Removing the power steering ram on Bravo 1

[tucson_boat_guy]

Hey all,
Wonder if I can get some tip on removing this ram so I can replace it. Maybe a few hints on what to leave and what is needed.
Also what is the best way to remove all of the fluid to change it after I get the new one installed.
Thanks

[pocketchange 22]

Remove the (2) lock tabs on bolts (like 1'') one upper, one underneath. On the end of the cable remove the pin attatched to the tiller arm, unscrew the power steering lines, drain fluid into cup, unscrew the steering cable from ram then slide cable out. Steering ram will be in your hands by now. replace with new ram and don't forget to fill power steering pump with New fluid.:devil: