
Do you have a DYNO sheet ???
My buddy with a 28 eliminator eagle may be looking?
Thanks
give Andy a call, he can answer all your questions.... 310-480-4285

[TOBTEK]

bumpage

[scarabrick2]

Andy works for WHO?
Is he an engine guy?
Sales guy ?
Nice guy?

[andy01]

Andy works for WHO? Myself
Is he an engine guy? No
Sales guy ? Yes
Nice guy? Depends on who you ask.
:D
If you have questions about buying the motor and want to get into detail feel free to call me at my number or Gary @ GT Performance.
Andy

[andy01]

I could use a offroad truck or something for the winter, bring me some trades.

[Unitek]

are those standard Gen 5 blocks ? If so how come you didnt use a Dart or World ?

[andy01]

are those standard Gen 5 blocks ? If so how come you didnt use a Dart or World ?
Gen 4 Bow Tie Block
Andy

[TOBTEK]

BUMP.........for Craig;)

[TOBTEK]

tues bump

[andy01]

Remember trades considered, I could use something to run the desert this winter.
Andy

[TOBTEK]

I could use a new 800 SXR, besides the 05 Monster energy SXR in my garage;) we are riding Friday, get yours down here grumpy.

[andy01]

I could use a new 800 SXR, besides the 05 Monster energy SXR in my garage;) we are riding Friday, get yours down here grumpy.
No thanks, that interest me about as much as a trip to the dentist. I think I am going to Parker to ride mine.
Andy

[scarabrick2]

Maybe, 2frocefull is lookinjg for a new motor for his force. He has a few desert toys for sale. Maybe a trade ... Just a thought...... Helping you both out

[TOBTEK]

bump

[andy01]

A lot of interest in this motor, but no cash yet.
It is ready to go, it will be dynoed and painted your colors when you purchase it.
Andy

[TOBTEK]

Maybe, 2frocefull is lookinjg for a new motor for his force. He has a few desert toys for sale. Maybe a trade ... Just a thought...... Helping you both out
if he would have bought RHINO's maybe... :D

[TOBTEK]

Sunday bump..

[TOBTEK]

tis the season to RE-POWER....:D
TRADES ? 800 sxr jetski, yamaha waveblaster, Rhino, C6 Corvette?

[TOBTEK]

Bump:)

[andy01]

tis the season to RE-POWER....:D
Yes, this is the best time of year to be dialed in for next season running faster then you were last year.
Andy

[andy01]

This motor can be sold less headers if you already have a set. Or are looking to save a couple of bucks. A lot of e-mails and pm's on this motor but no strong offers or trades yet.
Andy

[al cole'holic]

..do you use that email address..?? :confused:

[andy01]

..do you use that email address..?? :confused:
Yes did you not get my reply? If not I can resend......... I have had problems with my new MSN.
Andy

[TOBTEK]

Monday night bump..... REPOWER time:)

[TOBTEK]

bump...
trades welcome. Rhino, Corvette, 800 SXR jetski, 96 seadoo Xp, 95/96 yamaha Waveblaster... or ??

[andy01]

To the top
Andy

[TOBTEK]

someone has to need some big power.