Lake Elsinore on Sunday???

[Mr. Crusader 83]

anyone up for lake smellsomemore this sunday?

[SHIFTY]

I Will Be Down There In A Couple Weeks. How Skanky Is The Water Right Now?

[dmontzsta]

I will be there. Run What You Brung is that day.

[Mr. Crusader 83]

Well Then I Will Run What I Brung!!! Lol
See You There Then... Hopefully My Shitbox Runs

[advantage21]

if its nice maybe i have to do a winter shakedown run.

[blender over]

I will be there. Run What You Brung is that day.
i this on 3/25/06?

[dmontzsta]

i this on 3/25/06?
I am going 3/26/06

[FASTJTBT]

Ill Be There In The Afternoon Taken My Skier Out For Some Rough Stuff?? We Hav A Race There On The 2 Of April.

[TRG]

I will be there on sunday mornin about 8ish ant the east ramp!
Todd

[MBlaster]

Gonna try to make it.

[blender over]

I am going 3/26/06
Cool, me and my buddie with another whacker will be there :)

[CandyA$$]

Cool, me and my buddie with another whacker will be there :)
Are you sure your to run the whacker? :p

[Mr. Crusader 83]

good thing some of you cats are shown. i might need some help.
i have another post going " HELP im going to burn my boat"
the biatch wont run

[RUSSO]

Thinkin Bout Tryin To Make To Out To Work Out The Bugs On The Boat....hopefully.....

[RUSSO]

Also Anyone Know What The Weather Should Be Like This Weekend??or Have A Link??

[455Rocket]

Weather.com (Weather Channel) says:
Low: 41
High: 71
Partly Cloudy.
I suppose it's good enough...
I haven't been there in years though. What launch ramp are you guys using?

[Mr. Crusader 83]

East Ramp

[revndave]

I will try and be there.Just bolted on new injector today. :crossx:
http://www.***boat.com/image_center/data/500/686100_0855.JPG

[TRG]

Lookin good AGAIN there dave! :)

[revndave]

Lookin good AGAIN there dave! :)
Thanks

[Riverat84]

hey anyone have directions to the east ramp coming from the 15 south??? let me know otherwise ill prolly not go...i'd love to though.

[lilrick]

hey anyone have directions to the east ramp coming from the 15 south??? let me know otherwise ill prolly not go...i'd love to though.
I'm not really sure what the east ramp is either. But weather permitting I'll be there!

[revndave]

I think east ramp is the city ramp by the baseball fields.

[blender over]

I think east ramp is the city ramp by the baseball fields.
So dave... your up a running again.......................
wanna piece of my 225hp LOL

[Big Proppa]

I should be there Sunday good weather expected 72
http://weather.msn.com/local.aspx?wealocations=wc:USCA0580

[mouzer]

MOUZER will be there with the cruiser see if i can keep up with BIGPROPPA.

[OneFastOne164]

I too will be there, had a Havasu trip planned but that fell apart, I hope to meet some of you out there....

[Mr. Crusader 83]

hell yeah.... sounds like we might have a good turn out... and i finally got my boat running. so we should be there around 9ish sunday morn. hangover permitted.

[LGCDEVIL]

Where will everybody be on the lake?

[Mr. Crusader 83]

going around in circles!!!! lol
i hangout on the back side of the lake. in the cove

[Riverat84]

going around in circles!!!! lol
i hangout on the back side of the lake. in the cove
if you go do you have to race? or can you just cruise around and kick it?....im thinking of going...

[CandyA$$]

Wow seems like a good event to go to.
Hmmm
I will pass the word on & see what happens.
:p

[Mrs. Bordsmnj]

Y'all might to think about people who are coming out boatless. The cove is not accessable without a boat, is it? We went to our first RWYB boatless.....justa thought..... :rollside:

[Riverat84]

Y'all might to think about people who are coming out boatless. The cove is not accessable without a boat, is it? We went to our first RWYB boatless.....justa thought..... :rollside:
so that means nobody will be bitchin me out if i go on sunday?...
Reid

[Mr. Crusader 83]

i dont race. im a fat guy that likes to drink and check out the hotties.
and besides my boat is ssslllllloooooowwwwwww!!!
and yes you can get to the cove without a boat. drive around the back side of the lake. by the skydiven place. i think there is a way to get down there.

[Riverat84]

i dont race. im a fat guy that likes to drink and check out the hotties.
and besides my boat is ssslllllloooooowwwwwww!!!
and yes you can get to the cove without a boat. drive around the back side of the lake. by the skydiven place. i think there is a way to get down there.
hey crazy fool....whats up man???....what time you launching and where? i dont even know where the fock the various ramps are at that place other than the one on riverside drive on the north end....but that shat costs 15 bones....not into paying that much anymore....hit me up!

[Bense468]

I Would Like To Come Out. Need To Reg The Boat Though.

[lilrick]

I Would Like To Come Out. Need To Reg The Boat Though.
me too! thought I would just chance it though!

