Steering cable replacement

[Icarus prospector]

The picture attached is of the steering cable and helm that I'm replacing. Take a look at the red jacket and you can see why... Thing is that I've looked all over the various sites and can only find Teleflex which I guess is Morse. No images of the cable end in any of the catalogs show a section like mine, with the transom bracket ball and the support tube.
Are these things removable for installation on the new gear? I see that the support tube is avalable at Rex, but I'm damned if I can figure out if the threaded ends are the same in the promo pics.
Oh.. and naturally the serial numbers and length are worn off the jacket.

[Outlaw]

http://www.***boat.com/forums/attachment.php?attachmentid=45298&d=1197761964I'm pretty sure that aluminum adapter should seperate from the cable.

[502 JET]

It may be cheaper and easier to switch your whole steering system then to try and find a replacement cable. Take a look at the Teleflex Rack, around $160..
http://images.shipstore.com/ss/images/tel/telss141.jpg
Everything you need to know about cables cables go to Teleflex Marine (http://www.teleflexmarine.com/cgi-bin/library.cgi?site=home&type=us&library=1028)

[Icarus prospector]

Thanks 502, yeah, that's the plan, but I need to make sure that the end of the steering cable will match up to the Nicson tiller arm. And I'm going to need a rotary as the're's not a lot of room to the left of the helm behind the dash.

[SinisterGrin]

They sell the rotary's as kits too, how did the old cable attach to the nicson tiller? Just a bolt, should be fairly simple. Little more info? Pics? Teleflex bought morse a while back and its just them and Uflex now since hardin stopped makin steering cables.