Help!!Who could build me a bracket?

[novaguy]

Just wondering if any of you guys know of someone who could build me a bracket to attach my fuel filter onto my stringer. I bought a billet clamp to hold the fuel filter, but now need to make a bracket so I could install the clamp on my stringer. I thought that the billet clamp would have through holes in it to install screws, but it didn't. Anyhow, here is a picture of it. It has two threaded holes on it and are size 5/16-24 and are spaced 3/4" apart from one another. I would like to have it mounted as close to the srtinger as possible, as flush as it can be.
http://www.***boat.com/image_center/data/500/351DSCF0183-med.JPG http://www.***boat.com/image_center/data/500/351DSCF0180-med.JPG

[screamdreambrad]

there is a guy on the boards goes by (wish you were here) i think, he builds really bitchin billet parts. he'll get with ya. he also is in the area. sanberdo i believe. he'll fix ya up right. brad

[novaguy]

Thanks Brad, I know who you are talking about. I hope he sees this thread.

[screamdreambrad]

i'm sure with the subject he'll see it right away! if not one of the other guys will let him know. or you can pm him. brad

[screamdreambrad]

novaguy, i sent brian a pm. he'll find ya soon i'm sure. brad

[wsuwrhr]

Here I am,
I could do that, Now I see why you can't use the clamp it came with. I could come by and pick it up, or if you can measure the OD accurately that would work too.
Do you want to use one clamp, or two(one on each end)?
Shoot me a call
Brian
909-883-3739

[BrendellaJet]

Why not just through-bolt through the stringer into that bracket?

[novaguy]

Brendella,
I don't have access to the other side of the stringer.

[novaguy]

Brian,
I don't need the clamps made. I already bought this one, not knowing you would be able to make one for me. Anyhow, I need a bracket that I could attach this clamp onto (it has two threaded holes size 5/16-24 that are spaced 3/4" from each other) and have the bracket attached to the stringer with screws. Hope that make sense. If not, the diameter of the fuel filter is 2", if you wanted to start fresh.

[mgar_red]

Cheap alternative, if last resort, get some aluminum angle at HD or Lowes and butt two small pieces against each other. ie: first one to your stringer, second on your billet clamp, then join the two. Lot of holes to drill... but hey... it's aluminum, no biggie. Just to get you going anyway. :wink:

[wsuwrhr]

Got her all done. Need to pick up some screws.
Brian

[THE BOSTON SIDEWINDER]

NOW THAT'S CUSTOMER SERVICE!...BILL.

[novaguy]

Thanks brotha....sent you a PM asking you how it's going, not knowing you had already replied here. Don't worry about the hardware, I can take care of that. Now post a pick of that bad boy:D