Enderle Injection - start up Pill size

[Customlinkage]

Hello everyone,
How do you set up enderle injection? The unit is a bird catcher and has a 115 pill in the main bypass. Its being installed on a BBC with 8.5 static - 540 cid, 10lbs - 16lbs blower, 17% to 25% overdriven. The unit is going to burn gas and the pump is 80A1, 7gpm.
I don't know what the presure setting are in the by pass check valves are set to.(the idle or main).
Willis
[This message has been edited by Customlinkage (edited June 05, 2002).]

[revndave]

I HAVE A 475 WITH 8.17 COMPRESSION.10-71 AND A BIRDCATCHER.5% OVERDRIVE=10.3LBS.I USE 31 NOZZLES,122 PILL.TESTED ON WESTECH DYNO.

[Infomaniac]

Originally posted by Customlinkage:
Hello everyone,
How do you set up enderle injection? The unit is a bird catcher and has a 115 pill in the main bypass. Its being installed on a BBC with 8.5 static - 540 cid, 10lbs - 16lbs blower, 17% to 25% overdriven.
I don't know what the presure setting are in the by pass check valves are set to.(the idle or main).
Willis
What size pump? That will be the most important variable for starting off.
Gas or Alcohol?

[hulshot]

I hope its gas that pump seems small for alcohol, also what type of barrel valve? 115 in the main that seems like alot of return to the tank, what's your high speed poppit set at and how about to idle check?

[Fiat48]

Need more info. What altitude are you at? How big a boat is this motor in? Desired top RPM? Idle by pass spring should be 2 to 5 lb. to start. Forget the high speed for now. If fuel return line is over 3 ft long, need to know.