[TRG]

I Would Like To Come Out. Need To Reg The Boat Though.
Me three! :rolleyes:

[Dogballs]

Reg Smeg

[lilrick]

I thought I might be able to re-register the boat on-line,but it looks like I need to either go into the DMV or AAA. This sucks because I did not recieve my renewal in the mail!!!!!!

[455Rocket]

[QUOTE=crusader83]i dont race. im a fat guy that likes to drink and check out the hotties.
and besides my boat is ssslllllloooooowwwwwww!!! [QUOTE]
Sounds like a party... I'm glad some REAL boaters will be there too :rollside:
Why race when you can cruise?

[dmontzsta]

I thought I might be able to re-register the boat on-line,but it looks like I need to either go into the DMV or AAA. This sucks because I did not recieve my renewal in the mail!!!!!!
I want to know how you let it get passed due? :D
Isnt it like $10? I always send them in right when I get it.
:)

[455Rocket]

Forgive me if I'm being stupid... I don't frequent Elsinore AT ALL:
The East Ramp is the one off Lakeshore drive, right? lake-elsinore.org says that ramp is closed until further notice... up-dated March 23, 2006
Take a look:
http://www.lake-elsinore.org/communitydir.asp
Can one of you locals clarifiy for me?

[revndave]

East ramp was open today.aka city ramp

[revndave]

Any body going to be giving out any double throw down ass kickins?

[TRG]

Little birdy said you were plannin' on it? :rollside:

[Mr. Crusader 83]

Wud up Reid!!!
Yeah im not payn $15 doll hairs.
BENSE where is the city launch ramp? what street?

[Mr. Crusader 83]

I Would Like To Come Out. Need To Reg The Boat Though.
F### The reg. bring that rocket ship out with some of those myspace cuties in it.... :)

[Mr. Crusader 83]

http://www.lake-elsinore.org/pdf/BoatLaunchFacilitiesv2.pdf
which one is the east ramp???

[Mrs. Bordsmnj]

Any body going to be giving out any double throw down ass kickins?
LOL!!! :rollside:

[Riverat84]

yeah doug left me a voicemail saying they're going to the west ramp off of ortega hwy....i need an address or directions how to get to the west side...someone hook me up!

[MBlaster]

I hope one of the Elsinore locals will clear up the ramp confusion for the confused...like me.

[Mr. Crusader 83]

http://www.campingfriend.com/LakeElsinoreMarinaAndRVResort/default.asp?file=Directions
here you go reid....
if you are comen 15 south, exit central. highway 74. make a right
first light, make another right.
first light go left.
take it down past jack in the box.
launch ramp is on the left.
pm me i will give you my number
sean

[Riverat84]

http://www.campingfriend.com/LakeElsinoreMarinaAndRVResort/default.asp?file=Directions
here you go reid....
if you are comen 15 south, exit central. highway 74. make a right
first light, make another right.
first light go left.
take it down past jack in the box.
launch ramp is on the left.
pm me i will give you my number
sean
see bitches??? now that is the shit i need! sean delivered! rock on mother fathers haha

[revndave]

http://www.campingfriend.com/LakeElsinoreMarinaAndRVResort/default.asp?file=Directions
here you go reid....
if you are comen 15 south, exit central. highway 74. make a right
first light, make another right.
first light go left.
take it down past jack in the box.
launch ramp is on the left.
pm me i will give you my number
sean
If you launch from there aka West Marina have baffles.City ramp at other end of lake is more forgiving about baffles.

[Riverat84]

If you launch from there aka West Marina have baffles.City ramp at other end of lake is more forgiving about baffles.
ive got the gay bassett resonators in mine...is that good enough? or do they need to see the sheet metal stuffed in there like the baffles???
thanx,
Reid

[dmontzsta]

ive got the gay bassett resonators in mine...is that good enough? or do they need to see the sheet metal stuffed in there like the baffles???
thanx,
Reid
Those are good enough, they usually just ask and dont look.

[Riverat84]

Those are good enough, they usually just ask and dont look.
cool cool thanx alot...sounds good enough for me.

[beerjet]

Damn All Of You To Hell ! I have to move this weekend and the ride needs to be dialed in . I would make the old lady move but she's all kinds of knocked up and chit . DAMNIT

[revndave]

Damn All Of You To Hell ! I have to move this weekend and the ride needs to be dialed in . I would make the old lady move but she's all kinds of knocked up and chit . DAMNIT
That suck!!!

[RiverRacer]

If you launch from there aka West Marina have baffles.City ramp at other end of lake is more forgiving about baffles.
Anyone know about the cops? Do they monitor the ramps this early in the year? Are they likely to be out on the Lake? I don't use 'baffles' or 'mufflers'. Just a little steam occasionally. Let me know what you think. RR

[revndave]

Anyone know about the cops? Do they monitor the ramps this early in the year? Are they likely to be out on the Lake? I don't use 'baffles' or 'mufflers'. Just a little steam occasionally. Let me know what you think. RR
I dont think they do. :confused:

[Mr. Crusader 83]

who cares about the cops. lets have some beers and go fast. :)

[Mr. Crusader 83]

:cry: but now i have a problem!!! the two 3in extention fittings out of my holley carb have cracks and are leaking and the only 2 race shops around dont have them. anyone have any? they are blue, 3in long, and the fitting size is a -6 female??? :cry:

[lilrick]

:cry: but now i have a problem!!! the two 3in extention fittings out of my holley carb have cracks and are leaking and the only 2 race shops around dont have them. anyone have any? they are blue, 3in long, and the fitting size is a -6 female??? :cry:
call superdave!!! Superquick!!!!!!!!

