PDA

View Full Version : Red/Green navigation night



Chris J
12-31-2003, 08:21 AM
Does anyone know were I can get a classic or decent looking Red/Green light for the bow of my JET BOAT? Seems like the only ones available are the oversized round plastic ones (Kinda like putting a hood orniment on a Stingray Vette). The boat I'm restoring never had one and I need one per state law.
Tried Rex website but their links to the light pages don't work.
Thanks

058
12-31-2003, 09:52 AM
Check his catalog.:D

HalletDave
12-31-2003, 10:11 AM
Check his catalog.
LMAO :D

quiet riot
12-31-2003, 10:19 AM
These seperate ones (one green, one red) on the top sides of my bow are made by perko but not sure if you have a place to mount them like mine. They're the little black dots on the bow on each side. http://www.***boat.com/image_center/data/500/1036boat4.jpg Most places like west marine, etc carry perko stuff and a few others.
jd

Rexone
12-31-2003, 10:39 AM
Chris go to Perko's website (http://www.perko.com) and go to their catalog section and search for lights. If we don't have the one you want in stock they take a day or two to get. They probably make what you're looking for.
:)

THE BOSTON SIDEWINDER
12-31-2003, 12:07 PM
WHAT EVER LOOK YOU LIKE GO AQUA SIGNAL! THIS BRAND IS TOUGH AND WILL LAST, UN LIKE SOME OF THE OTHERS WE'VE STOCKED HERE AT THE MARINA...BILL.

Squirtcha?
12-31-2003, 12:17 PM
like putting a hood orniment on a Stingray Vette
There's always this route too. I don't care for the lights that stick up on the deck either, so opted for the flushmounts stainless steel lights.
http://www.homestead.com/jetboat/files/Img_0333e.JPG

cruser
01-02-2004, 12:41 AM
Saw some cool LED ones on an Eliminator. Kinda expensive though. I think about $95. Don't know who made them but you can get them from Eliminator.
cruzer.

THE BOSTON SIDEWINDER
01-02-2004, 06:38 AM
KELLOGG MARINE SUPPLY(OLD LYME , CT) HAS THE FLUSH MOUNT KIND...BILL.

spectratoad
01-02-2004, 07:59 AM
I bought one last season that is suction cup mounted, battery powered. I have my permanent mounted but I am thinking of pulling it out to get rid of some of the metal and smooth the hull a little.
THe suction cup worked great and you can take it off.

TRG
01-02-2004, 03:20 PM
im definitly going the suction rout for this summer...i got caught out a couple of times last when they would have come in handy!!

dawgdude
01-02-2004, 03:28 PM
Squirtcha,,did your bow lights come on your boat or did you pick them up later. My Kona is set up for those, (holes cut in bow), but the lights weren't with the boat and I can't find em anywhere.