565 TPI Whipple305 efi 1100+HP

[TPI]

Turn key and ready to drop in on 91 octane. This motor has been completely gone through by TPI and has approx 10 hrs. Its an absolute pussycat at low speeds and around the docks with UNREAL power at WOT. Power is made effortlessly and with the progressive linkage on the throttlebody, it accellerates smoothly to be "nicer" on the drive. The motor is All American with the following components:
Dart tall deck with Billet main caps
Callies magnum crank 4.25(standard on rods/mains)
Manley pro I beam rods 6.535
J&E pistons
Dart CNC Pro 1 heads w/inconel valves
Crane hyd roller valve train
Whipple W305 SC w/MOAC Intercooler
Aeromotive Fuel system
Mefi 4 ecu with knock retard
cmi FULLY POLISHED e-tops
Merc Bellhousing/coupler
This is an absolutely PERFECT running engine. No dissappointments $55K
Thanks
Gary Taylor/TPI (805)480-2693
http://www.***boat.com/image_center/data/500/07w5l_011m.jpg

[INSman]

Hey Gary, why you knockin' retards ?!? :eek: :D

[DEMOMAN]

tis the season to repower

[TPI]

:D
http://www.***boat.com/image_center/data/500/07w5l_004m.jpg

[TPI]

If anyone is interested in this motor without headers, oil cooler, sea strainer, whatever,,,,,,,,,,,,,,,,,,,,,,,,,,,,,I will consider it. This motor does no one any good just sitting here(especially me). If its not sold by the end of December, it will probably go over to Absolute Speed and Marine in LHC to be on display. Feel free to PM me or call if you are interested. Seriously, this motor is a pussycat to drive around, and the throttle linkage is very user friendly, and when you are ready to drop the hammer,,,,,,,,,,,,IT DELIVERS!
Thanks
Gary (805)480-2693 or gary@tpboats.com

[TPI]

ttt
Motor is fresh and complete with all the up to date components for a 2008 boat. Will consider Mercury motor trade ins..................

[TPI]

Happy Holidays;;;;;;
Still for sale