Blown509Liberator
09-03-2002, 05:42 AM
The Hull
1999 21' Liberator Pickle fork tunnel hull. ( same bottom as the older Daytona's)
2 25 gal tanks ea with there own Mallory 140 comp fuel pumps.
Lighting Rail engine mounting system
Set back Berkeley Pump with G bowl ( unmodified) /w Shoe (back cut and 1 deg taper) and ride plate (MPD)
Legend SS Impeller (Race prepped buy MPD to spin at 6k with 850hp)
Hydraulically controlled Place diverter.
200 amp Stereo/CD player with 2 10 subs and 2 6x9
2 droops ( old long Berkeley and Aggressor)
Gil Off Shore Exhaust manifolds W/ 4" threw hull tips with bolt in baffles.
Dual axel Trailer.
Power: Two to Choose from
A-Dart block Blown 509 w/ 0 hr (have all receipts)
Dart 345 heads
Scat Crank
SRP pistons
Eagle ESP rods.
Custom Cam from DNE
Full roller valve train
Jesal Shaft rockers
Jesal Belt drive (cam)
10 qrt pan
Teflon tipped Littlefield Blower
850HP
or B-GM 502/502 ( about 100 hr)
Gen block with aluminum heads
a stock
I will help with transportation arrangements.
Hull $14,000.00
W/ 509 $27,500.00
w/ 502 $18,000
Michael Whitehead
847 791 4140
847 587 7516
http://nothinbutjets.homestead.com/files/15.JPG
http://nothinbutjets.homestead.com/files/m10.jpg
http://nothinbutjets.homestead.com/files/M0007.jpg
[ November 18, 2002, 06:25 AM: Message edited by: Blown509Liberator ]
1999 21' Liberator Pickle fork tunnel hull. ( same bottom as the older Daytona's)
2 25 gal tanks ea with there own Mallory 140 comp fuel pumps.
Lighting Rail engine mounting system
Set back Berkeley Pump with G bowl ( unmodified) /w Shoe (back cut and 1 deg taper) and ride plate (MPD)
Legend SS Impeller (Race prepped buy MPD to spin at 6k with 850hp)
Hydraulically controlled Place diverter.
200 amp Stereo/CD player with 2 10 subs and 2 6x9
2 droops ( old long Berkeley and Aggressor)
Gil Off Shore Exhaust manifolds W/ 4" threw hull tips with bolt in baffles.
Dual axel Trailer.
Power: Two to Choose from
A-Dart block Blown 509 w/ 0 hr (have all receipts)
Dart 345 heads
Scat Crank
SRP pistons
Eagle ESP rods.
Custom Cam from DNE
Full roller valve train
Jesal Shaft rockers
Jesal Belt drive (cam)
10 qrt pan
Teflon tipped Littlefield Blower
850HP
or B-GM 502/502 ( about 100 hr)
Gen block with aluminum heads
a stock
I will help with transportation arrangements.
Hull $14,000.00
W/ 509 $27,500.00
w/ 502 $18,000
Michael Whitehead
847 791 4140
847 587 7516
http://nothinbutjets.homestead.com/files/15.JPG
http://nothinbutjets.homestead.com/files/m10.jpg
http://nothinbutjets.homestead.com/files/M0007.jpg
[ November 18, 2002, 06:25 AM: Message edited by: Blown509Liberator ]