PDA

View Full Version : Rhino Bling



hot_diggity_dog
02-28-2006, 08:39 AM
Anyone interested in some Rhino Bling. I have the inside line on some products :D
Billet Air filter adapter that completly seals from the carb to the air filter in the box. under $100.00 with K&N and about $10.00 less with a Uni filter :argue:
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN7455resize.jpg
How about replacing those cheap plastic seat latches before they break.
About $90.00 a set
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN7453resize.jpg
Also grab handle's for three sizes of roll cages and a few other items too!
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN7450resize.jpg
Just checking on the interest from my fellow Hot Boaters before I pull the trigger on a package deal! :)
Let me know!
HDD :cool:

casean
02-28-2006, 08:46 AM
Anyone interested in some Rhino Bling. I have the inside line on some products before they go out on the market. :D
Billet Air filter adapter that completly seals from the carb to the air filter in the box. under $100.00 with K&N and about $10.00 less with a Uni filter :argue:
I definitely might be interested in the billet air filter adapter and K&N. Do you know if you are able to retain the stock air box with this setup?
What other products do you have the inside track on?
Thanks.

Cole Trickle
02-28-2006, 09:13 AM
Do they make anything that will get a steering wheel closer to say a female driver? (The girlfriend is 5'5" and has to drive with her arms out)
Any performance advantage to the air filter adapter and K&N (Measured performance)

hot_diggity_dog
02-28-2006, 09:25 AM
Do they make anything that will get a steering wheel closer to say a female driver? (The girlfriend is 5'5" and has to drive with her arms out)
Any performance advantage to the air filter adapter and K&N (Measured performance)
Add a quick release hub and have it extended.
Small performance increase with K & N setup.
HDD

Cole Trickle
02-28-2006, 09:31 AM
Add a quick release hub and have it extended.
Small performance increase with K & N setup.
HDD
Do you make the QR hubs?

Evo22
02-28-2006, 09:41 AM
before they are out on the market??? I have all that in stock :cool: yes you can still run the stock air box and I have quick releases in stock too hey HDD I have got the hook up on 686 kits :rollside:

Cole Trickle
02-28-2006, 09:46 AM
before they are out on the market??? I have all that in stock :cool: yes you can still run the stock air box and I have quick releases in stock too hey HDD I have got the hook up on 686 kits :rollside:
How much closer to the QR move the wheel to the driver?
Price?

Mrs. casean
02-28-2006, 09:56 AM
Do they make anything that will get a steering wheel closer to say a female driver? (The girlfriend is 5'5" and has to drive with her arms out)
Any performance advantage to the air filter adapter and K&N (Measured performance)
Yes! We need steering wheels to help us girls drive! Let us know what you find Brandin! :D

Cole Trickle
02-28-2006, 10:01 AM
Yes! We need steering wheels to help us girls drive! Let us know what you find Brandin! :D
Might be cheaper if we just don't let you two crazzies drive!!!;) :crossx:

casean
02-28-2006, 10:05 AM
Might be cheaper if we just don't let you two crazzies drive!!!;) :crossx:
Don't you mean "drag race down the wash"? :crossx:
I'm also interested in a QR hub, if it move the steering wheel closer to the driver. I'd like to stay with the same size steering wheel though.

Cole Trickle
02-28-2006, 10:08 AM
Don't you mean "drag race down the wash"? :crossx:
I'm also interested in a QR hub, if it move the steering wheel closer to the driver. I'd like to stay with the same size steering wheel though.
I actually had fun when they were racing.... My kidneys still hurt from the whoops :220v:
http://www.***boat.com/image_center/data/520/2491lindsr.jpg
Jen wanted me to post this one for Linds :)

hot_diggity_dog
02-28-2006, 10:19 AM
Do you make the QR hubs?
Evo "Longtravelrhino" does them.
This is the one So Cal Fab did for me!
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN6985resize.jpg
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN6984resize.jpg
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN6981resize.jpg
HDD

Magic34
02-28-2006, 02:03 PM
This is the one So Cal Fab did for me!
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN6985resize.jpg
HDD
I'm surprised that it hasn't fallen off yet if they did it. Better check it good or throw some duct tape on it just in case.

ADDICTED
02-28-2006, 02:18 PM
Evo "Longtravelrhino" does them.
This is the one So Cal Fab did for me!
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN6985resize.jpg
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN6984resize.jpg
http://www.riverratlife.com/uploads/hdd/Rhino/DSCN6981resize.jpg
HDD
Glen I want the seat latches. Mine broke and are now screwed down. Need some asap.
Call me!

hot_diggity_dog
02-28-2006, 02:37 PM
I'm surprised that it hasn't fallen off yet if they did it. Better check it good or throw some duct tape on it just in case.
OUCH!!!!!
Let's just say so far it was WW's ride only that had some issues. :crossx: :argue: :cry: :cry:
No problems here! :cool: :boxed:
HDD

WetWillie
02-28-2006, 05:21 PM
Hey HDD,
Thank you for the support!!! :mad: I should have never pointed out that front axle that was poping out!! :) :).
Oh I forget yours is fine! :rolleyes:
OUCH!!!!!
Let's just say so far it was WW's ride only that had some issues. :crossx: :argue: :cry: :cry:
No problems here! :cool: :boxed:
HDD

hot_diggity_dog
02-28-2006, 05:26 PM
Hey HDD,
Thank you for the support!!! :mad: I should have never pointed out that front axle that was poping out!! :) :).
Oh I forget yours is fine! :rolleyes:
It still is LOL
HDD

WetWillie
02-28-2006, 07:45 PM
So is mine! I will add it to the list.... :mad: Fix that shit myself!! :crossx:
Call you tommorow imissed your call the other day.. :)

Magic34
02-28-2006, 07:53 PM
OUCH!!!!!
Let's just say so far it was WW's ride only that had some issues. :crossx: :argue: :cry: :cry:
No problems here! :cool: :boxed:
HDD
Bring the duct tape and bailing wire....
I wouldn't let that guy work on my kids wagon if it had a flat tire.