1973 Ford Bronco $9500

[Caljamr]

FOR SALE - Located in Las Vegas.
1973 Ford Bronco
$9,500 or partial trade
1973 Ford Bronco 4x4
302cu, headers, flowmaster, edelbrock intake and carb, Mallory Dist, MSD coil and wires.
Ford 9” rearend with Detroit Locker and Dana 44 front end.
Carb just rebuilt, new plugs, oil tuneup 35 miles ago.
3" lift with new bushings and Rancho shocks. , 5-35" SSR's on steel wagon wheel rims (one rim and tire is brand new).
Hi-Lift jack, HD bumper and KC lights on front.
Wild Horses rear tire carrier and gas can holder bumper.
Black leather seats out of Saleen Mustang.
Good top. Roll bar. rear seat. Sony cd player with 4spkrs. Grant steering wheel. New rear tank.
http://www.***boat.com/image_center/data/500/Jacks_73_Bronco.JPG
http://www.***boat.com/image_center/data/500/BroncoMotor.JPG
http://www.***boat.com/image_center/data/500/BroncoMotor2.JPG
http://www.***boat.com/image_center/data/500/BroncoBackBumper.JPG
http://www.***boat.com/image_center/data/500/BroncoFront.JPG
http://www.***boat.com/image_center/data/500/BroncoInterior2.JPG
http://www.***boat.com/image_center/data/500/BroncoSaleenSeats.JPG
http://www.***boat.com/image_center/data/500/BroncoRimTire.JPG

[Baja Big Dog]

Great looking ride, the first of the SUV"s...and 73 puts is under the smog years, great California car....
Good luck:D

[pw_Tony]

Great looking ride, the first of the SUV"s...and 73 puts is under the smog years, great California car....
Good luck:D
Oh no no no....

[whiteworks]

73 was a great year for the bronco. I believe the first year of the dana 44.
do you have a hard top for it?

[Caljamr]

Oh no no no....
Thanks for thumbs up on the Bronco. My dad had a '62 Willy's (could be wrong on year and it rocked and that was an early SUV.
Everyone.....i'm willing to consider a trade. I'm trying for a Harley, but a Bombardier quad, dirtbike, jetski or something else. If your interested let me know.

[Caljamr]

73 was a great year for the bronco. I believe the first year of the dana 44.
do you have a hard top for it?
No hard top. I guess i should find a hardtop because that was the first question over on www.glamisdunes.com. :)

[Caljamr]

Great looking ride, the first of the SUV"s...and 73 puts is under the smog years, great California car....
Good luck:D
SMOG EXEMPT. That was a huge factor when i bought this bronco 9 years ago. :)
Thanks on the good luck.

[whiteworks]

they go for about a grand for a good one. you like old panheads?

[Caljamr]

they go for about a grand for a good one. you like old panheads?
I was looking for something newer but what do you have?
Just think i had two hardtops sitting in my backyard in California. I just never liked the hard top on because it was so loud with no liner and carpet.

[whiteworks]

I was looking for something newer but what do you have?
Just think i had two hardtops sitting in my backyard in California. I just never liked the hard top on because it was so loud with no liner and carpet.
The day I got my bronco the roof and doors were off.
48 panhead rigid frame 60's period chopper. needs someone who has passion for these old relics, quite a desireable motorcycle in some circles.

[HemiDude]

Might you be interested in a nice 1967 ElCamino?
Thanks for thumbs up on the Bronco. My dad had a '62 Willy's (could be wrong on year and it rocked and that was an early SUV.
Everyone.....i'm willing to consider a trade. I'm trying for a Harley, but a Bombardier quad, dirtbike, jetski or something else. If your interested let me know.

