~

[superdave013]

filled
[ December 17, 2002, 08:25 AM: Message edited by: superdave013 ]

[miller19j]

What is the pay scale for a Draftsman these days?

[superdave013]

miller19j:
What is the pay scale for a Draftsman these days?We are pretty open to that right now. I would say it would be 40K on up. The right guy could make his own deal. We give a smokin bouns too.

[miller19j]

I am pretty happy where I am. I was just curios. I don’t think I could go back to working in 2D though, once you do the 3D thing you can’t even think of working in 2D except when making prints.

[75_Elim]

If there are any Financial/Production Analysts that are looking for a change or start, shot me an email.
We have an open position in my group that needs to be filled soon.

[carreraelite]

Any on the job training?? :D
[ December 03, 2002, 03:36 PM: Message edited by: carreraelite ]

[superdave013]

miller19j:
I am pretty happy where I am. I was just curios. I don’t think I could go back to working in 2D though, once you do the 3D thing you can’t even think of working in 2D except when making prints.Hey, if the guy wants to do it in 3D that would be fine too!

[RandyH]

Speaking of ACAD, we have V2000 here at the office and does anybody make any freeware that will convert a .dwg file to a .pdf or .jpg. I just found that Adobe has some but you have to pay... Thanks In advance.
Randy

[ROZ]

75_Elim:
If there are any Financial/Production Analysts that are looking for a change or start, shot me an email.
We have an open position in my group that needs to be filled soon.What, are you leaving for that boat building career already? eek! or, are you finally opening that strip club? :D

[miller19j]

RiverDave:
Any of you engineers need any Rapid prototyping work? :)
RDMaybee....Do you have some info?

[andy01]

miller19j:
RiverDave:
Any of you engineers need any Rapid prototyping work? :)
RDMaybee....Do you have some info?PM RiverDave, that is what he does.
Andy

[Jrocket]

superdave013:
We are looking for a Auto Cad guy to do 2D mechanical drafting and electrical schematics. This is a good opportunity for someone.
We are located in Anaheim, CA. If you or anyone you know can do it give me a call at 714 632 9801. Ask for Dave BottomleyHell yes,sign me up.When do I start?

[kevnmcd]

RandyH:
Speaking of ACAD, we have V2000 here at the office and does anybody make any freeware that will convert a .dwg file to a .pdf or .jpg. I just found that Adobe has some but you have to pay... Thanks In advance.
RandyRandyH-I don't know of any shareware out there that will do that, but I can say that Adobe is well worth it...it works slick!

[75_Elim]

ROZ:
75_Elim:
If there are any Financial/Production Analysts that are looking for a change or start, shot me an email.
We have an open position in my group that needs to be filled soon.What, are you leaving for that boat building career already? eek! or, are you finally opening that strip club? :D Roz, you know you were my best dancer!! How could I start another club without you working there? http://www.plauder-smilies.com/party/dance2.gif

[Aduner2]

Hey RD
Company I work for is doing some Rapid Protoype work with a company in Texas. It would be nice to find a closer source.
Please send some company bio to my e-mail and I will be in contact.
Thanks
ED
aduner2@yahoo.com

[SchellSchock]

As long as we are posting job openings...
I am looking for a CNC programmer to start after the first of the year. Prefer some one who has used "SDRC Ideas". My company machines precision components for the ground based turbine industry and for cylinders for military and commercial aircraft.
Reply to: daves@jaycraft.com

[126driver]

RandyH:
Speaking of ACAD, we have V2000 here at the office and does anybody make any freeware that will convert a .dwg file to a .pdf or .jpg. I just found that Adobe has some but you have to pay... Thanks In advance.
RandyDoesn't Volo Viewer do that? Or how about SnagIt by Techsmith? http://www.techsmith.com/products/snagit/default.asp

[Powerquestboy]

Anyone know of a job in Marketing & Business development? I have done M&BD for a civil Engineer for the past 3 years and am looking at other opportunities. Any help would be greatly appreciated.

[Blown 472]

Anyone looking for someone to do cad work, machine installation, start up and process issue work?? In the upper midwest, get ahold of me.

[RandyH]

126driver:
RandyH:
Speaking of ACAD, we have V2000 here at the office and does anybody make any freeware that will convert a .dwg file to a .pdf or .jpg. I just found that Adobe has some but you have to pay... Thanks In advance.
RandyDoesn't Volo Viewer do that? Or how about SnagIt by Techsmith? http://www.techsmith.com/products/snagit/default.aspThanks < i will check these out. :)

[HighRoller]

Hey SuperDave,is it possible to"Telecommute"in this job?Or are the files too big to send in cyberspace?I'd love to finish up my AutoCad classes and maybe learn CNC work too.

[superdave013]

HighRoller:
Hey SuperDave,is it possible to"Telecommute"in this job?Or are the files too big to send in cyberspace?I'd love to finish up my AutoCad classes and maybe learn CNC work too.Nope, In house full time spot.

[gnRacer98]

Do I get to draw BOAT parts???
Throw in a sponsorship on an SS or Gn and I'll take the paycut. I'll provide the boat you pay the bills.
Getting tired of drawing squirrel cages for the condo-commando crowd.

[VD CRUISER]

gnracer98,
This may be a little off the original topic, but what hulls other than Rayson Craft do you guys use for GN racing? Also are there 20 & 21 Raysons used ?

[gnRacer98]

VDCruiser, themain stays of GN racing are the Raysoncraft and Rush Boats. The Raysoncrafts are 10 deg. v-bottoms in either a low profile 19' or a 21' cruiser, some of the cruisers are chopped 6" for a lower profile (IE: GN790). The Rush is 21' and more of a flatbottom with a shallow 'V'. Both Hulls are built in S. Calif.
There is also currently a Frah's on the circuit, a lighweight splash of the Rayson 19', I don't believe they are still in production. Several people have tried Schiadas, Spectras and Howards, but the handling under race conditions does not compare. I started GN racing with a 19' Schiada (Howard now has the mold), very similar hull to the 19' Rayson, but at race speeds it was like driving a compact car vs an SUV, the weight and bottom design is night and day difference.

[PussyPusher]

There is a program out there called dwgtopdf it is freeware just search for it in Google....
Shawn

[VD CRUISER]

Thanks gnRacer98, I thought I had seen a Schiada and a Rush on speedvision, racing at Long Beach. I take it the Rayson would make a good river boat.

[Cheyenne 572]

Yes i need a job but i'm a Machinist of 20+ years not what you are looking for.If there's anyone out there looking for a machinist pm me thank you.I live in Phoenix Az but you know that.Later
Cheyenne 572