Anybody run msd crank trigger with a sterndrive

[565edge]

Does anybody run msd crank trigger with a sterndrive.Looks like i will need custom pullies made.My sea water pump bolts right where the msd bracket goes.If any of you have pics of this set-up lets see em.I want to run crank trigger as i already have it.Thanks.

[Jordy]

I know Doghouse runs some kind of a crank trigger, I don't know if it's MSD though. He might be one to talk to. ;)

[DogHouse]

Mine's a little different than the MSD. The Electromotive crank trigger uses a 1/8" thick, 60 tooth steel wheel and a mag pickup that's mounted to the timing cover. I just spaced out all of the accessory drives to match. I think the MSD flying magnet deal is thicker, but you could machine up some spacers to line up pulleys. Not sure about the pickup mount, but I'm sure you could come up with something custom.

[cjordan]

I ran one (MSD) on the 632" in my Carrera cat. It was a pain in the ass with all the custom brackets/spacers etc to make the sea pump and other accesories line up correctly while utilizing the trigger. Everything has to be spaced out by the thickness of the trigger wheel. After fighting it for 2 seasons and realizing I never change my timing anyway, I went back to a regular distributor/ standard brackets, no spacers :wink:
If anyone has a need for the system I will sell it. MSD distributor, trigger, and wheel.

[565edge]

I am going to run the crank trigger.I am going with a product engineering remote water pump(It will match my fuel pump).I am going to run their alternator with the cog belts for alt and powersteering.

[MAXIMUS]

Edge you ever get hooked up with that daytona???

[565edge]

I got a 22 daytona less motor and drive and i am in the process of rigging it.Heres a pic.http://www.***boat.com/image_center/data/520/1131P1010047-med.JPG

[MAXIMUS]

Nice looking ride!

[DogHouse]

565, great looking Daytona, very clean! With all that trick hardware you're throwing in there, that's going to be a very nice ride!
:cool:

[565edge]

Thanks guys.I was going to put the motor in yesterday but teague sent me the wrong flywheel.Maybe this weekend.Hey cjordan i would like to see more pics of your set up.I seen a old pic and you are also running a dart tunnel ram.I would like to see your linkage set up and cable bracket.Thanks.

[Rock-it man]

Originally posted by 565edge
I got a 22 daytona less motor and drive and i am in the process of rigging it.Heres a pic.http://www.***boat.com/image_center/data/520/1131P1010047-med.JPG
Do you need a drive for it as I have an IMCO 4x4 drive setup for sale !! you can e-mail me at rockitman1@charter.net