PDA

View Full Version : Whipple pricing


HP350SC
10-06-2003, 04:59 PM
Hey infomaniac,can you still get a deal on a Whipple?I'm ready to buy the stage 3 kit in polished or blue for a carbureted HP500.Also their kits say complete with hoses etc.-does it have hardware and fittings to plumb the intercooler too?
Infomaniac
10-06-2003, 05:16 PM
Yes I can get a deal. Whatever they say in the ad (site) is true. Let me check with Dustin on the intercooler stuff.
HP350SC
10-06-2003, 06:04 PM
Great!-thanks.Not sure if I need the 2.3 or 3.3...motor is stock (70hrs.) I am replacing valve springs and head gaskets-possibly cam if perfomance gain can be expected with stock heads and manifolds.Would prefer the polished kit if not too pricey.
HP350SC
10-08-2003, 08:00 AM
Info-tried to PM you from work but error message. Will try again at home.
Infomaniac
10-08-2003, 11:15 AM
The 2.3 is a bit small for that engine. You really need the 3.3
A cam upgrade would help but the best upgrade would be to put a Dominator on it. The stock 800 is a bit small.
All of the cooling lines are included but you will need to come up with fuel lines.
The stock kit comes blue and polish is an additional 800.00
Check PM for prices.
You will not be dissapointed !! Whipples pull like crazy.
Ron
jackpunx
10-08-2003, 12:50 PM
Infomaniac:
The 2.3 is a bit small for that engine. You really need the 3.3
A cam upgrade would help but the best upgrade would be to put a Dominator on it. The stock 800 is a bit small.
All of the cooling lines are included but you will need to come up with fuel lines.
The stock kit comes blue and polish is an additional 800.00
Check PM for prices.
You will not be dissapointed !! Whipples pull like crazy.
Ron thats the upgrade I have.. LMK if you want to come down and go for a ride.. This way you can see what your getting into... I have talked to you.. if you go for a ride .. there will be no turning back.. :D
HP350SC
10-08-2003, 02:08 PM
Al'coleholic- your message box is full.
JLaughreySS24
10-08-2003, 06:10 PM
Jackpunx, Thats the same set up that I would like to change over too in the winter! Do you have any pics of your carbed whipple set up? I would love to see it. I have a B&M 250 intercooled right now. Would love to switch over soon. Thanks
al cole'holic
10-09-2003, 07:59 AM
HP350SC:
Al'coleholic- your message box is full. ..sorry bout that, good to go now!! :D
jackpunx
10-09-2003, 08:16 AM
JLaughreySS24:
Jackpunx, Thats the same set up that I would like to change over too in the winter! Do you have any pics of your carbed whipple set up? I would love to see it. I have a B&M 250 intercooled right now. Would love to switch over soon. Thanks http://www.***boat.com/image_center/data/500/943Stoker_blower_shot-med.jpg
Thats the only one I have here.. Let me know if you have any other questions
JLaughreySS24
10-09-2003, 10:32 PM
Thanks for the pic. Looks nice. Would like to check it out sometime.
BiggusJimbus
10-10-2003, 03:46 PM
Hey HP,
That Stoker of your's will be sick with a whipple on it. Get it built.
Don't forget a release for that hatch when you got no power. wink
Wish I had gotten more pics of it.
http://www.***boat.com/image_center/data/500/79522_Stoker-med.jpg
HP350SC
10-13-2003, 07:38 AM
Thanks for the pic. BiggusJimbus. I'm going to have to go with the blue kit rather than polished,need the $800 for other things.Sure hope this Whipple is all it's cracked up to be. I NEED to hit 110 or it's back to the drawing board!
cobaltboats
08-24-2004, 04:12 PM
infomaniac, does whipple make a charger for this engine . thanks guys Im new here . been looking with no luck.
SHAKEN Not Stirred
08-25-2004, 09:42 PM
dustin@whipplesuperchargers.com
SHAKEN Not Stirred
08-26-2004, 04:32 PM
Hey HP350SC....
PM me....
CJG