Ron Hill Props?

[jlnorthrup122]

I just got a killer deal on a 15" diamiter prop couldn't pass it up for the price!! My question is: on the front of the prop there is a 32 molded in to it on the front of the hub sleave edge. is this a 32 pitch prop I am sure it is just thaought I would ask! and also ther is a 196 etched into the rear of the hub housing I think thos is the rake can anyone confirm or corect this statement?
Getting pics to post!
Thanks

[jlnorthrup122]

here is some pics:
http://i3.ebayimg.com/03/i/01/90/dc/0d_1.JPG
http://i13.ebayimg.com/03/i/01/90/e1/37_1.JPG
http://i7.ebayimg.com/03/i/01/90/ff/4f_1_b.JPG

[Dr. Eagle]

they sell on ebay is that where you picked it up?

[jlnorthrup122]

Yes I got this off Ebay from some dude from Lacern Ca. I am pritty sure it is a 32 P

[Tom Brown]

Originally posted by jlnorthrup122
My question is: on the front of the prop there is a 32 molded in to it on the front of the hub sleave edge....and also ther is a 196 etched into the rear of the hub housing.
That will be a 17p thru hub, round ear. The 196 denotes 16 inch diameter.

[Dr. Eagle]

Originally posted by jlnorthrup122
Yes I got this off Ebay from some dude from Lacern Ca. I am pritty sure it is a 32 P
I think your read of the numbers is correct.
I was going to buy a high 5 prop from him, but then I saw it came w/o hub and didn't appear to be such a good deal.

[jlnorthrup122]

Bronson hill props will rehub it or hub it for around $80.00
If this is a 17P then its no good to me!
Were did you get 17P from Tom Brown?
this thing must hav been trimmed cause it measures 7.5" from the center of the hub to one blade tip.

[Tom Brown]

What's wrong JL, do you doubt my information? Next thing you'll be telling me is this isn't a thru hub prop. :D :D :D
It was a joke, JL. Disregard everything I've said. I'll just laugh my ass off up here in the far north where there is nothing better to do than **** with people on the Internet.

[Dr. Eagle]

Originally posted by jlnorthrup122
Bronson hill props will rehub it or hub it for around $80.00
If this is a 17P then its no good to me!
Were did you get 17P from Tom Brown?
this thing must hav been trimmed cause it measures 7.5" from the center of the hub to one blade tip.
I don't know, but I think that rake looks awaful steep for a 17". I am not sure but the 196 may be .196 root blade thickness...????

[Tom Brown]

Originally posted by Dr. Eagle
I am not sure but the 196 may be .196 root blade thickness...????
That's the original retail price of $1.96

[jlnorthrup122]

Awh thank god I was beginning to think you were a dumb ass!!:D :D Then I thought you might have paid some scientist to state that in theory that my prop actually was a 17P!:D but then I started to think: isn't Tom brown a Jetboat guy?:D You about had me!:cool:

[Jrocket]

Originally posted by Tom Brown
That will be a 17p thru hub, round ear. The 196 denotes 16 inch diameter.
?P,Non thru hub,cleaver.:D

[jlnorthrup122]

Originally posted by Tom Brown:
That's the original retail price of $1.96
I got Hosed Tommy I got Hosed Tommy!:D
Originally posted by Dr. Eagle:
I don't know, but I think that rake looks awaful steep for a 17". I am not sure but the 196 may be .196 root blade thickness...????
That would be between 1/8" to 3/16" looks more lik 3/8" .375
could be rite though.

[Tom Brown]

Originally posted by jlnorthrup122
I was beginning to think you were a dumb ass!!:D
Speaking of irony, how about some fresh pictures of your cat project? Those last bulkhead pictures looked good but you said you had more done than that.
:)
:D

[jlnorthrup122]

That dumb ass part was only a joke:cool: I should have stated that sorry! normally if I think such a thing of someone I just keep it to myself. So consider yourself a geaniouse in my book! sorry no cat pics tonight boys gota go tend to mama!:D but I will see what I can do tomarow if I get off work in time for pics! don't expect much though! the cat is earning her name Procrastinations!;)

[Tom Brown]

Originally posted by jlnorthrup122
normally if I think such a thing of someone I just keep it to myself.
There's no need for that. :D
We're all friends here. In fact, I wish you the best of luck with the orgasm. http://www.***boat.com/ubb/icons/icon14.gif

[Dr. Eagle]

Originally posted by jlnorthrup122
Originally posted by Tom Brown:
I got Hosed Tommy I got Hosed Tommy!:D
Originally posted by Dr. Eagle:
That would be between 1/8" to 3/16" looks more lik 3/8" .375
could be rite though.
Shizzle, well it was a guess.............:D