new turbo motor

[sofa king smooth]

Afew pics of the new motor for the 21 deck.:devil: :D
http://www.***boat.com/image_center/data/500/motor13.jpg
http://www.***boat.com/image_center/data/500/motor22.jpg
http://www.***boat.com/image_center/data/500/motor32.jpg

[CP Dad]

Looks wicked Joe!! What kind of numbers that thing puttin out? You know where we'll be at Phoenix, come by for a beer. Jason

[maxwedge]

Looks awesome, but that duct tape attaching the turbos to the plenum will never hold up under boost.:D

[sofa king smooth]

See you for sure at phoenix.
1502hp@6200
1440trq

[MKEELINE]

Very, very nice!

[GAWnCA]

That is one HELL-OF-A good looking motor!!

[FuelInMyVeins82]

Saw it Friday night the motors insane joe. You've got to be stoked.

[pattymelt18]

You always out do yourself joe looks stellar.

[Dogballs]

Joe,
Looks like the deck boat is gonna be the fastest party on the water. How far along is the hull? I can't wait to see it run. You should bring it to Ming for a goof.
Scott

[texas-19]

Lookin good.
Looks like a custom intake manifold or was it
cut down from maybe a sheetmetal intake?
What kind of intercooler,is it a race aero,i like the way it fits the intake.
Is it the tube type?
Just fyi,i was going to use the same aluminum tubing
to go from the fuel rails to the regulator but Jegs said
that aluminum tubing was only rated for 25#'s of pressure
not sure if he knew what he was talking about.
I know your way above that with those numbers.
I would think it should take alot more than than 25.
What's your take?

[socalmoney]

Thanks for posting this. Now I feel really great about my hum drum setup. haha
Something to aspire to. Looks great.

[1978 Rogers]

That looks awesome. I've never heard a set up like that run. Congrats.

[sofa king smooth]

Lookin good.
Looks like a custom intake manifold or was it
cut down from maybe a sheetmetal intake?
What kind of intercooler,is it a race aero,i like the way it fits the intake.
Is it the tube type?
Just fyi,i was going to use the same aluminum tubing
to go from the fuel rails to the regulator but Jegs said
that aluminum tubing was only rated for 25#'s of pressure
not sure if he knew what he was talking about.
I know your way above that with those numbers.
I would think it should take alot more than than 25.
What's your take?
Its a custom made manifold to keep the height down to fit under hatch.
Its a gentry plenum and garett intercooler.
Fuel pressure is somewhere around 76-78 under full boost,so I don't think he knew what he was talking about. I have the same hard line on another motor and never have had a problem.

[Unchained]

Looks impressive.
I see what looks like an electric fuel pump mounted on the front of the cyl head so what are all the other items bolted on the front of the cam drive ?
What ECU did they use ?

[sofa king smooth]

Fuel filter is mounted to the head. The electric primer pump is mounted down below the head on the block. There is a cam driven oil pump as well as cam driven fuel pump piggy backed to it.
The management system is autronics.

[Hass828]

That is one KILLER motor, where did you get the water cooled headers with waste gate provisions,Id love to have a set of those as Im eventually going to put together a motor with two huge turbos blowing into an enderly bird catcher, on alky. I know what everyone is going to say about the heat helping spin the turbos up but Im useing water cooled exhaust on my turbo motor right now with no ill effects and little or no lag.

[sofa king smooth]

Cmi makes the headers and garett makes the water cooled exhaust housings.

[Hass828]

Cmi makes the headers and garett makes the water cooled exhaust housings.
are they in there catalog or do you have to call them, If you dont mind how much $$ were they ?

[sofa king smooth]

Call them they make two different heights. They are pricey I think around 5-6k
I think you were talking about the headers right?

[Hass828]

Call them they make two different heights. They are pricey I think around 5-6k
I think you were talking about the headers right?
yes, just the headers.

[jetovatorjeff]

Nice Motor Joe. Always top of the line. Congrats and enjoy!

[MikeF]

I can only imagine what that engine is capable of pushing any hull to!:eek:
Damn!

[RCB19]

As usual it's insane Joe. Cant wait to see this one run.

[Cs19]

what a pile.
lets drop it in the 418 with the AAAA and run BGJ.

[Scarab Jet]

Simply Awesome...
Now, post some good shots of the boat itself...
And... when do U expect it to be all ready and delivered?

[JAY4SPEED]

http://www.***boat.com/image_center/data/500/motor13.jpg
:jawdrop: <~~~drool
I love the polish job on the heads! Cam driven fuel pump for EFI? Thats a new one on me. Wow!
Jay

[Unchained]

Fuel filter is mounted to the head. The electric primer pump is mounted down below the head on the block. There is a cam driven oil pump as well as cam driven fuel pump piggy backed to it.
The management system is autronics.
Awesome !!
I thought I was the only one that was running a cam drive EFI fuel pump and a primer pump. My setup has worked great. I also have a water pump in the cam driven stack.
I read up on the Autronics and it is top of the line.

