New Interior?

[hack job]

ok guys it was suppose to be doe today but as ussal it will be done tomorrow. here are some pics from today!
http://www.***boat.com/image_center/data/520/36DSCN1996-med.JPG
http://www.***boat.com/image_center/data/500/36DSCN2003-med.JPG
and one more .
http://www.***boat.com/image_center/data/500/36Dscn1997-med.jpg
so i should get some more up tomorrow eve or afternoon!

[HBjet]

Nice!
Oh, and I would say that sucks about being done today and it's not...... But I'm still waiting on D&S to finish fixing my stripes that they did backwards from last year. I only gave them the seats the 1st of Feb.
Looks good, so what's next and how long until your on the water?
HBjet

[HBjet]

Oh, are we going to have a "Best Interior" catagory for the CBBB this year? I think we should.
HBjet

[Bense468]

Looks real good. That front seat looks hard to slide into though. Are the seats custome built?

[HalletDave]

"Best Interior" catagory for the CBBB this year? That, plus the best original interior. :D
HD

[hack job]

i dont think we will have a best interior . sorry its not really some thing that we were looking at. but on the smae note who knows what we will have!
thanks guys
as for the seats being custom yes they are . and tough to get in to we will see. i hope not cause iam not the smallest guy! wink

[Hotcrusader76]

Nice seats Tyson! I am looking to get a new interior this year and both your set-up and Randy's have inspired some of my new ideas.
What's up with D&S? I heard alot of negative comments about their work ethics...
Not to hi-jack this thread as they call it, but explain why D&S isn't stepping up to the plate on some of these issues...
~Ty

[hack job]

one of the reasons i didnt go with them . plus they told me it would take atleast 5 weeks and that is too damn long ( that menas it will take atleast 7 lol)i know that they do good work but i ave heard some stories about them taking too long and, not fixing there probs right away. i could be wrong i just had a good deal and went with it. wink

[HBjet]

My dealings with D&S have still been pretty good for one reason: PRICE vs Quality
The quality of my interior and install is some of the best I've seen, and I got a smoken deal!
First, let me point out there are (2) D&S Marine Interior shops. The main one is in Riverside, and the other one is in El Cajon next to Ultra Boats.
I took mine to the D&S next to Ultra Boats.
Before I took it down there, I got the basic price out of the way, but we didn't discuss anything else. When I got down there, Sal (who ownes/runs that shop) was about an hour late, but I didn't mind because I was still deciding on colors which took me 2 hours total. I talked to Sal about what I wanted exactly and then we set on a price.
What I got was New Wood and Interior, carpet from the transon to the bulkhead, and then carpet all the way up the front ski locker area. Pockets on the backs of my cocktail seats, and frenched stitching. $1790.00 is what I paid. He told me it will take 4-5 weeks. It took 5 weeks. Then next week, I was looking at my interior and I noticed the stripe pattern on one side was correct for the rear cocktail seats, but the other side was not. So, I called Sal and he said he will correct the problem, but it will have to wait another 5 weeks........ I was pissed, then he said or I can use the boat all summer and then bring the interior back to him during the Winter and he will also fix anything else that may be wrong by that time. So, I was cool with that. Well, I'm not pissed yet because I still need to get some power in my boat, but I don't want to be held up on the seats either. So, they should be done this weekend, and I plan on going and picking them up.
here is a photo, look at the strips on the rear cocktail seats and you will see what I mean. No one noticed it and it took me a week.
http://www.***boat.com/image_center/data/500/20DSCN6842-med.JPG
the wrong pattern is on the passanger side, the correct is the drivers side. From the front or top, it should go Blue, Grey, Charcoal.
HBjet

[77charger]

My buddy took his placecraft to d&s also in el cajon.Said one week but took more.Also got a smokin deal,new everything for the seats plus some cool side panels that go by your feet even with drink holders.Took almost a month but the quality was excellent and he was very happy with the end result and the money saved.

[SPECTRABRENT]

Tyson,
Looks great!
Do you still need the SPECTRA name plates?
I am picking my boat up on Sat..
Brent

[hack job]

SPECTRABRENT:
Tyson,
Looks great!
Do you still need the SPECTRA name plates?
I am picking my boat up on Sat..
Brent thanks and yes i still need them!

