DORIGHT
05-09-2004, 09:26 AM
New house and lack of intrest forcess sale;
This thing needs a new home
Located in the Las Vegas area
1977 Bahner Jet Boat, This is a speed boat / Ski boat
(although I have never had any one ski behind it! Chickens!)
Main collor yellow with 3 shades of blue accents (Stripe's)
75.5 mph gps verified with an air leak in the pump, with current engine
(if air leak was fixed it would be faster and quicker)
Ride plate, Race loader,Shoe, stuffer plate,over transom Bassett headers, place diverter,
Will include a new A impeller and a used B impeller
(Place Diverter Hydraulic controled, new nozzel insert and hydraulic ram)
(Place Diverter value 800?)
(Throws a Roster tail 60 feet in air about 300 feet behind boat!(estimate) never phsicaly measured with a tape!)
Freshly built 454
(Built for a Jet Boat)
(low comp. pump gas engine)
(Engine value $2500.00+)
(Not Junk!)Cost to rebuild exceeds value im estemating, absolutly zero time hasn't even been installed or started yet! New .020 over flat tops, fresh bore and hone, fresh turnd crank, fresh recon on rods with New ARP rod bolts, heads wear surfaced and rebuilt with all New valves and New springs to match New cam and liftors Comp Cam components. all assembled
Will include two 660 center squirter carbs
(Tunnel ram if I can find it? not installed on eng. yet)
Four point engine mounts, Stainless steel hoses threw out all AN fittings
Tandom axle trailor with mags
Boat Needs cleaning, rug & seat upholstry both looking kinda ragged but not real bad.
Might be willing to meet half way if price is met and no backing out of deal.
$4000.00 (you instal engine)
Might be willing to let go of current engine as well but I need at least $5500.00 for it. (Compleet Carbs to Pan this engine is Bad to the Bone hi compression with all the good stuff freshend up heads last season engine has less than two hour's run time total)
willing to sell or trade all or part
Email me with your Ideas akokdennis@aol.com
All email's will be returnd if they are geniune intrest in the boat or engine photo upon request
Dennis
Gear head
This thing needs a new home
Located in the Las Vegas area
1977 Bahner Jet Boat, This is a speed boat / Ski boat
(although I have never had any one ski behind it! Chickens!)
Main collor yellow with 3 shades of blue accents (Stripe's)
75.5 mph gps verified with an air leak in the pump, with current engine
(if air leak was fixed it would be faster and quicker)
Ride plate, Race loader,Shoe, stuffer plate,over transom Bassett headers, place diverter,
Will include a new A impeller and a used B impeller
(Place Diverter Hydraulic controled, new nozzel insert and hydraulic ram)
(Place Diverter value 800?)
(Throws a Roster tail 60 feet in air about 300 feet behind boat!(estimate) never phsicaly measured with a tape!)
Freshly built 454
(Built for a Jet Boat)
(low comp. pump gas engine)
(Engine value $2500.00+)
(Not Junk!)Cost to rebuild exceeds value im estemating, absolutly zero time hasn't even been installed or started yet! New .020 over flat tops, fresh bore and hone, fresh turnd crank, fresh recon on rods with New ARP rod bolts, heads wear surfaced and rebuilt with all New valves and New springs to match New cam and liftors Comp Cam components. all assembled
Will include two 660 center squirter carbs
(Tunnel ram if I can find it? not installed on eng. yet)
Four point engine mounts, Stainless steel hoses threw out all AN fittings
Tandom axle trailor with mags
Boat Needs cleaning, rug & seat upholstry both looking kinda ragged but not real bad.
Might be willing to meet half way if price is met and no backing out of deal.
$4000.00 (you instal engine)
Might be willing to let go of current engine as well but I need at least $5500.00 for it. (Compleet Carbs to Pan this engine is Bad to the Bone hi compression with all the good stuff freshend up heads last season engine has less than two hour's run time total)
willing to sell or trade all or part
Email me with your Ideas akokdennis@aol.com
All email's will be returnd if they are geniune intrest in the boat or engine photo upon request
Dennis
Gear head