What kind of boat mold is this

[flattie]

Anyone know what kind of mold this hull might be found it out in a field by the railroad tracks
http://www.***boat.com/image_center/data/520/709DSC01733-med.JPG

[Cs19]

lol. is that a jet hydro? if it is leave it there cause thats where it belongs.

[82SleekCraft]

flattie:
Anyone know what kind of mold this hull might be found it out in a field by the railroad tracks
http://www.***boat.com/image_center/data/520/709DSC01733-med.JPG Looks like a mold for a boat hull (j/k) wink wink :p :D

[flattie]

Now thats fricken funny! Laugh my ass off!

[wsuwrhr]

It looks some like kind of v-bottom hydro. Run away from it.
Brian

[Jake W]

Looks like the bottom of a Infenity hydro V bottom.It is like a Southwind ect with sponcens(sp ) on the front.You never know what you will find at the tracks????
Jake

[Jim Brock]

It's a old crusader mold, it was a veebottom with hydro sponsoms added to it, it didn,t work to well, i think it was almost 20ft long, there tunnel boat worked very well, Jim

[HOSS]

Why don`t you burn it? :p

[1Bahnerjet]

If fact there was a Hot Boat of the Month (in Hot Boats Mag.)A yr or so ago same type of Hull,It was Orange Color and I think the Owner Lived in Havasu. Name of Boat Was "Bowel Movement" It had Daffy Duck sittin on the pot Painted on the Deck. :D
-------------
Thats BANNER with an H

[flattie]

I have some 1/2 sticks of DYNOMITE maybe I will drive by and blow it up! So no body ever does anything with it. I would hate to see another piece of shit on the water

[HOSS]

You could always drag it too your house. Set it next to your `75 Sanger when you buy it. Fill them both with topsoil and grow tomatoes. wink

[Jake W]

Hey Hoss you got a pic of that Southwind of yours?
Jake wink

[HOSS]

Yeah, I emailed them to someone who posted them before. polaroids that I scanned. Got a digi now so I will one day take the cover off and snap a few to post.

[1Bahnerjet]

HOSS:
You could always drag it too your house. Set it next to your `75 Sanger when you buy it. Fill them both with topsoil and grow tomatoes. wink Not too Far From the Truth, There was A Guy who Found a Cole TR2 in some Guys Backyard Filled with Sand! his Kids were useing it as a Sand Box! He dug the boat out and Restored it. (true story)
--------------
Thats BANNER with an H

[TX Daytona]

A Southwinds ECT with sponcens. Hum, that would be a Breakwind wouldn't it?

[Jake W]

A BREAKWIND now that is funny. idea
Jake

[1Bahnerjet]

Flattie, This is an Infinity, It has 18-degree Jet Hull in rear, and Hydro Sponsons in Front. I couldn't fit the whole Picture (Scanner bed too Small) but you get the Ideal.
http://www.***boat.com/image_center/data/500/43Infinity-med.jpg
---------------
Thats BANNER with an H

[PipesClean]

That's Nelson Lengle a very good friend of mine out of Havasu. He builds engines out of his garage out there under the name Xtreme Performance Marine. He's an X Top Fueler Owner and a God Damn Engine Genius. He's finishing mine up this weekend! I believe that boat past the 100 MPH mark.

[1Bahnerjet]

Yeah its packing some power, to the tune of 1,000HP, This is the Cartoon Picture Painted on Deck. The boat is 21'6" long.
http://www.***boat.com/image_center/data/500/43BowMo.jpg
-------------
Thats BANNER with an H

[eliminator777]

THAT Was my yellow boat it was a Wellcraft hullnumber,called Infinty I owned the bow movement For 30 years It came out of the mold feb 14 1977 hull number WEL000777 I raced the thing as a single blow'n GAS jet it went 124 with a 4.375bore x4.500 stroke HILBORN INJ. BOWERS BLOWER made it in to a cruiser.It now is alive and well in oklahoma Sold it to a friend by the name of BILL NABORS. POP<BRIEN Davidson sr.> from HOT BOAT thought it was Kool. :p :p :D :D :cool: