:wanted:

[RiverGames]

I need cavitation hardware. i need 1/2" turnbuckles and the hardware along with it. such as control arms that connect to the shaft and lower plate mounts.

[RiverGames]

...

[mouzer]

pm sent

[adjones419]

Can you be more specific on which hardware that goes with it? I have some brand new 2" eyelevers from Dana that I'm probably not going to use...they're still in the box.

[RiverGames]

Can you be more specific on which hardware that goes with it? I have some brand new 2" eyelevers from Dana that I'm probably not going to use...they're still in the box.
well. lets see the easiest way to describe it is by looking at the glenwood website. glenwoodmarine.com go to the online catalog and price list. then go to cavitation hardware. the items i need are 9 1/2" turnbuckles item #3001-3010.
i need 9 male boss. item #475. and finally i need 9 stainless control arms for a 7/8" shaft.
hopefully that will clarify things a bit

[RiverGames]

:sqeyes: need cav parts :bump:

[napabob]

There is a set of cavitation plates on ebay, search for Item number: 160189220470
http://cgi.ebay.com/ebaymotors/v-drive-Cavatation-plate-and-hardware_W0QQcmdZViewItemQQcategoryZ26455QQihZ006Q QitemZ160189220470QQrdZ1QQsspagenameZWDVW

[RiverGames]

There is a set of cavitation plates on ebay, search for Item number: 160189220470
http://cgi.ebay.com/ebaymotors/v-drive-Cavatation-plate-and-hardware_W0QQcmdZViewItemQQcategoryZ26455QQihZ006Q QitemZ160189220470QQrdZ1QQsspagenameZWDVW
thanks for the tip, i sent him a email askin if they are 1/2" turnbuckles. they appear to be 3/8". but ya never know.

[RiverGames]

...

[mango madness]

Hi,
this is Mike I think you asked about a blown bbc I have posted,
Anyway I also have all the original plate hardware off of the same Biesemeyer that the engine came out of.
I'm completely rebuilding the boat with all new plates,hardware,etc...
Everything is still in good shape but it is 3/8 turn buckles if you are interested.
I'm only changing it to make it circle race worthy.
Actully a lot of people still use 3/8 today.

[RiverGames]

Hi,
this is Mike I think you asked about a blown bbc I have posted,
Anyway I also have all the original plate hardware off of the same Biesemeyer that the engine came out of.
I'm completely rebuilding the boat with all new plates,hardware,etc...
Everything is still in good shape but it is 3/8 turn buckles if you are interested.
I'm only changing it to make it circle race worthy.
Actully a lot of people still use 3/8 today.
hey mike, i was looking for the thread that had pictures of the biesemeyer. anyways i couldnt find the thread to see pictures so i was wondering if you remember which thread the boat was on?:confused:

[RiverGames]

...

[RiverGames]

:lightsabe

[RiverGames]

:idea: