Panther Parts?

[sanger rat]

Anybody know where I can find some used Panther parts. Need a BBC bellhousing and driveshaft coupler. :)

[malcolm]

Don't the Panthers use a three point Berk bellhousing? The Panther setup my Dad has is for a Ford and the Bell says Berkeley on it. That won't help with the coupler though, those Panther splines are tiny!

[lilrick]

I have the coupler unit .........I ripped that panther outta there!!!!!(562)307-5578...lilrick

[sanger rat]

Thanks, Rick. Is the bellhousing the same as a Berkeley?

[lilrick]

Thanks, Rick. Is the bellhousing the same as a Berkeley?
well the bellhousing is the same, I'm not quite sure what you mean. the bellhousing will not change, just the splines did . the two pumps have a different spline on the shaft.

[sanger rat]

Trying to help out a local guy here. Boat had a BBF now switching to BBC. Going to keep the Panther in it for now. So a Berkeley BBC bellhousing will bolt up the the Panther pump. And with your coupler he should be go to go. Right?

[460 WJ]

You know there is nothing wrong with that ford!!!!

[AZKC]

The bell housing really clamps to the pump. There is a large rubber oring type deal that goes on the pump then the bell housing sits on top and and the clamping part goes on the bottom. 2 long bolts pinch it together. Not sure if a 3 point berkeley bellhousing will work but if it fits the pump I cant see why not. :idea:

[sanger rat]

You know there is nothing wrong with that ford!!!!
Yes there is. It went BOOM!

[460 WJ]

Well rebuild it then.. LOL

[sanger rat]

BOOM! As in pieces. Rod let go and took out the block. :)

[sleekcrafter]

BOOM! As in pieces. Rod let go and took out the block. :)
Yep, that will leave a mark!!
Sleek