whos got any jets for sale

[geraldscp1234]

theres got to be more jets out there for sale

[Jet Hydro]

I`v got a few...How fast do you want to go and How much $$$$$$$$ Do you want to dump?

[Cs19]

dragboats.com has some

[Eric455]

i have an 18' eliminator jet for sale. 1975 eliminator berk jet with "A" imp. no PD on the jet. 468 BBC that has less than 20 hours on it. 600+ hp. trw 9.5:1 pistons arp rod bolts 4 bolt main. stnd/stnd steel eagle crank. solid cam 582/620 exhaust lift. 990 squar port heads roler rockers, single plane polished intake, holley 830 pro race carb with crome bowl's. new bassett OT headers. 10 qrt pan, polished/flamed valve covers. too much to list i'll send you pictures tomarrow. e-mail for any questions. asking price 7900 obo.
araik2000@earthlink.net
eric
[ June 11, 2003, 10:38 PM: Message edited by: Eric455 ]

[Rubths]

Got this 77 Miller for sale with a fresh 500hp 454 and fresh pump. Boat is super clean and fast 70+mph.

[Eric455]

what impeller those that miller have in it?
eric

[Johnwithjm]

A buddy of mine is selling his 76 Rogers bubble deck the boat has some gel chips but other than that it runs strong. The boat has a 454 chev with 50 hours on the motor and it has a berk pump rebuilt 2 trips ago. The boat has new carpet and good int. Bimini top and a place divertor. Email me or call me for all the info
Thanks John

[Jet Hydro]

I`v also got an O/B for sale
http://forums.***boat.net/ubb/ultimatebb.php?ubb=get_topic;f=9;t=000624

[Doug H.]

if you remember correctly jetboatrich went to a wedding last sat. burningm eric stayed to fix the boat but couldn't find the right parts so what do you think he did next :D .....................................YES HE USED SILICON, now that richs' boat is out of commition, WE KNOW WHY.. :D now all of a sudden eric is selling his boat..hmmmm :rolleyes: could there be something wrong with it (not float)...(bottom has cracks)..etc ? OH WAIT, WE KNOW HOW TO USE SILICON. :D "ERIC THE SILICON 455" ..sorry eric just couldn't resist.from all your buds this ones for you."THE ROLL OVER COMMANDER"...doug

[Hotcrusader76]

Doug H.:
if you remember correctly jetboatrich went to a wedding last sat. burningm eric stayed to fix the boat but couldn't find the right parts so what do you think he did next :D .....................................YES HE USED SILICON, now that richs' boat is out of commition, WE KNOW WHY.. :D now all of a sudden eric is selling his boat..hmmmm :rolleyes: could there be something wrong with it (not float)...(bottom has cracks)..etc ? OH WAIT, WE KNOW HOW TO USE SILICON. :D "ERIC THE SILICON 455" ..sorry eric just couldn't resist.from all your buds this ones for you."THE ROLL OVER COMMANDER"...doug Damn...talk about the "Anti-Spam". It's always nice to have friends around when ya need them. :D

[revndave]

I HAVE A 92 CARRIBEAN 19 BLOWN INJECTED.RUNS HARD.BOAT LIKE NEW.LOOK AT BLOWN WAGES THREAD

[Rubths]

Eric455:
what impeller those that miller have in it?
eric Im running a full B

[HOOTER SLED-]

geraldscp1234:
theres got to be more jets out there for sale Check mine out in the Image Center in my photo album(HOOTER SLED-).
HOOTER

[lakesmodified]

geraldscp1234:
theres got to be more jets out there for sale Gerald, check out my profile.... There's a picture there.... I'm not actively sellling it, but I was contemplating placing it on ebay. Have all receipts of all the work I did to the engine at the end of last season. 1982 17FT Targa, full length stringers. Zero hours, just cam run-in time. BDS 671 Blown .030 over 460, ported and polished heads, HP valves, Crain double springs, Comp Cams roller rockers, etc etc... Dual 48 IDF Weber carbs, hydraulic place diverter.......$8500.00 Ivan
[ June 12, 2003, 09:23 AM: Message edited by: lakesmodified ]

[SoCalPower]

I have a 1982 19' California Performance for sale. Tandem axle trailer. No engine, no jet, no seats. Has Berkeley intake w/shoe, ride plate and extended fiberglass T/A $5000.00 909/789-6179

[dgie]

I have a 76 tailer jet, no engine, no pump, no seats, no hull, no trailer $4000.00 obo
sorry could not resist :)

[SANGERBRU]

I have a 1974 SANGER MINI-DAYCRUSIER FOR SALE. mint cond., LS-7 powered, new floor, interior, tanks, ss impellar, pump blueprinted, new seats, carpet, sunbrella cover, etc., 10k spent recently. Will take $11,000 cash. brupus@aol.com

[Liquid Life]

geraldscp1234:
theres got to be more jets out there for sale I have a 1993 19' Kachina open bow

[Bense468]

My boat is for sale. With motor or less motor. Here is a pic. PM or e-mail if you would like details. A few things have changed since the pic. Like new heads, cam, Intake, and carb.
http://www.***boat.com/image_center/data/521/731jeff_boat-med.jpg

[Bense468]

bump

[20SPECTRA]

I got a 1977 20ft spectra with a fresh 460 and fresh berkley. Asking 8,500

[79Hawaiian]

