PDA

View Full Version : Spam 1977/02 CVX 20 (New $$)


superV
08-14-2003, 06:50 AM
Well im putting the Glastron up for sale minus motor. After my little mishap with the motor my insurance paid me out and I found a new boat so this one has to go. It was set up with a 460 and a Berkley JE pump boat is very nice with a killer system in it,New Autometer Silver face gauges, interior, carpet, floor, paint, wiring, plumbing, and Rino lined 100% of inside of boat.Im sure im leaving some stuff out but ill let the picture do the talking. The boat ran 58 mph on the gps @ 4400 rpm with a soso impeller.The boat sits on a tandum axel with new rims and tires. Asking $5500(lowered the price to $4500) minus motor every thing else stays with the boat and its all new the boat was completly restored in 2002. Boat is located in St.Louis Mo. 63367
http://ebay3.ipixmedia.com/abc/M28/_EBAY_d18d5163c86f559040f83265fea750b5/i-5_B.JPG
http://ebay3.ipixmedia.com/abc/M28/_EBAY_d18d5163c86f559040f83265fea750b5/i-6_B_L.JPG
[ August 15, 2003, 10:26 AM: Message edited by: superV ]
superV
08-14-2003, 06:57 AM
http://ebay3.ipixmedia.com/abc/M28/_EBAY_d18d5163c86f559040f83265fea750b5/i-9_B_L.JPG
http://ebay3.ipixmedia.com/abc/M28/_EBAY_d18d5163c86f559040f83265fea750b5/i-11_B_L.JPG
http://ebay3.ipixmedia.com/abc/M28/_EBAY_d18d5163c86f559040f83265fea750b5/i-1_B_L.JPG
http://ebay3.ipixmedia.com/abc/M28/_EBAY_d18d5163c86f559040f83265fea750b5/i-12_B_L.JPG
http://ebay3.ipixmedia.com/abc/M28/_EBAY_d18d5163c86f559040f83265fea750b5/i-4_B_L.JPG
superV
08-14-2003, 07:36 AM
Call me at 314-368-2808 for more info!
superV
08-14-2003, 09:23 AM
Bump!
superV
08-14-2003, 12:21 PM
No one looking for a great buy? This is a excellent boat with alot of style... :cool:
Hydro-Thunder
08-14-2003, 01:58 PM
Seems like a little too much without the engine. Up here in MN I can usually find a nice one for $4000 including engine. Granted yours looks REALLY nice.
superV
08-15-2003, 04:45 AM
Hydro-Thunder:
Seems like a little too much without the engine. Up here in MN I can usually find a nice one for $4000 including engine. Granted yours looks REALLY nice. A clean CVX 20 will bring about 7-10K in the kind of shape this one is in! I agree It does seem high but I just check on the glastron owners site. 4k is a very common price to find a fixer upper. If someone is serious im willing to hear what they have to say, $5,500 is a O.B.O price!
Thanks for looking... wink
superV
08-15-2003, 09:27 AM
New price due to some e-mails :( argue
superV
08-19-2003, 05:20 AM
No interest in this?
Jetmugg
08-19-2003, 10:37 AM
I like the boat, and I'm in the StLouis area. What model pump is in the boat? I currently have an Earl Smith Gullwing (project boat), but I'm always keeping my eyes open for a more family friendly jet.
SteveM.
superV
08-19-2003, 10:42 AM
Its a JE pump in good shape, shows a little wear on the leading edge of the impeller. With the motor on its way out it ran 58 on the gps. The motor just needs a wrist pin and rod..
Jetmugg
08-19-2003, 05:30 PM
It's a good looking boat for sure. I'm picturing myself as James Bond, running upriver fleeing from the bad guys. I'm not crazy about the E pumps, but for a family boat I'm sure it would work fine. Does the comment about the engine needing a wrist pin and rod mean that the engine comes with the boat?
Steve
superV
08-20-2003, 06:47 AM
Jetmugg:
It's a good looking boat for sure. I'm picturing myself as James Bond, running upriver fleeing from the bad guys. I'm not crazy about the E pumps, but for a family boat I'm sure it would work fine. Does the comment about the engine needing a wrist pin and rod mean that the engine comes with the boat?
Steve Its possible give me a call @ 636-625-1140.
superV
08-21-2003, 07:46 AM
Bump! :rolleyes:
superV
08-25-2003, 06:39 AM
(.)(.)
bigriverdog
08-26-2003, 09:36 PM
Dude, Want to trade for an Eliminator mini day with a turbo 400 and v-drive? Just messin with ya, Josh. You got my paper work yet? Bob
superV
08-27-2003, 06:12 AM
bigriverdog:
Dude, Want to trade for an Eliminator mini day with a turbo 400 and v-drive? Just messin with ya, Josh. You got my paper work yet? Bob Shit ya ill trade ya! wink What time should i be in Denver? As for the paper work i have been to the guys house 2 times with no luck his kids tell me he is in Arkansas and wont give up a phone # for him. However you should be able to tittle it with your bill of sale according to Ar. DMV. Give it a try! :( Sorry
BTW send me some pics of that bad boy...
bigriverdog
08-27-2003, 08:53 AM
It's looking pretty good. I'll get you some photos as soon as I get it back. The ding-dongs that repaired the v-drive didn't check out the prop shaft like I asked. The shaft looks bent and it spit out the whip strut bushing out after 10 minutes in the water. I'll give the dmv a shot, but the bill of sale is from you and the boat title is a different name. It was no prob on the boat because I had a signed off title. So don't give up, and I'll let you know. Bob
superV
08-27-2003, 12:12 PM
bigriverdog:
It's looking pretty good. I'll get you some photos as soon as I get it back. The ding-dongs that repaired the v-drive didn't check out the prop shaft like I asked. The shaft looks bent and it spit out the whip strut bushing out after 10 minutes in the water. I'll give the dmv a shot, but the bill of sale is from you and the boat title is a different name. It was no prob on the boat because I had a signed off title. So don't give up, and I'll let you know. Bob 10-4 Sorry to hear about all the little problems man i must have got lucky with all the time i put on the boat without any problems eek!
superV
08-29-2003, 09:42 AM
Just trying to stay on page 1.... :rolleyes: