TURN KET 454 NEEDED!!!

[Eric455]

Okay people here it goes.
i need someone to build me a turn key 454 bbc. i need about 550 hp. with 9"1 compression. i need the whole long block to be built. i have oil pan i have valvecovers i have intake i have carb thats. all i have for now. i need long block ready to drop in. if anyone knows who will take this job. please e-mail me at araik2000@earthlink.net.
any info would be very helpfull. thanx
eric

[RiverToysJas]

NO problem bud, talk to these people (http://www.beckracingengines.com) !!! :D
RTJas :D

[Squeezing Spectra]

Eric shoot me an E-mail or give me a call 714-209-0390 i think i might have just what your looking for. Thanks Bruce

[502procharger]

just wondering, if you are starting almost from scrach why would you not build a 502 or 540. i was just wondering. i figure it could not cost that much more to go with the more reliable hp with the bigger cubes.

[Eric455]

you know what. thats acually something to think about. for ex. from the top of head. how much would say a 540 would cost? from scratch that is..
eric

[DetroitJim]

Yeah, what 502 said. You can buy a BBC Eagle or Scat crank with 4.25 stroke for the same price as stock 4.0. Now we're up to a 482. A 502 block is pretty common these days. Throw that crank in it, instant 540! You could build it with 8 to 1 or 9 to 1 pistons and a mild street cam, it will idle at 600 rpm and make 550 horse no problem, at a lower rpm with way more torque. Go big!!
DJ

[BrendellaJet]

Im building a 540 for $6300. That will include everything from the crank up to the intake manifold.

[502procharger]

i have a comp 502 475hp+ low hrs ready to drop in 5k with EVERYTHING. it would not take much bring it up to the 550hp range. 650hp with a light boost procharger. let me know if you have any interest. i also have a set of 500hp heads and intake, with manely sever duty valves and mild porting. just magged and glass beaded. $1,000.00
good luck with whatever you do.

[Well Done]

Hey Eric455...
Infomaniac, moderator for the blower motor section is building me a new 540. Contact him about a custom build. I am going bigger cubic inch and have a procharged 496 that came out of my tunnel. Infomaniac is authorized to part it out. Dart heads,forged crank, aluminum intake,M3 Procharger with 3 blower pulleys and belts, innercooler msd ignition, blower pistons, good H-beam rods etc. Contact him, he can point you in the right direction.

[Eric455]

Well Done:
Hey Eric455...
Infomaniac, moderator for the blower motor section is building me a new 540. Contact him about a custom build. I am going bigger cubic inch and have a procharged 496 that came out of my tunnel. Infomaniac is authorized to part it out. Dart heads,forged crank, aluminum intake,M3 Procharger with 3 blower pulleys and belts, innercooler msd ignition, blower pistons, good H-beam rods etc. Contact him, he can point you in the right direction. thanx