ColeChillin'
03-16-2006, 09:23 AM
Yesterday I tore down my Cole so I can redo some things, and kept finding things I wanted to fix. I found some little stress fractures where the left stringer meets the floor back where the engine sits. They are only on the outside of the stringer, none in the bilge area. They look to be about 1-2 inches long and they look like the resin cracked. No matting is torn, and everything is very very solid. Do I need to get these repaired, or do all boats get them? I need an educated answer please.
http://www.hotboatpics.com/pics/data/500/6757DSC00249-med.JPG
And then theres this lone little stress fracture all by itself about a fot away from the others. Its about 6-8 inches long, and again looks like just the resin cracked, but should I do something about it or leave it?
http://www.hotboatpics.com/pics/data/500/6757DSC00251-med.JPG
then theres this little gem, I know this needs repair. You can see the crack in the center bottom, and there are two cracks at the top on each side. The glass and wood are broken, but the hull is sound. Do I need to cut this whole piece out and glass a new one in, or can I cut pieces of wood, and brace the fractures and glass them in?? This piece is one foot forward of where your feet go.
http://www.hotboatpics.com/pics/data/500/6757DSC00254-med.JPG
Here are some various other pics
http://www.hotboatpics.com/pics/data/500/6757DSC00259-med.JPG
http://www.hotboatpics.com/pics/data/500/6757DSC00253-med.JPG
http://www.hotboatpics.com/pics/data/500/6757DSC00244-med.JPG
http://www.hotboatpics.com/pics/data/500/6757DSC00247-med.JPG
Thanks-Josh
http://www.hotboatpics.com/pics/data/500/6757DSC00249-med.JPG
And then theres this lone little stress fracture all by itself about a fot away from the others. Its about 6-8 inches long, and again looks like just the resin cracked, but should I do something about it or leave it?
http://www.hotboatpics.com/pics/data/500/6757DSC00251-med.JPG
then theres this little gem, I know this needs repair. You can see the crack in the center bottom, and there are two cracks at the top on each side. The glass and wood are broken, but the hull is sound. Do I need to cut this whole piece out and glass a new one in, or can I cut pieces of wood, and brace the fractures and glass them in?? This piece is one foot forward of where your feet go.
http://www.hotboatpics.com/pics/data/500/6757DSC00254-med.JPG
Here are some various other pics
http://www.hotboatpics.com/pics/data/500/6757DSC00259-med.JPG
http://www.hotboatpics.com/pics/data/500/6757DSC00253-med.JPG
http://www.hotboatpics.com/pics/data/500/6757DSC00244-med.JPG
http://www.hotboatpics.com/pics/data/500/6757DSC00247-med.JPG
Thanks-Josh