Jazuzzi Intake

[JETBOY03]

anyone know where i can find a intake for a jazuzzi golden eagle?

[BrendellaJet]

No idea. Id try the popular jet gurus...Hi-tech,MPD, Jim Brock, Walts...
Since it sounds like the pump is not in the boat, you could do yourself a favor and try to piece together one of the more popular pumps, depending on what you want to do with it of course...Whats it going into, what are your plans.

[JETBOY03]

the pump is in the boat right now, the boat is a 19' ranger. i got the boat from my dad and looking at the intake i noticed that the fins on each side of it are brokken off. is it ok to run it without the fins or should i look for a new intake.

[BrendellaJet]

okay. I think it will work okay, but I believe the fins aid in turning. You could probably have someone weld some new ones on, or add a turning fin to the bottom. If you're not trying to break any speed records, it will probably work as is now, just may get a little loose on you at top speed, or when going over rollers...my $.02.
Call Jack at MPD.

[Duane HTP]

I think I have one. Give me a call tomorrow, and I'll go look. Duane HTP 316-794-8616

[American Turbine Man]

If it is a Jacuzzi Golden Eagle, it doesn't have an intake. It's a mold insert type jet.
ATM

[OMEGA_BUBBLE_JET]

I have a stock grate for a yj pump that I will give you if you pay the shipping.
Just looking out for a fellow boater:) It is undamaged and in perfect condition.
Omega

[Duane HTP]

ATJ Man, You are right on that. I didn't read his post very carefully.