6-71 / 8-71 Intake

[Tee]

Anybody out there have a good used one for a BBC Large oval port that they might want to get rid of?
----- Tee

[Fiat48]

I've never seen a round port blower intake, so used might be tough. Wiend probably makes a street type, possibly round port.
You would be better off considering a "peak floor" style manifold rather than a flat floor type if given a choice. The peak floor really helps those hot cylinders in rear.

[Heatseeker]

A rectangle port manifold will fit on a set of oval heads. I'm running a BDS rect. port manifold on a pair of 049 heads. No problems so far. I'm sure there's some flow restriction, but on my mild set-up, it probably doesn't amount to much.
I'm not saying it's the best way to go, but it will work.

[Infomaniac]

I used a square port blower manifold on oval heads years ago because that was all that was available. Engine ran good.

[Tee]

Ok, fair enouph.
Does anybody have a peaked floor BBC Blower Intake for sale?
:D

[Fiat48]

New BDS ones are here: http://www.goodvibesracing.com/Blower%20Manifolds.htm
Mooneyham and Littlefield also make peak floor manifolds.
Good luck on finding used.

[Heatseeker]

Fiat48:
New BDS ones are here: http://www.goodvibesracing.com/Blower%20Manifolds.htm
Good luck on finding used. That's where I bought my whole set up. Ask for Jim. He's real helpful.
Every once in while this guy lists a used manifold: racecarparts.com (http://www.racecarparts.com )
[ January 22, 2003, 03:03 AM: Message edited by: Heatseeker ]

[DogHouse]

You lookin' for one of these?
http://www.kuhlsuperchargers.com/images/pic%20p07/manifold_bb_24110_a.jpg
$419 from Kuhl.
-brian

[Froggystyle]

Dog House nailed it. That is the only place I found one when I was looking for my Daytona. I ended up getting a set of rectangular ports built and using the rect. port BDS manifold that came with the blower.

[superdave013]

Fiat48:
New BDS ones are here: http://www.goodvibesracing.com/Blower%20Manifolds.htm
Mooneyham and Littlefield also make peak floor manifolds.
Good luck on finding used. I bet he has a used one too. Jim's really cool. I bought a used Littlefiled one from him once. You better call him soon if ya want a used one. He'll be selling a ton of shit out at Long Beach this sunday for sure.

[Tee]

Just checked with Jim,
Nothing used :(
Bunch of them for SBC on E-bay. Patience I guess. pig_flyi

[full throttle]

I've got 2 of the Littlefield polished blower intakes out in the shop, less than 8 hrs. use (dyno time only) $375 ea. + shipping.

[EWB]

I have a BDS std deck Ill take 275.00 if you want pic's e-mail me eric3021ss@peoplepc.com
Thanks EWB