Pump part

[Taylorman]

Anyone know where I can get one of these brackets that the tunbuckels attach to for ride plate adjustment. See picture below.
http://www.***boat.com/image_center/data/500/161scan-med.jpg

[flat broke]

Rex marine. Look under cavitation plate hardware.
Chris

[Taylorman]

I don't mean the turnbuckles themselves. Im looking for the bracket that bolts to the bowl and droop snoot that the turnbuckles mount to.

[Duane HTP]

You make those out of 1/4" aluminum.

[King Kuracz]

I think he was looking to buy one, as not all of us have the equipment to machine something like that ourselves. :cry:

[spectras only]

One pair left , polished aluminum = $ 98 cdn at california marine . ph ; 604-278 1880 . e-mail; sales@californiamarine.comhttp://www3.telus.net/spectrasonly/photo15.jpghttp://www3.telus.net/spectrasonly/photo14.jpg

[ChetCapoli]

[QUOTE]Originally posted by spectras only
One pair left , polished aluminum = $ 98 cdn at california [/
QUOTE]
You actually get $98 for those?? OUCH!! Crazy if you ask me. Take you an hour to make them out of aluminum for less than $20 tops.
CHET

[spectras only]

Chet , if I need one ,would make it myself;) :p .Those are the LAST ones [ antiques are more expensive than new ones ,hehe]Dave had since the 70's:p .Now they're mass produced and cheaper from rex or others:cool:

[Squirtcha?]

Find a machine shop and show them what it is you want done. It'd be a piece of cake with the proper equipment. That's their job and what they're in business for. Just don't tell em somebody wanted $100 for one and I bet you could have one made up for $20 or so. I like the one piece design better than the two. Looks like it'd be stronger and it looks better too.

[jweeks123]

don't know what machine shops hourly rate is in arizona, but in calif they get $60, $80, or more per hour. and you have to kiss their butt to get a job done. those are 5 buck parts for someone who is mass producing them, but way more if you just walk in off the street and ask for two. i'd bet $60 at least.
jw

[wsuwrhr]

Originally posted by jweeks123
don't know what machine shops hourly rate is in arizona, but in calif they get $60, $80, or more per hour. and you have to kiss their butt to get a job done. those are 5 buck parts for someone who is mass producing them, but way more if you just walk in off the street and ask for two. i'd bet $60 at least.
jw
I appreciate your estimates, but I disagree about getting the job done....hahaha
Brian

[Kindsvater Flat]

Isn't 98 cdn like 25 bucks us? :D