[Mr. Crusader 83]

ok but i dont know superdave or superdaves number

[Riverat84]

ok but i dont know superdave or superdaves number
haha.

[Biglue]

The cops still arent patrolling according to Blender Over on the forums. We were just out there about 3 weeks ago. Should be some good times. I'll be there on Sunday. If you see my boat in my sig line make sure you say hello. We can crack open a couple cold ones.

[Mr. Crusader 83]

The cops still arent patrolling according to Blender Over on the forums. We were just out there about 3 weeks ago. Should be some good times. I'll be there on Sunday. If you see my boat in my sig line make sure you say hello. We can crack open a couple cold ones.
HELL YEAH WE WILL CRACK SOME OPEN. I WILL BRING THE HORSE SHOES. LETS HAVE SOME FUN. THEN THE SHIT TALKIN WILL START AND WE CAN RACE.

[revndave]

Just got off some web site temp is 69 for Sunday and the realfeel is 78
http://wwwa.accuweather.com/forecast.asp?partner=accuweather&myadc=0&traveler=1&zipcode=92530&metric=0

[Riverat84]

ill be there, wether i have someone w/ me or not....im sure sean will help me launch the floating engine lol....

[bordsmnj]

cool. got my oil today. hopefully i'll get to it tomorrow.sunday on the water would be bitchen but i don't wanna rush things. got check belts,drive lube,fuel water filter,etc...

[Mr. Crusader 83]

COME ON BOTDSMJN BRING HER OUT....
LETS RUN THIS LAKE WITH ROOSTER THROWN JETS
I WANT TO GET A PIC OF LIKE 10+ JETS BLOWEN BY THE FLOATN PORTA SHITTER WITH ROOST FLYN.... GOOD OL LAKE ESINORE. FLOATN SHITTERS...LOL :) :rollside: :boxed: :shift:

[revndave]

Hopefully I can finish up fuel system today. :idea:

[garret]

We are going to try and make it but I have a lot to do today! Hopefully I will be able to fire my motor and wire the whole thing today oh ya and plumb the whole thing also!!!!!! It will be close but i also dont want to rush it!

[revndave]

We are going to try and make it but I have a lot to do today! Hopefully I will be able to fire my motor and wire the whole thing today oh ya and plumb the whole thing also!!!!!! It will be close but i also dont want to rush it!
That is alot.Will you be at Toms?

[bordsmnj]

COME ON BOTDSMJN BRING HER OUT....
LETS RUN THIS LAKE WITH ROOSTER THROWN JETS
I WANT TO GET A PIC OF LIKE 10+ JETS BLOWEN BY THE FLOATN PORTA SHITTER WITH ROOST FLYN.... GOOD OL LAKE ESINORE. FLOATN SHITTERS...LOL :) :rollside: :boxed: :shift:
alas my rooster tail,it is a small one. i'll snap the photo for you guys, if i go.
haven't done a damned thing today so far :rolleyes:

[revndave]

alas my rooster tail,it is a small one. i'll snap the photo for you guys, if i go.
haven't done a damned thing today so far :rolleyes:
Get to doing

[bordsmnj]

DO it.
DO it.

[revndave]

DOOOOOOOOOO IT :cool:

[Mr. Crusader 83]

quit johnny f&#kin around and DO IT! DO IT!

[mouzer]

Mouzer and mouzer jr will be at marina west, riverside dr before grand,Black yukon w/yellow trailer w/gray primer all over, 21 ft cruiser white/yellow and very very dirty. around 8 30 am

[dmontzsta]

Look for this combo, that is where I will be.
http://www.dmontzsta.com/1991F250/images/100_3659.jpg

[Mr. Crusader 83]

look for mine. im meetn riverrat at jack in the box at 9:30 ish
pic below

[Riverat84]

look for mine. im meetn riverrat at jack in the box at 9:30 ish
pic below
hey FOCKER what about marina west? you wanna launch there after meetin at 930 ish?

[Mr. Crusader 83]

i dont care pimp.
WILL SOMEONE PLEASE CLEAR THIS UP...
http://www.campingfriend.com/LakeEl...file=Directions
IS THIS MARINA WEST?????
if not where is it in from jack in the box?

[455Rocket]

i dont care pimp.
WILL SOMEONE PLEASE CLEAR THIS UP...
http://www.campingfriend.com/LakeEl...file=Directions
IS THIS MARINA WEST?
I second that... is the East Ramp out now or what?

