Rogers owners

[Duke]

How long of a forward/reverse cable is needed in the 18foot version with a e pump?
13 or 14 feet sound right?

[HalletDave]

Originally posted by Duke
How long of a forward/reverse cable is needed in the 18foot version with a e pump?
13 or 14 feet sound right?
Duke,
Just remove the cable and measure the length.;)

[Duke]

i cant get it out, :D

[HalletDave]

Originally posted by Duke
i cant get it out, :D
Never mind.:D
Take some rope and try to follow as close to the cable as possible. Use tape if needed to secure to the cable in order to get the most accurate measurement possible.
Or just take the boat in and have them remove the old cable and replace with the appropriate replacement cable.:D
Good luck:)

[roostwear]

Originally posted by Duke
i cant get it out, :D
If ya can't get it out, how ya gonna replace it?:D

[Tom Foolery]

If it is a morse cable the length should be printed or stamped (i can't remember which) on one of the ends. The last two numbers are the lenght and the first numbers are the cable style.

[Duke]

Originally posted by Tom Foolery
If it is a morse cable the length should be printed or stamped (i can't remember which) on one of the ends. The last two numbers are the lenght and the first numbers are the cable style.
i'll go look rigtht now:p

[shaun]

Duke: i'm not sure about your setup but with my boat, i had to disconnect the cable from the shifter dilio and pull it out from the back of the boat. (standing at the back pulling it thru) It wouldnt fit the otherway..

[Duke]

its bolted to the inside of the hull and i cant get that off, i tried taking off the interior but i couldnt its pretty tight inthere, i tried pulling it with no give.
i'm just going to drag it in in the morning.