head bolts

[Sinbad]

I need to change out one head bolt. The front arp head bolt is too tall to clear the header flange. The original bolts are half as tall. Can i change the one bolt and tork it without hurting anything Thanks all Bill

[Infomaniac]

Keep the good bolt and relieve the header flange.
Mark the spot with a sharpie and grind away.
If not - changing one bolt is OK
[ September 15, 2003, 06:55 PM: Message edited by: Infomaniac ]

[wideopen545]

we used arp studs on my bbc and i had to grind the hell out of the flanges to make them fit

[Sinbad]

Thanks guys I looked at grinding but it would be real close to cuttin into the tube its self Thanks again

[Sinbad]

double again
[ September 15, 2003, 09:28 PM: Message edited by: Sinbad ]