[revndave]

Got boat fired alittle bit ago.Injector sounds good.Needs a bath.Maybe get out there after 10:00am

[beerjet]

Just keep drivin till smell the of the water overwhelms you and you should be there . I mean thats what I do . :D

[Mr. Crusader 83]

well acording to the map. im pretty sure that is as far west as you can go. so..... that is where we be.

[olbiezer]

map quest says it 1823.69 miles...........darn i have a 1823 mile tow limit ........cant make it this year lol

[mouzer]

Jack in the box around 8 ish.......i'll take 2 breakfast jacks / xtra large coke please/ DON !!!!!!!

[Riverat84]

Jack in the box around 8 ish.......i'll take 2 breakfast jacks / xtra large coke please/ DON !!!!!!!
ouch! focked up!

[Ntwotrance]

Damn 2 different posts for the same damn thing...we'll be there around....8:30 or so, heading straight back to the cove from there. Sounds like it's going to be a great turn out for RWYB this year. :)

[Ntwotrance]

Look for this combo, that is where I will be.
http://www.dmontzsta.com/1991F250/images/100_3659.jpg
we gotta get that cruizer of yours running before CBBB

[dmontzsta]

we gotta get that cruizer of yours running before CBBB
No rush, I am not going to be rushed.
:)
I want every piece polished, the floors new, the set up JUST right. This baby needs to run 110 mph with 650hp, or I am going to be pissed. :crossx:

[÷קmᮆښ×÷]

No rush, I am not going to be rushed.
:)
I want every piece polished, the floors new, the set up JUST right. This baby needs to run 110 mph with 650hp, or I am going to be pissed. :crossx:
hahaha maybe if you decide to put an chevy in it or run some alky..
call me i got something for your pile of parts......

[dmontzsta]

hahaha maybe if you decide to put an chevy in it or run some alky..
call me i got something for your pile of parts......
you know how I feel about chevys, you heading to Elsinore tomorrow? head out, we got some room in the cruiser for you!

[TRG]

Well today was a blast!...felt good to finaly get the boat wet, thanks everyone for a good time lotta nice boats and people too!
Hope big proppa got his trailer tire fixed!
My kid brother lost the coupler in his drive today (25 daytona) had to be towed all the way across the lake to west marina he's in good spirits though! and my buddy John (yellow/blue schiada) ended up having a blowout on the 15 fwy as we were leaving the lake! good day,...rough ending!
Now for the turkey!
Todd
:rollside:

[Ntwotrance]

was a good time today, quite a few people there. Some though, didn't show (not to mention names......chub)....seemed like everyone was having a problem or two today, but hopefully all the kinks are worked out. great seeing everyone again!

[dmontzsta]

It was good to get out on the water and see everyone.
til we meet again... :)

[revndave]

Had fun today.Got to meet up with the A hole at the lauch ramp that was in the cove calling us A holes for doing runs in the cove.Dude was a A hole and his 14 year old son was a bitch also.Anyway nice to see everybody.It was a blast.

[dmontzsta]

Had fun today.Got to meet up with the A hole at the lauch ramp that was in the cove calling us A holes for doing runs in the cove.Dude was a A hole and his 14 year old son was a bitch also.Anyway nice to see everybody.It was a blast.
Tell us more!!! :D

[TRG]

Azzholes! did'nt you know it was a 5mph zone dave! :rollside:
I for one dont do that kinda shtuff anymore!
Did you threten the punish him in front of his kid??? inquiring minds wanna know???

[V-DRIVE VIDEO]

It was good to get out on the water and see everyone.
til we meet again... :)
So D,,,,did you pop your jet boat cherry and get a ride in a quick one?

[dmontzsta]

So D,,,,did you pop your jet boat cherry and get a ride in a quick one?
No, and they call V-Drives trailer queens!
I was out driving the cruiser most of the time, I have to drive, I get restless hanging on the beach.
The only fast ones out there were revndave and Todd. I was really hoping to see CS and feel the force of his boat.

[MBlaster]

Good day fellas. No major problems. I could use some new batterys and at the end of the day the throttle return spring liked to stick at 1800 revs instead of a nice idle. All in all we had lots of fun and good to meet you guys.(We were the people in the blue Carrera.) I'll put some pics up tomorrow...need to d-load the cam.

[TRG]

Did you guy happen to catch those two cracker box guys???
they did not lift as they used two of the high speed zone bouys as turn pins! lol I wanna say they ran 5/10 laps around them,...came in for changes /fuel and back at it hitting it hard, some real sick shit!...very impressive, i want to say that one of the boats was called "crackerJack" and i did not get a chance to see the other boat as they guy was retrieving it! Can you say "Turbulance"?
Todd

[Mr. Crusader 83]

it was great to meet all you guys. we had a great time. we will defently have to do this again. thanks for all your guys help lastweek fixn my boat so i could make it out. todd and dave you guys have some amazing boats. cool to see them in person.
ANYONE TAKE ANY PICS???

