cam help

[jets4me]

This is what I have BBC, 468ci, 10-71 blower, chiller, speed pro L2453F pistons, 291 rect port, closed chamber heads. I need a new cam. I would like to put a solid roller in it. How much lift can I get away with without worrying about valve to piston clearance problems and does anyone have any suggestions. Thanks.

[jets4me]

ttt

[moparjet]

need to go with a 480 lift cam....dont go over 500 lift cuz you will bust my a$$

[jets4me]

buddy i think i will be safe with that cam but not big enough you might take me i will take the winner out of you and jr

[fullthrottle598]

mike you can put up to a 750 lift cam and be safe to run :rollside:

[MACHINEHEAD]

I built one w/2453 w/.585 lift and still had .200 valve to piston @ 0 deck.Run a gentle Crane street roller 250ish @ .050.

[jets4me]

i have cstraub69 custum grinding my cam we are just waiting on the flow numbers no guessing that way