Show me your interior!!

[rssfla]

Hey guys, I'm getting ready to build a new interior, actually already started to do the same as what was in the boat when i bought it. But after looking at some of your boats, i think a change is in order. Please post some photos of your interiors, I really need some ideas!
Thanks

[Bryan Rose]

here you go... And I did it for less that 500 buckshttp://www.***boat.com/image_center/data/500/766DSC01755-med.JPG

[Kachina26]

Looks real nice. Mine Came with the boat
http://www.***boat.com/image_center/data/522/1284kachina15-med.jpg

[Hakuna Matata]

21' Bahner "Hakuna Matata" -Means no worries_

[rssfla]

ttt

[roostwear]

Don't know if you're into the "new" style interiors, or retro, but here's what I designed for my 83 Advantage.
http://www.roostwear.com/email/int2.jpg

[79TahitiCBB]

Originally posted by Bryan Rose
here you go... And I did it for less that 500 buckshttp://www.***boat.com/image_center/data/500/766DSC01755-med.JPG
Bryan,
That interior is almost exactly what I want to do. Did you do it your self? Looks great.
Mike

[Cas]

not a great picture but it's the only one I could find of my 21' Tahiti interior. Boat was sold a couple of months ago so I can't take any new pics.
http://www.hotboatpics.com/pics/data/500/387021interior-med.jpg
here's couple of pics of our 19' Tahiti's interior. The first pic is when I first brought the seats home, they weren't installed yet and the 2 front seats were reversed. The 2nd one is obviously after they were installed. This interior cost me $600. including carpet and all new foam along with 4 pouches. 1 of the pouches mounts to the front of the engine cover with a "V" design with the red colors.
http://www.laidbackboaters.com/6095b040.jpg
http://www.hotboatpics.com/pics/data/500/3870interior-med.jpg
and here's our 18' Bahner. This interior is the original, if we keep the boat, it'll be updated to something a little less "hot".
http://www.hotboatpics.com/pics/data/500/3870frontpol-med.jpg

[HBjet]

http://www.***boat.com/image_center/data/500/20DSCN6842-med.JPG
HBjet

[Unchained]

Not a lot of interior in a boat this small.
http://www.***boat.com/image_center/data/500/220UnchainedTopView-med.jpg
I want to add a couple jump seats facing the center like HB jets interior has.
At least I'll be able to pick up a skier then.

[lucky]

my friend and i did it

[LakesOnly]

Man, there are some damn nice looking ineteriors in this thread. Here's what I got:
http://www.***boat.com/image_center/data/520/350Southwind_Overhead.jpg
LO

[propless]

26' Sleekcraft (jet drive) with new interior I completed recently.

[Cole Sanger]

Why do you have a picture of GoFastRacers boat as your Avatar? It is a v-drive and your user name is propless.

[AZKC]

Its probably Art's alter ego:D

[GlastronGuy]

http://realjetboats.com/chrissmithnca/chrissmithnca3.jpg

[dankirk]

Here's mine, outside and inside:
http://www.***boat.com/image_center/data/521/617DSC00342-med.JPG
http://www.***boat.com/image_center/data/521/617DSC00331-med.JPG

[Sleek-Jet]

Originally posted by Cole Sanger
Why do you have a picture of GoFastRacers boat as your Avatar? It is a v-drive and your user name is propless.
I secretly enjoy the irony of this. :D
Nice looking fabric work guys.

[likeFATHERlikeSON3]

all originalhttp://www.***boat.com/image_center/data/521/230top2-med.jpg

[moneysucker]

Here is a set I built for my roommate. Frames only but it may help.

[moneysucker]

Here is annother set of measurements.

[BrendellaJet]

MoneySucker-those look like a lot of other seats I have seen. Did you copy the design or just eye ball it? Any pics of the finished work?

[BrendellaJet]

Also, whats the measurement of the front of the arm rests? I tried to calculate using geometry, but theres not enough info for me to figure it out...(that could be because my geometry sucks)

[BrendellaJet]

bump...

[lucky]

NOT BAD FOR 13 YEARS OLD ( GETTING TIME TO UP GRADE )

[Danhercules]

just redone. I kept the old school look.
http://www.hotboatpics.com/pics/data/500/4763IM001151_1.JPG
http://www.hotboatpics.com/pics/data/500/4763IM001154.JPG

[roostwear]

Very cool keeping the old school look Dan. Let's shoot some clear on that flake and it'll be done!

[rssfla]

Thanks alot guys, this does help. I do like what you did dan, Thats what mine is kinda like. The theme of the boat is old school so i may do similar to what you did!
Tanks!

[moneysucker]

I am getting the measurements. My roommate is Getting them. I used a design as a pattern. I did change the back seat a little to match the front sillohuette. I took the pattern from a set that Petrofied got for Rubber duckies old boat. Petrofied has the same front seats in his boat. These are not finished. I built them for my roommate and he was to do the glass strips at the seams and resin the rest. 5 months later and he is almost done.

[MarKist]

here's mine I got 700.00 in it, all new wood and glass!will do for now!:D http://www.***boat.com/image_center/data/500/1164IM000252-med.JPG

[Mrs. Psycho Squid]

Originally posted by moneysucker
I am getting the measurements. My roommate is Getting them. I used a design as a pattern. I did change the back seat a little to match the front sillohuette. I took the pattern from a set that Petrofied got for Rubber duckies old boat. Petrofied has the same front seats in his boat. These are not finished. I built them for my roommate and he was to do the glass strips at the seams and resin the rest. 5 months later and he is almost done.
Here's what they were modeled after. http://www.***boat.com/image_center/data/520/999Petrofied_Seats-med.JPG