[dmontzsta]

Did you guy happen to catch those two cracker box guys???
they did not lift as they used two of the high speed zone bouys as turn pins! lol I wanna say they ran 5/10 laps around them,...came in for changes /fuel and back at it hitting it hard, some real sick shit!...very impressive, i want to say that one of the boats was called "crackerJack" and i did not get a chance to see the other boat as they guy was retrieving it! Can you say "Turbulance"?
Todd
I did not see them, but I saw some ski race boats. That crackerjack boat runs like a monster. He seems to be at every outing and then races it, it is like the energizer bunny of boats...This is from the last Ming race.
http://www.dmontzsta.com/BakoMarch06/100_4764.jpg
I think he ran with the crackers and then with Nostalgia Endurance as well.
It was pretty damn rough down the middle of Elsinore, I was flying the cruiser out of the water, so those crackers must of had wings. :)

[MBlaster]

These were taken early, beers considered part of brunch :)
, more boats showed up a little later.

[Mr. Crusader 83]

dmontzsta, did you take some pics?

[RCB19]

Sounds like you all had a killer day. Looks a bit warmer than it was when we hit it up in December.
http://www.***boat.net/forums/attachment.php?attachmentid=12456
http://www.***boat.net/forums/attachment.php?attachmentid=12457

[Big Proppa]

Very nice day - felt great to be out on the water again - we should do it again soon.

[Mr. Crusader 83]

Very nice day - felt great to be out on the water again - we should do it again soon.
lets do it!!! how about april 9th??? sunday.

[Mrs. Bordsmnj]

Sounds like you all had a killer day. Looks a bit warmer than it was when we hit it up in December.
http://www.***boat.net/forums/attachment.php?attachmentid=12456
http://www.***boat.net/forums/attachment.php?attachmentid=12457
Looks like quite the sausage-fest! :D

[Riverat84]

DAMN! look at what i missed? well turns out a nice 2" focking rock got stuck between two of the impeller blades way the HELL up in there!....i tried to get the grate off but those stupid ass old brass phillips screws wouldnt budge....instead i kinda stripped them....im down for april 9th, but im not sure anyone wants me there after what happened w/ my boat...fock i was pissed!....i was so mad, i just went home. i'd like to thank doug and his buddy in his boat for helping me out w/ my boat landing and launching it again n stuff. that was real cool....sounds like its a great bunch of guys in this JUST JETS forum. thanx sean(crusader83) for helpin out also.....fockin bullshit....that was the first time i ever had a serious problem w/ my sled, but yeah ill get that damn rock out before april 9th.
wish i could've made it to the cove.
Reid.

[Riverat84]

hey sean, how'd the girlie like it yesterday???

[dmontzsta]

DAMN! look at what i missed? well turns out a nice 2" focking rock got stuck between two of the impeller blades way the HELL up in there!....i tried to get the grate off but those stupid ass old brass phillips screws wouldnt budge....instead i kinda stripped them....im down for april 9th, but im not sure anyone wants me there after what happened w/ my boat...fock i was pissed!....i was so mad, i just went home. i'd like to thank doug and his buddy in his boat for helping me out w/ my boat landing and launching it again n stuff. that was real cool....sounds like its a great bunch of guys in this JUST JETS forum. thanx sean(crusader83) for helpin out also.....fockin bullshit....that was the first time i ever had a serious problem w/ my sled, but yeah ill get that damn rock out before april 9th.
wish i could've made it to the cove.
Reid.
Glad you found the problem, that is why jets cannot go in shallow water either. :D BTW: The other guy was my Dad (ShadetreeDon), so there are some great guys in the V-DRIVE forum also. :)

[Riverat84]

Glad you found the problem, that is why jets cannot go in shallow water either. :D BTW: The other guy was my Dad (ShadetreeDon), so there are some great guys in the V-DRIVE forum also. :)
oh hell yeah, tell him thanx for sharing the burns on himself also from my pipe haha....i could've idled all the way there but that would've taken about 2 hours lol.....it was nice being there, but i'll definately be there next time....any ideas on how to torque 4 semi-stripped focking brass screwes out of the loader grate so i could reach my hand up in there and pry the rock out? doesnt look like the impeller is chipped up too bad or anything, so right now im now worrying about it.....thanx for all of your help!

[dmontzsta]

oh hell yeah, tell him thanx for sharing the burns on himself also from my pipe haha....i could've idled all the way there but that would've taken about 2 hours lol.....it was nice being there, but i'll definately be there next time....any ideas on how to torque 4 semi-stripped focking brass screwes out of the loader grate so i could reach my hand up in there and pry the rock out? doesnt look like the impeller is chipped up too bad or anything, so right now im now worrying about it.....thanx for all of your help!
I will pass it along, if he doesnt see this. Your boat is clean and you gotta love the Big Ford. Do you think it happened by starting it so close to shore? My Dad loves header burns, you use to have some pretty bad ones on his head, from my old boat. He burnt his leg on Doug's boat yesterday too. :)

[Mr. Crusader 83]

hey sean, how'd the girlie like it yesterday???
she had a blast... first time on the water. now she wants to go every weekend. lol fine by me... :) get that rig running and lets hit it again on april 9th.
anyone else down???

[Mr. Crusader 83]

Looks like quite the sausage-fest! :D
it usually is. thats why you have to bring your own chick. B.Y.O.P. !!!