[Caljamr]

The day I got my bronco the roof and doors were off.
48 panhead rigid frame 60's period chopper. needs someone who has passion for these old relics, quite a desireable motorcycle in some circles.
I hate to say this....but as i'm getting older (40 yo) i'm getting tired of wrenching and want to enjoy my toys. Don't get me wrong. I've driven this Bronco to Sand Lake Oregon twice. 1,500 miles round trip with no problems. But you know how a 30+ year old vehicle needs attention.
I bet that chopper would be a nice bike to hit up some places on Las Vegas Blvd. :)

[whiteworks]

like I said passion is a must with a60 year old chopper pretty fockin old huh:D

[Caljamr]

like I said passion is a must with a60 year old chopper pretty fockin old huh:D
Ya but isn't it worth it when your cruisin' down the road and people give you the thumbs up. I know the minute the Bronco is gone i'll miss it.

[whiteworks]

yeah its worth it until you standing on the side of the road giving everyone driving by the thumbs up lookin for a ride cause your Antique took a shit on you:D

[Caljamr]

yeah its worth it until you standing on the side of the road giving everyone driving by the thumbs up lookin for a ride cause your Antique took a shit on you:D
That's funny ..... now. I had at 1987 Suzuki Quadzilla 500 2-stroke quad and i rebuilt it from the ground up and it was a looker. I was riding it and people were giving the thumbs up and stopping by our camp to see it. I tried to start it again and it wouldn't start. Spent the better half of a day in the sand kicking a bored out 500 2-stroke to finally find out a wire shorted out. SUCKED big time.

[victorfb]

standard or automatic trans?

[Caljamr]

standard or automatic trans?
Standard 3spd.

[FELTIT]

How Many Miles On Motor. i have a 2005 custom harley rigid . very nice bike. its listed in the spam .poss trade its listed for $14000.00

[Jyruiz]

Thats a nice Bronco, you should post more pics of it.

[CA Stu]

yeah its worth it until you standing on the side of the road giving everyone driving by the thumbs up lookin for a ride cause your Antique took a shit on you:D
There isn't anything on that rig that can't be fixed with a 1/2" drive socket set, a 9/16", 1/2", and 5/8" end wrench and some electric tape and a swiss army knife.
What a good looking rig!
Thanks
CA Stu
PS You don't have a straight driver's side fender and door do ya? I tipped my '67 on its side. :mad:

[Caljamr]

Thats a nice Bronco, you should post more pics of it.
More pics are coming tomorrow morning. Thanks for the compliment.

[Caljamr]

There isn't anything on that rig that can't be fixed with a 1/2" drive socket set, a 9/16", 1/2", and 5/8" end wrench and some electric tape and a swiss army knife.
What a good looking rig!
Thanks
CA Stu
PS You don't have a straight driver's side fender and door do ya? I tipped my '67 on its side. :mad:
When i lived back in Cali i had a whole backyard full of Bronco parts. Doors, tops and misc. When i moved to Vegas i liquidaty all my parts.
Thanks for the compliment.

[gome inc.]

i worked with a guy who had a bronco just like that. he is an electrcian. nice ride.

[Southocg]

Is the Bronco still for sale? Is there anyway I can get you to e-mail some more photos?

[Havasu Carrera]

73 was a great year for the bronco. I believe the first year of the dana 44.
do you have a hard top for it?
First year of Dana 44 was 71.5
First year with disc brakes as a OPTION was 73 though only a hand full got them.

[Caljamr]

I've got the pictures on a memory card just need to get them onto the hard drive. Will get them out today.

[TheCarDudes]

Sent you a PM last week on a possible trade.

[Southocg]

I aslo am interested in a trade... Mine involves cash.

[wright27]

sent you a P.M.

[Caljamr]

New Pics added

[Caljamr]

Ttt

[Caljamr]

Ttt

[Caljamr]

Good morning bump. If nobody is interested i'm going to have to keep it ..... oh darn. :D

[Caljamr]

Anyone ..... partial trade......quad, bike or ?

[RUSHIN ROULETTE]

Nice Bronco!!

[Caljamr]

Nice Bronco!!
Thank you.
It's still for sale. Just washed it for whoever wants a nice clean bronco.

[PaPaG]

Thank you.
It's still for sale. Just washed it for whoever wants a nice clean bronco.
Still for sale?

[LEADFOOTjosh]

and it begins.. lol
:eat: