Jetmugg
11-15-2003, 05:38 PM
All right guys, you've heard it before, but this time it's for real. My Earl Smith (Performance Jet Boat) 18' Gullwing needs to go. Here's a list of what I've got:
18' PJB Gullwing Hull (pics below)
has full stringers, seems to be a fairly light layup, steering wheel, rack, guages and "Oh Shxt" handle installed.
Tandem trailer (new tires & wheels) w/ removable tongue
dual SS Russell saddle tanks
Fresh 12JG pump with Jetaway, Al impeller, and ultimate wear ring by HTP (Duane Oblander). Pump has never been wet and Jetaway hasn't been used since rebuild by Duane
Short aggressor droop
manual place diverter with brand new floor handle and cable
Two rideplates (1 by Duane, 1 by Jack)
Two shoes (1 by Duane, 1 by Jack)
Ramp loader
stock rock grate
2 transom adapters
2 extra JG nozzles & adapters
2 racing style fiberglass buckets (no upholstery)
454 Chevy Big Block (machined but not assembled)
bored 0.030" over (fresh, not yet assembled) with cam bearings installed
fresh cast crank ground 10/10 (never installed)
brand new Speed Pro Hypereutectic pistons & rings (never installed)
all new bearings & gasket set (Clevite and FelPro)
Fresh 781 oval heads with new valves (2.19/1.8, springs, guides, retainers & locks (over 1K in heads alone). Never run. Poly Locks (never installed)
Complete Stage 3 cam, lifter, spring set by HTP.
Oval Port TR with 2 600 vac sec holleys
Dooley style scoop with vinyl cover
12 quart jet boat (I think it's a Milodon) oil pan
4-point mounts and rail kit
brand new SFI approved flexplate and harmonic damper
ARP main studs and rod bolts
3/8 BBC rods freshly sized and installed on pistons above
brand new (never installed) PTO adapter flange
driveline with u-joints
2 foot throttles with cables
3 sets of exhaust (logs w/risers, OT Bassets, and Thru-transom Bassets with thru-transom tips)
extra set of guages
will throw in poxy-putty to set back pump
I'm sure there's more, but I can't think of it all right now.
$4K takes it all, guys and gals.
Will separate if necessary. $1500 for hull and trailer
$1500 for pump and accessories
$1750 for engine and accessories.
Put it all together and probably run in the mid-80's.
Steve M.
18' PJB Gullwing Hull (pics below)
has full stringers, seems to be a fairly light layup, steering wheel, rack, guages and "Oh Shxt" handle installed.
Tandem trailer (new tires & wheels) w/ removable tongue
dual SS Russell saddle tanks
Fresh 12JG pump with Jetaway, Al impeller, and ultimate wear ring by HTP (Duane Oblander). Pump has never been wet and Jetaway hasn't been used since rebuild by Duane
Short aggressor droop
manual place diverter with brand new floor handle and cable
Two rideplates (1 by Duane, 1 by Jack)
Two shoes (1 by Duane, 1 by Jack)
Ramp loader
stock rock grate
2 transom adapters
2 extra JG nozzles & adapters
2 racing style fiberglass buckets (no upholstery)
454 Chevy Big Block (machined but not assembled)
bored 0.030" over (fresh, not yet assembled) with cam bearings installed
fresh cast crank ground 10/10 (never installed)
brand new Speed Pro Hypereutectic pistons & rings (never installed)
all new bearings & gasket set (Clevite and FelPro)
Fresh 781 oval heads with new valves (2.19/1.8, springs, guides, retainers & locks (over 1K in heads alone). Never run. Poly Locks (never installed)
Complete Stage 3 cam, lifter, spring set by HTP.
Oval Port TR with 2 600 vac sec holleys
Dooley style scoop with vinyl cover
12 quart jet boat (I think it's a Milodon) oil pan
4-point mounts and rail kit
brand new SFI approved flexplate and harmonic damper
ARP main studs and rod bolts
3/8 BBC rods freshly sized and installed on pistons above
brand new (never installed) PTO adapter flange
driveline with u-joints
2 foot throttles with cables
3 sets of exhaust (logs w/risers, OT Bassets, and Thru-transom Bassets with thru-transom tips)
extra set of guages
will throw in poxy-putty to set back pump
I'm sure there's more, but I can't think of it all right now.
$4K takes it all, guys and gals.
Will separate if necessary. $1500 for hull and trailer
$1500 for pump and accessories
$1750 for engine and accessories.
Put it all together and probably run in the mid-80's.
Steve M.