[SHIFTY]

NOBODY GOT ANY PICS UNDER WAY? :cool:

[Mr. Crusader 83]

NOBODY GOT ANY PICS UNDER WAY? :cool:
dmontzsta and shadetreedon got some. they said they will post them later

[Ntwotrance]

DAMN! look at what i missed? well turns out a nice 2" focking rock got stuck between two of the impeller blades way the HELL up in there!....i tried to get the grate off but those stupid ass old brass phillips screws wouldnt budge....instead i kinda stripped them....im down for april 9th, but im not sure anyone wants me there after what happened w/ my boat...fock i was pissed!....i was so mad, i just went home. i'd like to thank doug and his buddy in his boat for helping me out w/ my boat landing and launching it again n stuff. that was real cool....sounds like its a great bunch of guys in this JUST JETS forum. thanx sean(crusader83) for helpin out also.....fockin bullshit....that was the first time i ever had a serious problem w/ my sled, but yeah ill get that damn rock out before april 9th.
wish i could've made it to the cove.
Reid.
Bring it by if ya can't get it

[Mrs. Bordsmnj]

it usually is. thats why you have to bring your own chick. B.Y.O.P. !!!
LOL, my husband went but I stayed home. :rollside:

[dmontzsta]

My woman and son stayed home too, she was saying something about how nasty the water was. :)

[Mr. Crusader 83]

to tell you the truth, its water and you can drive a boat on it. i dont care. and the water looked good. alot better then last year

[Mr. Crusader 83]

LOL, my husband went but I stayed home. :rollside:
yeah. i met your hubby. very nice guy! you guys have a very nice boat.

[Riverat84]

to tell you the truth, its water and you can drive a boat on it. i dont care. and the water looked good. alot better then last year
haha! seriously.

[Riverat84]

i should've mobbed out w/ you guys anyways....not like i could've done anything anyway right? eh...

[dmontzsta]

to tell you the truth, its water and you can drive a boat on it. i dont care. and the water looked good. alot better then last year
I agree, but you know how women are. Shit, everyone on the boards were calling Lake Elsinore "Lake dmontzsta" last year, cause I was on it every single weekend! lol
:)
I still take shit for it, while most people went to the river a few times a month, I would go to the river once and Elsinore all the other times. Its close and cheaper than going to the river.

[Riverat84]

I will pass it along, if he doesnt see this. Your boat is clean and you gotta love the Big Ford. Do you think it happened by starting it so close to shore? My Dad loves header burns, you use to have some pretty bad ones on his head, from my old boat. He burnt his leg on Doug's boat yesterday too. :)
well the thing is, the boat started to take on water cuz i left the focking hose adapter in instead of the plug....which im glad i had it sitting on the other side of the stringer so i could wrench it in while the bilge pump was blowin lol...i dont think i bottomed out at the ramp but i DID start it in like 2 feet of water....i dont know why i did, and i usually think about it but not this time, lol.....i checked every inch of the bottom, and no loss of gel, it still looks beautiful, so right on, thanx for the help tho guys, no worries, ill get this bitch out of the impeller somehow, sometime, i dont know wtf im gonna do, haha.

[Riverat84]

I agree, but you know how women are. Shit, everyone on the boards were calling Lake Elsinore "Lake dmontzsta" last year, cause I was on it every single weekend! lol
:)
I still take shit for it, while most people went to the river a few times a month, I would go to the river once and Elsinore all the other times. Its close and cheaper than going to the river.
yeah i agree, but the river is so prettier to be at....smellsomemore is VERY convienent though!

[Mrs. Bordsmnj]

yeah. i met your hubby. very nice guy! you guys have a very nice boat.
Thank you but our boat was not there. My husband was on Revndave's boat. :rollside: :boxed:

[SHIFTY]

Is The Water All Skanky Still?

[Mr. Crusader 83]

Thank you but our boat was not there. My husband was on Revndave's boat. :rollside: :boxed:
he was telln me about it

[Mrs. Bordsmnj]

he was telln me about it
Oh, I gotcha now! Thanks again! LOL :rollside:

[Riverat84]

he was telln me about it
well hey im glad she had a good time, i was missin it :cry:
i cant wait to pry that bitch out of there.

[Mr. Crusader 83]

what are you waitin for? it to walk out of there itself. i would have sat on that ramp until that f#cker came out. instead of going home. but what ever. we will have to meet up again on april 9th. my buddy shell is going to bring his 19ft daytona

[Riverat84]

what are you waitin for? it to walk out of there itself. i would have sat on that ramp until that f#cker came out. instead of going home. but what ever. we will have to meet up again on april 9th. my buddy shell is going to bring his 19ft daytona
i had nothing to get the guard grate off.....the screws are stripped, and they're in there tight also man....i tried everything i could, and i dont have anything long enough to get that far to pry it out of the impeller, its a good 13-14 inches up in there, plus the brass guard over the intake.....