979 Hawaiian jet 20.5ft 460 Ford, Jacuzzi setback jet. has tandom trailer, chrome rims, bimini,new this year:seats,floor,carpet,carb,guages. Engine and pump rebuilt a few years ago. Hull has stress cracks but fully functional. Could use paint job. No rust on trailer, new bunks.
$3900
Robert (818)402-8596
http://boener.com/pics/boat/back-in-water.JPG
http://boener.com/pics/boat/boatseats-finished.jpg
http://boener.com/pics/boat/6.jpg
[ June 16, 2003, 10:17 PM: Message edited by: 79Hawaiian ]

[SoCalPower]

dgie:
I have a 76 tailer jet, no engine, no pump, no seats, no hull, no trailer $4000.00 obo
sorry could not resist :) I'm laughing. I little too much disclosure, you think?
I did see a clean 73 Howard w/ 455 Olds and Berkeley for $3000.00 at the river last weekend.
db
[ June 17, 2003, 04:28 PM: Message edited by: SoCalPower ]

[Badboat1]

My boat is going to be up for sale soon
20 foot Liberator Dominator pump 572 CID carb engine makes 800hp and 736ftlbs Will sell less engine with all the hardware for a install including msd box mutistep retard and digiset timer.Electric over hyd place divertor and wired for nos.Boat has had bottom worked and pump blueprinted.Will run over a 100mph
http://www.hotboatpics.com/pics/data/2/223Texoma_0007-med.jpg
BB1
[ June 17, 2003, 04:48 PM: Message edited by: Badboat1 ]

[hboldno7]

73 Kona, 455 olds, Berkley Pump, Jetovater, Thru hull exhaust, enclosed engine compartment. Boat is Clean inside and out, will run 60 all day long. $4200

[AZKC]

Me likey, 100mph+ eek! Very kewl
KC

[Bense468]

Socal Look closely at my crossover on my boat in the picture above? Notice anything?

[BigBoyToys]

My Jet Boat is still for sale
See Pics Here (http://www.pritek.net/jetboat.html)

[CALIFORNIA PERFORMANCE]

79 hawaiian could i get more info on boat. My buddy is intrested.

[Duke]

CALIFORNIA PERFORMANCE:
79 hawaiian could i get more info on boat. My buddy is intrested. So am I!
Check your P.M's

[79Hawaiian]

CALIFORNIA PERFORMANCE:
79 hawaiian could i get more info on boat. My buddy is intrested. What do you want to know? Call my cell at (818)402-8596. I live in Northridge

[Jim Brock]

19ft glencoe mini cruiser, 455 0lds, stock 10qt pan, berkeley jet, new cables, batt, trailer painted ,sigle axel new tires and wheels, boat is white with orange trim $3900.00 JIM (818)890-1867

[jester]

I've got a jet boat for sale too, look here: jet boat 4 sale (http://forums.***boat.net/ubb/ultimatebb.php?ubb=get_topic;f=11;t=002833) more pics available upon request!

[SoCal Power]

Bense468:
Socal Look closely at my crossover on my boat in the picture above? Notice anything? Looks good. Are you running a thermostat? I can't quite make out if that's a bypass coming out of the top of the crossover.
Good luck on the sale of your boat. What are you buying next?

[1riverrat]

I have a 1978 texas gullwing $6500 with 429 ford or $4500 with out (909) 212-8640
http://www.***boat.com/image_center/data/523/684IMG004.JPG
http://www.***boat.com/image_center/data/521/684texastunnel.jpg

[79Hawaiian]

What's it take for a guy to sell a boat round here??? :cool: $3500, almost free!
-Robert cell 818-402-8596
http://boener.com/boat/1.jpg
http://boener.com/boat/4.jpg
http://boener.com/boat/6.jpg
http://boener.com/boat/7.jpg
http://boener.com/boat/8.jpg
[ June 19, 2003, 11:43 PM: Message edited by: 79Hawaiian ]

[Froggystyle]

This is for sale. Beautiful rigging, just needs gel.
http://www.***boat.com/image_center/data/500/128DCP01587-med.JPG
http://www.***boat.com/image_center/data/500/128DCP01200-med.JPG
http://www.***boat.com/image_center/data/500/128colage3.jpg
http://www.***boat.com/image_center/data/500/128DSCN0218-med.JPG
http://www.***boat.com/image_center/data/500/128DSCN0330-med.JPG
Inside at night !!
http://www.***boat.com/image_center/data/500/128MVC-010S-med.JPG
http://www.***boat.com/image_center/data/500/128DSCN0329-med.JPG
460 BBF, decked block, double valve springs, wieand intake, 780 4 bbl carb, logs, isky cam, melling oil pump,dooley pan, MAC windage tray, doulbe oil filters,12JC pump,A impeller,trim tabs, new Rex guages (water temp,oilpress,tack,volts,oil temp) new floor (with a trick ski locker support) and carpet as well as new fiberglass and gel coat on keel (was getting thin),new auto bilge pump, sony amps, 2 MTX 12in subs, 4 polk audio 6.5's, sony cd player, all guage and nav lights work, great for daytime cruising and nightime partying !! double axle trailer with new wiring, fenders, bunks and keel support. All floor/gel work done by havasu barney, motor work done by Ben Alameda.
[ June 20, 2003, 12:47 AM: Message edited by: Froggystyle ]

[Bense468]

Thanks SOCal and yes it is a bypass. It is set up a little different today then it was in that picture.
Nice rigging froggy. I did mine like that too Just used about 1/2 of the zipties you did. Its amazing how many you go through doing that shit.
BTW My boat is still for sale
http://www.***boat.com/image_center/data/521/731jeff_boat-med.jpg