PDA

View Full Version : Gelcoat


jetaddict
09-24-2002, 12:59 PM
Can someone give me a ballpark price on getting a single color gelcoat done. 19ft sleekcraft. Not including prep. Or approximately with prep.
Thanx
Hustler
09-24-2002, 01:06 PM
Go here and ask Barney www.havasubarney.com (http://www.havasubarney.com)
Johnwithjm
09-24-2002, 02:42 PM
Barney does nice work
hack job
09-24-2002, 03:19 PM
contact barney he is the man! he has done a couple of boats and he is doing mine! 928 505 8678
good luck! :D wink
396_WAYS_TO_SPIT
09-24-2002, 05:48 PM
I asked barney the same question and he said around $2000. Thats for 1 color!!!!!
396--
hack job
09-24-2002, 06:14 PM
i have seen many of his prices and that seems pretty hight that must have inculed body work! i know that he is good guy shoot him some pics of your boat and tell him what you wAnt and he will most likly surprise you!
www.havasubarney.com (http://www.havasubarney.com)
79Hawaiian
09-24-2002, 07:34 PM
Anyone know somebody local to Los Angeles? Also I have stress cracks. I assume these are the gelcoat and would be removed with a new gelcoat. Does "body work" mean sanding the old gelcoat off?
SPECTRABRENT
09-24-2002, 07:59 PM
JOe's Tooling - Sun Valley - 818-768-4636
Brent
396_WAYS_TO_SPIT
09-24-2002, 11:06 PM
Hack job I think you are right bro. I think he was refering to some hull work with that price.
396
Kwicherbichen
09-25-2002, 02:08 AM
Definately see what Havasu Barney can do for ya
[ September 25, 2002, 03:10 AM: Message edited by: Kwicherbichen ]
superdave013
09-25-2002, 03:54 AM
Here is a peek at Havasu Barney's gel coat work.
http://free.***boat.net/gallery/Gearhead_Garage/Other_Equipment/vent_and_gas_cap1.JPG
lakesmodified
09-25-2002, 07:02 AM
superdave013:
Here is a peek at Havasu Barney's gel coat work.
http://free.***boat.net/gallery/Gearhead_Garage/Other_Equipment/vent_and_gas_cap1.JPGSuperDave, can you give me an idea what that excellent job ran you? Thanks, Ivan
superdave013
09-25-2002, 07:36 AM
My boat had so much glass work done to it that the price was pretty high. I bet Barney ground out and filled over 40 holes, most were bolt holes but some were 4" round ones. Also he fixed a shit load of cracks, Most were stress cracks (through the gel into the glass) and others were where the bow of the boat was almost busted off! Last but not least he relpaced bulkheads and fixed a few stringers that were comming loose.
So if your boat is in as bad of shape as mine was then you better really like it. If not, you're better off sending him some pics and just getting a price. What I paid might scare ya off but for what a new schiada cost it was worth fixing.