[Ntwotrance]

i had nothing to get the guard grate off.....the screws are stripped, and they're in there tight also man....i tried everything i could, and i dont have anything long enough to get that far to pry it out of the impeller, its a good 13-14 inches up in there, plus the brass guard over the intake.....
bring it by this weekend

[Riverat84]

bring it by this weekend
you sure man? i dont want you to try to get those goddamn screws off....we might have to drill through them...thats the thing. they're brass and soft....i can probably do it sunday what do you think?

[Ntwotrance]

you sure man? i dont want you to try to get those goddamn screws off....we might have to drill through them...thats the thing. they're brass and soft....i can probably do it sunday what do you think?
tis not a problem, give me a yell and i'll give you the directions

[Mr. Crusader 83]

you sure man? i dont want you to try to get those goddamn screws off....we might have to drill through them...thats the thing. they're brass and soft....i can probably do it sunday what do you think?
hit me up. i will cruz up and give you a hand

[dmontzsta]

Doug, the new signature is hillarious.

[bradbigsley]

Had fun today.Got to meet up with the A hole at the lauch ramp that was in the cove calling us A holes for doing runs in the cove.Dude was a A hole and his 14 year old son was a bitch also.Anyway nice to see everybody.It was a blast.
hey dave, thats what you get for being the "**ck sucker". we saw him up there as well but you must have taken care of it cause he diddnt say anything to us a-holes...lol.. had a blast and it was great meeting all of yuz

[bordsmnj]

Doug, the new signature is hillarious.
that thing is killin' me,lol.
yeah yesterday was bitchen . bitchen boats and bitchen peeps. except for that one guy in the reinell. did he spaz out at the luanch ramp with anyone else?
might be in to going april 9th unless we're in the dessert gettin' dirty one last time.
lets see some more pics!

[455Rocket]

Here's a few pics from this weekend...
What an "asshole" this guy is... no respect for the buoys!
http://www.hotboatpics.com/pics/data/500/5398PICT0200-med.JPG
http://www.hotboatpics.com/pics/data/500/5398PICT0196-med.JPG
http://www.hotboatpics.com/pics/data/500/5398PICT0198-med.JPG
http://www.hotboatpics.com/pics/data/500/5398PICT0211-med.JPG
http://www.hotboatpics.com/pics/data/500/5398PICT0213-med.JPG
http://www.hotboatpics.com/pics/data/500/5398PICT0214-med.JPG
http://www.hotboatpics.com/pics/data/500/5398PICT0215-med.JPG

[455Rocket]

Looks like quite the sausage-fest! :D
I counted 4 women (Five if you count by dog)...
http://www.hotboatpics.com/pics/data/500/5398PICT0210-med.JPG
http://www.hotboatpics.com/pics/data/500/5398PICT0208-med.JPG
(Congrats MBlaster on the new ride... I'm glad you let Mrs. MBlaster drive for a while :rollside: )

[Mr. Crusader 83]

yeah you always have to bring 1 with you 455rocket. 2 and a dog works too tho...lol
next time, now that the boat runs again, i will bring more.
april 9th???
big proppa, riverrat, and i are down. anyone else???

[revndave]

Great pics.I like the asshole pic the best. :D :D

[LGCDEVIL]

Asshole here. Had a good time.

[Biglue]

Good meeting couple of you guys. Had a great time. We'll have to do it again.
BTW, I think Elsinore needs to add some no wake markers in that cove. :D

[QuickCheetah]

hows it going everyone?...im new to the boards, well hell new to the whole jet boating world also...had a friend get me into it...im trying to talk my girlfriend into going on the 9th of April.

[Riverat84]

hows it going everyone?...im new to the boards, well hell new to the whole jet boating world also...had a friend get me into it...im trying to talk my girlfriend into going on the 9th of April.
shat you should! we're trying to get some more ppl to go....northwest ramp off of riverside drive.

[Ntwotrance]

Doug, the new signature is hillarious.
had to add it, it killed me

[QuickCheetah]

just a few pics of the Cheetah..its a 73 455 Olds...need to know what else i can do for more power besides putting a Chevy in it...besides im a Pontiac guy...having the Olds motor on it is killing me...

[bordsmnj]

http://www.***boat.net/forums/attachment.php?attachmentid=12540
http://www.***boat.net/forums/attachment.php?attachmentid=12541
http://www.***boat.net/forums/attachment.php?attachmentid=12542
welcome to ***boat.

[Mr. Crusader 83]

well you could start with putting a chevy in it... but mine is slow with a chevy...lol
you should come out. april 9th, dont be scurd!!! lol

[QuickCheetah]

Well im having a problem...it runs for a few seconds and shuts off...im gona start with the easy thing first check the fuel system...and gotta get extentions for the carb...

[Mr. Crusader 83]

i had the same problem with my boat.
the carb was all gumd up and the fuel pump was shot. check your fuel psi.
look for thread
HELP!!! Im going to burn my boat.

