PDA

View Full Version : Water Temp Sender?


disco_charger
03-24-2003, 06:49 PM
My sender won't fit in it's current location on the water journal on the head, with the bassetts I bought. Any cool tricks on places to mount? I won't be able to get the plugs out of the front of the heads, so that's not much of an option...HELP!
Infomaniac
03-24-2003, 06:53 PM
The intake manifold should have some place.
disco_charger
03-24-2003, 06:55 PM
On a BDS Blower manifold?
VD CRUISER
03-24-2003, 07:08 PM
I made something like a "Y" fitting and attached it to one of the water outlets on my Mooneyham blower intake.
Infomaniac
03-24-2003, 08:04 PM
I have a competition BDS manifold. I used one of the two pipe fittings in the rear above the water ports in the heads. They are not used anyway. There is no water crossover in the manifold back there.
[ March 24, 2003, 08:06 PM: Message edited by: Infomaniac ]