Another high end 100MPH hot 'tin' boat

[Xerophobic]

Another high end tin boat on the market this week.
This just showed up on our forum so I figured I would post it up for Ryan over at Bohhica Racing
Please contact ryan@bohhicaracing.com for more information. More pictures will be posted at www.bohhicaracing.com in the "For Sale" section.
This Rob C's old boat. Rob started Eagle and is responsible for alot of the hull design and technology you see us continuing to develope today. This was his personal boat and was a real screamer from what I understand. Similar 572/720 treatment so the motor will make about 680 HP on pump gas. Boat has hit 100 and is a 20 degree Steptec boat, not a tunnel!
21' Eagle Sport For Sale $55,000.
21' Eagle Sport Step-Tech
*Rolled wind screen
*Custom Aluminum roll bar
*60gal Plastic belly tank
*Fully carpeted interior
*Auto-Meter Carbon guages
*Dual rack steering
*Eagle RaceTech seats w/ rear padded seat
American Turbine pump, SS impeller, Chrunyk race nozzle
572ci/720hp Chevrolet Crate Motor
*AMS detuned motor to 9.5 comp ratio and it still makes over 680hp
*Original 12.5 piston still in box
*Lightning headers
*MSD ignition
*LESS than 25 hours on entire package
*Lots of custom powder coating, paint, braided hose & aluminum fittings
http://www.outlaweagle.com/forum/files/rob2r_100.jpg
http://www.outlaweagle.com/forum/files/engine__2_165.jpg
http://www.outlaweagle.com/forum/files/rob5_175.jpg
Cheers

[deltarat]

I'm sorry but the more I look at these boat the more I like them. I am just wondering how the ride out of the river and on a lake. Are they a light boat with a lot of bounce or are they stable?

[Xerophobic]

Yes these boats are light as thats half the advantage to building with aluminum. The centerpod is extremely strong, like in a tunnel (1/2" thick aluminum) so the boats feel very rigid and safe in the water. The 20 degree v allows the boat to cut through chop very effectively and the chine design really lets the boat carve in the corners. They really do handle very well. This boat also has the advantage of a potent engine package and would be extremely stable at speed
Cheers

[Jungle Boy]

The 21's run good in the lake. I had a 21 Sport a few years back and now wish I still owned it. I sold it because the type of boating we were doing at the time required a smaller boat to run the skinny stuff. This boat here,,, Well what is left to say about it,,, nothing. I rode in it at 103 MPH and it is smooth. Very nice boat. Rob rigs a very tight boat.

[Placecraft Dragstar]

Another high end tin boat on the market this week.
This just showed up on our forum so I figured I would post it up for Ryan over at Bohhica Racing
Please contact ryan@bohhicaracing.com for more information. More pictures will be posted at www.bohhicaracing.com in the "For Sale" section.
This Rob C's old boat. Rob started Eagle and is responsible for alot of the hull design and technology you see us continuing to develope today. This was his personal boat and was a real screamer from what I understand. Similar 572/720 treatment so the motor will make about 680 HP on pump gas. Boat has hit 100 and is a 20 degree Steptec boat, not a tunnel!
21' Eagle Sport For Sale $55,000.
21' Eagle Sport Step-Tech
*Rolled wind screen
*Custom Aluminum roll bar
*60gal Plastic belly tank
*Fully carpeted interior
*Auto-Meter Carbon guages
*Dual rack steering
*Eagle RaceTech seats w/ rear padded seat
American Turbine pump, SS impeller, Chrunyk race nozzle
572ci/720hp Chevrolet Crate Motor
*AMS detuned motor to 9.5 comp ratio and it still makes over 680hp
*Original 12.5 piston still in box
*Lightning headers
*MSD ignition
*LESS than 25 hours on entire package
*Lots of custom powder coating, paint, braided hose & aluminum fittings
http://www.outlaweagle.com/forum/files/rob2r_100.jpg
http://www.outlaweagle.com/forum/files/engine__2_165.jpg
http://www.outlaweagle.com/forum/files/rob5_175.jpg
Cheers
Its even yellow:D best color for a boat!!!!

[Xerophobic]

Rob C would agree with you there PC! He won the worlds in 2003 flying his dads colours and number.
http://www.***boat.com/image_center/data/500/RobCTunnel.JPG
By the way I forgot to mention this boat for sale is currently located in the USA
Cheers

[justfloatn]

I'm sorry but the more I look at these boat the more I like them. I am just wondering how the ride out of the river and on a lake. Are they a light boat with a lot of bounce or are they stable?
Jet boats are a blast.. I just wonder about the noise of the water under the hull at 100+. I have a friend with a aluminum jet fishing boat and the noise at 50mph is deafening. The aluminum seems to amplify the sound of the water rushing under it. IMO

[BigDoug]

I really like the lines of these boats !!
Is there a back seat with this yellow boat or can you have one fit in it ?

[Placecraft Dragstar]

Rob C would agree with you there PC! He won the worlds in 2003 flying his dads colours and number.
http://www.***boat.com/image_center/data/500/RobCTunnel.JPG
By the way I forgot to mention this boat for sale is currently located in the USA
Cheers
How much for this boat??

[Xerophobic]

I really like the lines of these boats !!
Is there a back seat with this yellow boat or can you have one fit in it ?
Yes and I just got the best picture yet to show it, give me a min to upload it
Cheers

[Xerophobic]

How much for this boat??
Rob C's World champion 21 tunnel? haha how many arms and legs you got? :D
Seriously I am completely unaware of the current status of this boat but doubt it is for sale. Maybe Dave can verify this but I "think" Rob still owns it???
Cheers

[Xerophobic]

A little dark to show the rear bench seat but at least you can see how much space is behing the front seats
http://www.***boat.com/image_center/data/500/Copy_of_New_Puppies_005.jpg
Rob gettin the 572 tuned up at AMS
http://www.***boat.com/image_center/data/500/Copy_of_April_11_130.jpg