[Mr. Crusader 83]

http://www.***boat.com/image_center/data/520/2854000_0094.jpg
http://www.***boat.com/image_center/data/520/2854000_0095.jpg

[QuickCheetah]

took off the fuel pump and there was all kinds of rust colored crap along with some black stuff in it...so cleaned it up and gonna drain the tanks next...wish me luck..lol :220v:

[GunninGopher]

took off the fuel pump and there was all kinds of rust colored crap along with some black stuff in it...so cleaned it up and gonna drain the tanks next...wish me luck..lol :220v:
I had the same problem and rebuilt the carb. I wish I had drained the tanks. I went to El Cap last sunday. It was running good then I switched to the right tank and it died. I'm gonna drain it and put a water separator in. I hope that is it.

[QuickCheetah]

Anyone know where i can find a steering cable?

[Mr. Crusader 83]

Rexmar.com

[revndave]

Anyone know where i can find a steering cable?
Tom Papp Racing 951-734-4606.Located in Corona

[QuickCheetah]

here goes...i started draining my tanks...found out that there is no drain and i have to pump it using the fule pump. also took the regulator off and found it to be full of crap too...maybe it would be easier to take the tanks off and drain them that way...then i could put some kinda solvent in them to clean the out good...and also maybe i should replace all the fule lines...HELP!!!! wanna have this damn thing ready for the 9th

[beerjet]

here goes...i started draining my tanks...found out that there is no drain and i have to pump it using the fule pump. also took the regulator off and found it to be full of crap too...maybe it would be easier to take the tanks off and drain them that way...then i could put some kinda solvent in them to clean the out good...and also maybe i should replace all the fule lines...HELP!!!! wanna have this damn thing ready for the 9th
Your on a good one . Mine dont have a drain either so I had to remove them and turn them upside down . Just tear it all out now and clean it up good so it's one less thing you have to worry about later.
-beerjet-

[QuickCheetah]

well i went to take the tanks out and the bolts that they are bolted down with are just turning...is there a solvent or something that i can buy and put down in there to clean the tanks while draining them

[Mr. Crusader 83]

heres what i did.
i took the feed line off (the one from the tank to the t valve) put a new hose on the tank, that was longer and ran it into a 5 gallon gas can. then i took my air compressor and put the blow tip in the gas filler, with a towel wrapped around the blow tip so that the tanks would build up psi. then the fuel ran right out. took a lil while. but it worked, make sure you jack the front of the boat up so all the fuel runs to the back. i was able to get almost all of the fuel out. then i put my wet/dry shop cav in the gas filler and sucked out all the sh*t in the bottom of the tanks.
and its good so far
just my .02

[beerjet]

heres what i did.
i took the feed line off (the one from the tank to the t valve) put a new hose on the tank, that was longer and ran it into a 5 gallon gas can. then i took my air compressor and put the blow tip in the gas filler, with a towel wrapped around the blow tip so that the tanks would build up psi. then the fuel ran right out. took a lil while. but it worked, make sure you jack the front of the boat up so all the fuel runs to the back. i was able to get almost all of the fuel out. then i put my wet/dry shop cav in the gas filler and sucked out all the sh*t in the bottom of the tanks.
and its good so far
just my .02
Awww come on man . Your doin it the easy way . :D I put my face in the filler hole and BLOW AND HOLD IT .

[QuickCheetah]

wanted to thank everyone or all the help on the fuel tanks...finally got them drained yesterday...didnt have to take them out after all....but now i have to find something to clean them with....i was think that CLR stuff...anyone have any feedback on that?...also...weather permitting are we still on for the 9th? girlfriend is looking forward to going and it will be her and the kids first jet boat outting...

[Mr. Crusader 83]

my chick and i will be there. and im pretty sure riverrat is still going. big proppa said he was up for it.

[Mr. Crusader 83]

Awww come on man . Your doin it the easy way . :D I put my face in the filler hole and BLOW AND HOLD IT .
yeah. i tried it your way. and i tried sucking it out of the filler into a gas can. but after two mouth fulls of gas i gave up. then after a few more beers. i used the air comp. :)

[QuickCheetah]

ok got the new steering cable on...now to make it work...had to take the seats all the way out to get the old one out..hopefully it will be ready for sunday...and its not raining...any suggestions for a solvent to clean out the tanks...Mario

[Mr. Crusader 83]

i have personally never used anything to clean a gas tank out.
post a new tread and ask. you will probly get better results.

[QuickCheetah]

Anyone know what the weather is supposed to be like this Sunday?

[beerjet]

I Was Just Told . Fri. -rain . Sat-rain. Sun-rain. I Really Hope I'm Wrong.
-beerjet-

[Mr. Crusader 83]

i started another post for this sunday. weather.com said 70. and 20% chance of rain

[beerjet]

Well if it isn't raining I will be there and I sure hope some body knows there (or mine rather) carburaters. We will see what transpires.
-beerjet-

[Mr. Crusader 83]

why? what you got going on with your carb???

[beerjet]

why? what you got going on with your carb???
Well I got it to run and idle but when I fired it up in the garage with the door open of coarse, My eyes were burning like crazy so the idle screws are goin to need some work and we'll see what else.
-beerjet-

[Mr. Crusader 83]

easy bro.... no problem

[beerjet]

I'm lucky I got the thing to run . :hammer2: