Diamond plate

[1stepcloser]

Anyone have an idea on where to get diamond plate? I need a couple of rectangle pieces, and also a little something fabbed as well.
I should add that I would prefer somewhere local to the Great 909....

[CAPTROBBY]

TRY YOUR LOCAL STEEL SUPPLY HOUSE. I BOUGHT A 4X8 SHEET AWILE BACK FROM PATTON STEEL IN LANCASTER. DEPENDING ON THICKNESS IT STARTS AROUND $100 PER SHEET. MOST PLACES WILL SELL SMALL CUT PIECES IF THATS ALL YOU NEED.

[Budget Baller]

Call Industrial Pipe & Steel - (818) 443-9467

[superdave013]

Schoor metal in Anaheim. It's right on Kramer. They have a shit load of polished alum and some s.s. in the scrap section.

[OMEGA_BUBBLE_JET]

I thought diamond plate was a Texas thing:confused: next you guys will be using astro turf....:D :cool:
Omega

[Dr. Eagle]

Originally posted by OMEGA_BUBBLE_JET
I thought diamond plate was a Texas thing:confused: next you guys will be using astro turf....:D :cool:
Omega
And lots more Duct tape.......:D

[OMEGA_BUBBLE_JET]

you know you can make a tow rope out of duct tape......seen it done. surprised the shit out of me.
Omega (from the land of southern engineering)

[Dr. Eagle]

Originally posted by OMEGA_BUBBLE_JET
you know you can make a tow rope out of duct tape......seen it done. surprised the shit out of me.
Omega (from the land of southern engineering)
shhhhrrrat shhhhrrrat, shhhgrate shhhgrate!! Mazin stuff!!!:D

[jbtrailerjim]

Fabco Steel in Fontana. (909)350-1535
Adress: 14688 San Bernardino Ave.
I buy a lot of steel from them and they do a lot of fabricating for me.

[truksnboats]

Place called Pattons has all types of metal. I know there is on in Irwindale and I think there is one in Ontario.

[BADBLOWN572]

I got all of my diamond plate at Joor Brothers in Corona. Good prices and they would shear it in whatever formation I wanted free of charge.

[wsuwrhr]

Dude, come on.
Pattons on Mission Blvd in Ontario. 988-6461. Talk to Jean in sales. I have seen rems.
Brian

[ryantparks]

I was at Sears and saw a new refrigerater that had diamond plate on it and I was thinking of doing it to mine in the garage so now I too know where to get it. Thanks

[Bow Tie Omega]

Your local metal supply shop or recycling shop should have what you need. If you are in Temecula, you can hit Rancho Metals and Recycling Center on Jefferson next to Temecula Motorsports.

[v-drive]

And in Irvine you have Industrial metal supply. I spend alot of time there and they have an extensive remnant dept. Bowtie omega do you need anything as I'm picking up a piece for your dash tomorrow..... :cool: v-drive

[hack job]

Originally posted by superdave013
Schoor metal in Anaheim. It's right on Kramer. They have a shit load of polished alum and some s.s. in the scrap section.
iam with this. they are the place and they always have it in the rem. section cheep.;)

[Bow Tie Omega]

Yeah man, look at matching material for the vents, let me know how much.....Thanks..Joe

[THATJEFFGUY]

I got my diamond plate for the trailer at K&H Metals in Riverside on Main St.

[LASERRAY]

Originally posted by OMEGA_BUBBLE_JET
you know you can make a tow rope out of duct tape......seen it done. surprised the shit out of me.
Omega (from the land of southern engineering) I saw a boat being towed by a 20' length of Nashua 357 duct tape. Granted, it was a Bayliner. :D

[victorfb]

can you make diamond plate from duct tape?
how about putting the mayo in with the tuna before you can it? better yet, feed the tuna the mayo.
CALL STARKIST !!!:p

[LASERRAY]

You can tune a piano, but you can't tune a fish. Go figure:D