PDA

View Full Version : Ski Pylon



BP1330
08-07-2002, 07:28 PM
I am looking to add a custom ski pylon to my boat. Any one have any suggestions on shops in the Riverside/Corona area?
[ August 07, 2002, 08:50 PM: Message edited by: BP1330 ]

nextasex
08-07-2002, 08:09 PM
take the boat to the manufacturer, i'm sure they have done one before. if you want aftermarker and you wanna do it yourself, check out overtons.

BP1330
08-07-2002, 08:21 PM
Thanks but I have a 1980 18' Nordic. Nordic is no help. They don't build boats like mine any more. Also I don't want a bolt on. I know there is a place in the 909 that does it. Hopefully some one can help.

kevnmcd
08-07-2002, 08:33 PM
BP-I bought one of these for my boat and it works great. I can put it up when I need it and then take it down when I am done. It takes about 3 minutes to put up and take down. They are in Canyon Lake area (Lake Elsinore).
Air Boom (http://www.airboom.com/prod1.htm#uab)
Not that hard to install, either. I did it myself in an afternoon. :D
[ August 07, 2002, 09:34 PM: Message edited by: kevnmcd ]

HM
08-07-2002, 09:06 PM
Check with Tige' in Corona. Especially now that they have the new v-drive boats with pylon mounted where you probably want one.
They can sell you the pylon separately, and you can try to install yourself.
Air Boom is a good alterantive for a bolt on.
Skylon also, and Skylon goes through the Malibu dealer in Riverside.

Steamin' Rice
08-08-2002, 05:02 PM
MY ski pylon is from Dana marine and works pretty well....It mounts to the front of the motor...
[ August 08, 2002, 06:02 PM: Message edited by: Steamin' Rice ]