Flow-coat

[HighVoltage 329]

I need recommendations for someone near San Jose Ca. to flow-coat the floor of my 19' Hallett. Quality & Cost are priorities.

[707-CREW]

I have my sanger at canyon marine in lodi...He is top notch and very good guy to deal with. I am suppose to get my rig back this weekend and I will post before and after pics..Call Kevin--he is the owner at 209-518-7575 and tell him Steve O'Connor sent you. About a 2 hour drive for you...I'm in vallejo so it took me about 1.5 hrs......He also owns the blow me taf....so he knows his sh*t.......good luck and post some pics...

[old flat]

I have my sanger at canyon marine in lodi...He is top notch and very good guy to deal with. I am suppose to get my rig back this weekend and I will post before and after pics..Call Kevin--he is the owner at 209-518-7575 and tell him Steve O'Connor sent you. About a 2 hour drive for you...I'm in vallejo so it took me about 1.5 hrs......He also owns the blow me taf....so he knows his sh*t.......good luck and post some pics...
Canyon/ Kevin: good people, good work. Knows his stuff.
STEVE

[HighVoltage 329]

I have my sanger at canyon marine in lodi...He is top notch and very good guy to deal with. I am suppose to get my rig back this weekend and I will post before and after pics..Call Kevin--he is the owner at 209-518-7575 and tell him Steve O'Connor sent you. About a 2 hour drive for you...I'm in vallejo so it took me about 1.5 hrs......He also owns the blow me taf....so he knows his sh*t.......good luck and post some pics...
Thank's what's a ballpark price I should expect?

[707-CREW]

My price was up there because I had a stringer that was delamed, so he had to do a bunch of extra work....I also had every hole in the dash and stringers filled so I could start fresh. I did black stringers, black center, black foot and transom...along with some fiberglass work......But if you were to take it to him all prepped (80 grit) and no other work I would say about 600-800 just to flow it...that price is if you prepped it.....Give him a call.......he's a good guy to talk to....

[colechillin]

He did my Canyon. He filled holes in the stingers, put a new kick board, new transom, layed the carbon fiber floor blacked everything out flow coated and did some gel coat work where the homo who had it before me put a splash guard? It was a little over 4k. I posted some pictures in the gallery section. Dominic who does alot of the work is awesome. Boat came out killer.

[BILLY.B]

I need recommendations for someone near San Jose Ca. to flow-coat the floor of my 19' Hallett. Quality & Cost are priorities.Didn't know these 2 words went together.
OUALITY / COST/ TIME. You can have two but not all three. To answer your question Kevin at Canyon does a great job. I have ColeChillin's boat at my shop right now and the floor looks badd a$$.

[TRG]

But Billy,...I WANT ALL THREE, AND I WANNA SET PRICE FROM YOU TODAY!:D
sorry boss, the Ridelyn took control of me!:D
TRG

[BILLY.B]

But Billy,...I WANT ALL THREE, AND I WANNA SET PRICE FROM YOU TODAY!:D
sorry boss, the Ridelyn took control of me!:D
TRGSounds like you have a problem there Chief.. Problem is there is no way of telling what your gonna get into. Especially if it's preped by someone other then yourself. What happens if the clear were to take a dive (peel/ check/ cloud up). Who's to blame?. I see alot of finger pointing coming at that point. When your dealing with a guy who wants a quality job there is a price to pay for that work.:idea:

[TRG]

WTF???:confused:
I have no idea what you are talking about!...Oh! i see, cocktails and pills!

[colechillin]

Hey Todd. Thanks for the phone call. Started worrying. For people who don't know Todd he does awesome work. I live 500 miles away and he has dealt with my boat over the phone. Stand up guy who I would recommed him to anyone. Billy thanks much! I appreciate the fact you did what you did for the price. Means alot to me man! Thanks again to both of you.

[Bobbo541]

Kevin Felkins at canyon boats did a great job on my 76 cole when i had it flow coated.

[469 the coyote]

I saw your boat over at the shop last nite. Looks like dom had all the holes filled and the delamed cut out. How much you pick that sanger up for?
I have my sanger at canyon marine in lodi...He is top notch and very good guy to deal with. I am suppose to get my rig back this weekend and I will post before and after pics..Call Kevin--he is the owner at 209-518-7575 and tell him Steve O'Connor sent you. About a 2 hour drive for you...I'm in vallejo so it took me about 1.5 hrs......He also owns the blow me taf....so he knows his sh*t.......good luck and post some pics...

[707-CREW]

Kinda wish I just bought a new 501 hull....And by the time I am finished with it I could have bought a new 501. It was turn key when I bought it with a 396...sold that and have a blown 1000hp 540 going in. I know the original owner of the boat so I traded...I already have a nice bike and I like th boating crown better anyway...It's going straight to the paint shop from kevins. I already spent thousands on all the harware, cav plates, pedals, .....well everything...the only thin I will use will be the trailer, hull and fuel tanks....I will post pics as we get closer to being finished...

[707-CREW]

bobo...you have any pics of your floor you could post....?

[HighVoltage 329]

My price was up there because I had a stringer that was delamed, so he had to do a bunch of extra work....I also had every hole in the dash and stringers filled so I could start fresh. I did black stringers, black center, black foot and transom...along with some fiberglass work......But if you were to take it to him all prepped (80 grit) and no other work I would say about 600-800 just to flow it...that price is if you prepped it.....Give him a call.......he's a good guy to talk to....
Did you get the boat back? Happy? Pics?

[396_WAYS_TO_SPIT]

Toddnjuzz does killer work. I saw his work at firebird and it was bitchin........

[707-CREW]

:D I am going to pick it up tomorrow morning.....I will post some before and after pics when i am done staring at it for a few hours...