[SPECTRABRENT]

Let me know when you are going to be up this way.
Brent
818-621-5626

[77charger]

Hey hack i am waiting to hear how that L5 sounds. boxed boxed
Interior looks good back seats look comfy.

[Hustler]

Very cool Tyson, I like the way they built the seats. Who's doing them?

[hack job]

Hustler:
Very cool Tyson, I like the way they built the seats. Who's doing them? stitchcraft (http://www.stitchcraftinteriors.com/) thanks for all the complements. ill see if i cant get more up later today. wink

[Squirtcha?]

Lookin good hack. I especially like the size of em. Mine are getting a little on the tight side for some strange reason. On a good note....it forces me to drop a few pounds each summer, just so's I can squeeze into em. It's my annual ass downsizing program.

[cyclone]

wow man that looks spectacular!! how long til i get a ride in that thing?

[hack job]

iam guessing two or three weeks!
when is yours hitting the water? i heard maybe this weekend? wink

[HOOTER SLED-]

Looks bitchen Hack. You gonna get that thing out local anytime soon?? Sunday is my first run.

[Hermosa]

I really like those seats, the bak seat is especially freakin nice. We want complete photos when all is done.

[stonehedge]

Those look great! Is that a cooler in the back? If so how much does it hold and does it have a built in drain? And the comment about fitting in the seat, thats what holds me in. Or my ass, at least.
[ May 16, 2003, 09:40 AM: Message edited by: stonehedge ]

[hack job]

stonehedge:
Those look great! Is that a cooler in the back? If so how much does it hold and does it have a built in drain? And the comment about fitting in the seat, thats what holds me in. Or my ass, at least. it can be a ice chest i would assume it would hold about 10 beers er sodas wink and ice. it dose have a drain . as for my ass that most f the reason i went with this style of seating.lol iam not a small guy! also not huge. :D

[hack job]

ok guys here is the pics of it finished! sorry it took so long to upload i have been busy!
http://www.***boat.com/image_center/data/520/36DSCN2019-med.JPG
http://www.***boat.com/image_center/data/520/36DSCN2020-med.JPG
http://www.***boat.com/image_center/data/520/36DSCN2021-med.JPG
http://www.***boat.com/image_center/data/520/36DSCN2022-med.JPG
http://www.***boat.com/image_center/data/520/36DSCN2023-med.JPG
http://www.***boat.com/image_center/data/520/36DSCN2024-med.JPG
it turned out better than i could have hoped for the space looks to be off but its not sat in the back seat and it was quite nice and the front seats have nothing to complain about either> i cant beat there speed or there quality check them out!
Stitchcraft (http://www.stitchcraftinteriors.com/)

[Windy]

Looks very nice and clean.
MissHBjet

[BrendellaJet]

Tyson- your boat kicks ass!

[XClutchboy725]

Lookin' sweet Ty! You've been one busy guy!

[hack job]

thanks guys it have been busy and it dose look pretty good! lol really thought i very happy with the out come. :D wink

[stonehedge]

Very nice! No "healthy girls" in those back seats. Even better! Nice design also, those turned out crazy nice.

[cyclone]

hack job- I didn't make it out to elsinore this weekend because i spent the weekend at RD's shop machining billet parts for my boat. i'll definately have her ready for this weekend though. Congrats on the boat man- definately one of the nicest spectras i've ever seen. those seats are the bomb!

[Tom Foolery]

Wow! its really looking good Ty.

[spectras only]

Tyson your 19 came out really nice.Why bother with a new boat when you can keep a classic that's recognizable wink .I'm just about finished with my new interior on the 24 spectra,and the only thing left is the hydraulic hatch to be made. BTW, are you going to have your bay open or closed?

[hack job]

thanks guys!
wink wink wink :D :D :D
mike , sounds like you have got some cool stuff going on .lets see.
and spectras only it will be a open bay due yto the fact that is a tunnle ram motor and a set of lighting headers. keep up the good work on the 24 and lets see some pics of it as well.