anyone run a dial a jet on there fuel injection

[flattie]

Wondering if you can run a dial a jet on an enderle hat? I was thinking if you were crusing you could lean it out a bit. Any thoughts on this?

[McIntyrelocal]

yeah my buddy is building an all steel 40 willy's coupe with a blown injected 392 with an upright enderle and he is gonna run a dialajet bob brooks that used to own brooks rods and now owns aft clutches said it would work really well.hes been around injected blown motors sinse the 50's

[LandSpeedRacer]

I run one although I made my Fuel Injection out of a bunch of Hilborn and Enderle stuff being blown through by 4 turbos.
Real happy with the Dial-a-jet:)
LSR

[sgdiv7]

I run one on my boat and it works real well. Keep in mind you have to remember to turn it back to where you had befor you moved it, if you don't it will be lean and it will pop. If you have a blower this is a bad thing. BOOM!

[flattie]

cool thats the answers I was hoping to get. Where do you have yours installed? The return line going back to the tank??

[fc-pilot]

Yes, the return line goes back to the tank or where ever you were going to run your return to. If I remember correctly it takes the place of your main bypass, right?
Paul

[flattie]

I would think so

[sgdiv7]

If the main bypass is over .100 you have to run a range jet valve because it will unseat the jet in the jet selector valve. call Kinsler & they will explain it. (248) 362-1145