[Sleeper CP]

what a pile.
lets drop it in the 418 with the AAAA and run BGJ.
;)
See you for sure at phoenix.
1502hp@6200
1440trq
That's stout.
You might be able to tow my CP faster than it can push itself;) :D
What type of deck boat and what drive system?
Sleeper CP
Big Inch Ford Lover

[sofa king smooth]

Carbon ultra 21 with a jet.AAAA impeller.

[Sleeper CP]

Carbon ultra 21 with a jet.AAAA impeller.
That's going to be bad ass and then some:devil:
I wonder if any one has ever put a Hamilton axial flow jet on/in a 21-24' deck boat?
Being here in the San Diego area I have seen a few of the Navy Seal small tactical boats and they run the Hamilton's. I just wonder how they would work on a 21-24' deck. I do know they are very $$$$ costly.
I know off topic for your boat, and they have their own limitations w/rpm etc.
Good luck with your project, I guess you'll get it finished this winter?
Sleeper CP
Big Inch Ford Lover

[mcderns]

Thats a sweet set up!! I like it a lot!

[HBjet]

That thing is insane. I see you are living the dream. Congrats.
It's going to suck for anyone who want's a piece of that deck boat. :D

[FuelInMyVeins82]

That thing is insane. I see you are living the dream. Congrats.
It's going to suck for anyone who want's a piece of that deck boat. :D
Oh they wont even see it coming. They'll just hear the scream of death as the turbos spool up. 1500 hp under the hatch is insane.

[Sleeper CP]

That thing is insane. I see you are living the dream. Congrats.
It's going to suck for anyone who want's a piece of that deck boat. :D
If that isn't the truth, I think I'll stay clear. I can only imagine the "boat" if the engine is like that. Bad to the bone & nothing spared when it comes to cost. Very, very nice.
Sleeper CP

[Havasu Hangin']

Very nice.
Is that one of Gary's creations?

[Cs19]

Jetovatorjeff is going to hand sofa his ass anyways. who cares...:sleeping: :sleeping: :p

[sofa king smooth]

Get your detail rag ready. 000 is going to break it off deep!:eek:

[steelcomp]

Nice motor Joe.
What's the static CR and what gas/boost did you dyno with?

[sofa king smooth]

Its 8 or 8.5 to 1 don't remember. 16.5lbs of boost is where we ended. 110 or better should be fine.

[Sleeper CP]

:jawdrop: 1,502 HP w/ 16.5 psi @ 6,200 :jawdrop: :jawdrop: How many inches is that monster:eek:
Sleeper CP
Big Inch Ford Lover

[Cs19]

Get your detail rag ready. 000 is going to break it off deep!:eek:
Ive got my hands full on that bet..Ill bring a rag

[sofa king smooth]

:jawdrop: 1,502 HP w/ 16.5 psi @ 6,200 :jawdrop: :jawdrop: How many inches is that monster:eek:
Sleeper CP
Big Inch Ford Lover
580

[Sleeper CP]

I hope to see it run some day. Is the hull ready for it?
Sleeper CP
Big Inch Ford Lover

[sofa king smooth]

The hull is at the riggers most of the hardware is done. Will be ready minus interior in December.
We stepped the bottom and had Bennet do a drop keel. The boat was very lite for a deck.should run good I hope. Boat will live in Needles but will go to Blythe from time to time.

[Scarab Jet]

The hull is at the riggers most of the hardware is done. Will be ready minus interior in December.
We stepped the bottom and had Bennet do a drop keel. The boat was very lite for a deck.should run good I hope. Boat will live in Needles but will go to Blythe from time to time.
Where abouts in Needles? I am right by Rainbow RV camp/beach about a mile or so up river from the Needles bridge... I'd appreciate it if you'd let me know when you get it on the water so that I can see that thing run...

[Sleeper CP]

SKS,
I was looking at this again:confused: How does the throttle body/bodies work on that set up:confused:
And at what rpm was that 1,440 lbs. ft.?
Sleeper CP

[jetovatorjeff]

Jetovatorjeff is going to hand sofa his ass anyways. who cares...:sleeping: :sleeping: :p
i ll bring something to make him sleepy. dont worry CS youll be at the finish line before he lets go of the rope :D Get ready to drink Sofa and CS because i am ready to go on a mission of liver destruction. :D Cant wait to help you guys out.

[Bense468]

They see me rollin...they hatin
nice setup, now ya need another one with an aluminum block to drop it in a sandcar.

[Boostedballs]

OOOOOHHH!
someone give me a napkin!

[SGV40oz]

They see me rollin...they hatin
nice setup, now ya need another one with an aluminum block to drop it in a sandcar.
dont listen to a word this guy says

[GAWnCA]

Bumped

[TRG]

Christ! Joe cant leave anything, well enough alone,...there he goes again raising the bar to the moon! lol
Good stuff bro!
P.S. got any new pics???
Todd

[78CoLe]

seen the boat a couple of weeks ago when i picked up my impeller gonna be a awsome set up way sweet but i still dig you v-drive