PDA

View Full Version : cavitation reducer


OntheOutz
12-22-2002, 07:35 PM
hi guys,
pretty much a newbie here. One question about the cavitation reducer, I am looking into getting one. I am familiar with the one dons pump has but was told there is a billet one made in CA somewhere that is supposed to be alot nicer and cheaper. Any body have one of these or are they all the same?
any info would be great.
[ December 22, 2002, 07:36 PM: Message edited by: OntheOutz ]
Rexone
12-22-2002, 07:38 PM
First of all welcome to the forums. We have em. For more info give Bob a call in the am or shoot him an email... sales@rexmar.com.
OntheOutz
12-22-2002, 07:52 PM
rexone,
Do you happen to know who makes it and is it really a billet one piece of stainless? thanks for the welcome
leonard
Rexone
12-22-2002, 07:55 PM
OntheOutz:
rexone,
Do you happen to know who makes it and is it really a billet one piece of stainless? thanks for the welcome
leonard I believe it is billet, real nice lookin piece. Bob or Tom here can give you more detail on it than I can presently though. :)
jweeks123
12-22-2002, 11:12 PM
http://www.donspumpservice.com
http://www.precisionjetdrive.com
try these
jw
canuck1
12-23-2002, 11:22 AM
Talk to Froggy he put one on his ride not to long ago
Jungle Boy
12-23-2002, 12:30 PM
canuck1:
Talk to Froggy he put one on his ride not to long ago Hey Canuck, You still coming to look at the boat?
Builder
12-23-2002, 01:20 PM
CP Preformance in Rhonert Park California makes the Stainless one.It is very nice.
Phone is
707-585-9871
[ December 23, 2002, 01:21 PM: Message edited by: Builder ]
sdba069
12-23-2002, 09:58 PM
I've been running a DPS unit since they first came out.I've probably installed 50 + .They have worked on everything we have ever put them in.They run $369 and usually about $50 to cut the shaft.All my pump rebuilds include turning the shaft for the cav reducer,whether we install one or not.This way,if the customer decides to go with one later on,we don't have to pull the pump all the way down.I always chuck the shaft up in the lathe anyway to check for runout,so it's no big deal to turn it.
Garry
canuck1
12-23-2002, 10:38 PM
Jungle Boy:
canuck1:
Talk to Froggy he put one on his ride not to long ago Hey Canuck, You still coming to look at the boat? Are you home yet?