canfield alum heads

[slotracer]

are they a good head i am looking at a set on
ebay they are 310 runners. thanks
pat(slotracer) :D

[GofastRacer]

Canfields are good, how much??, I like the Dart Pro's myself!. :cool:

[slotracer]

$1600.00 for the set they say they are new.
pat(slotracer) :D

[GofastRacer]

Nothing wrong with that if they are complete!.. :cool:

[sanger mike]

pat, the canfields are good heads. if your going to spend the money take a look at the pro topline heads on ebay. your moving air now, and alot more fuel. you better check those gas tanks in the boat and see what size full pickup is in there 1/4 inch is not enough. you need to run 8 an all the way through alot of pepole make this mistake and run the motor lean, then they say the motor builder did somthing wrong and never realized the real problem. boat blower motors need alot of fuel because of the constant load on the motor. spend your money on the fuel system. look at KUHLS and BDS web sites there is alot of info to read. :D

[Liberator TJ1984]

I got a set of Pro-Topline 320's set up the way I wanted for $ 1850.00 shipped. from all Chevy Engines out of Whitney, Tx. and very pleased with them...Great flow #'s out of box also
Gopherr

[sanger mike]

Liberator TJ1984:
I got a set of Pro-Topline 320's set up the way I wanted for $ 1850.00 shipped. from all Chevy Engines out of Whitney, Tx. and very pleased with them...Great flow #'s out of box also
Gopherr thats whats going on my new motor PRO-TOPLINE 320's. and your right liberator they do flow the big numbers. eek!

[slotracer]

well i went and did it ordered a set of 310 canfields talked to the guy and told him what
my set up was and he said the 350's would be to
much that the 310's would work with my cam and
blower set up. said they would be good to 800 h.p.
but i am not looking to go that much. now on with
the bottom end. eek!
pat(slotracer) :D
[ July 22, 2003, 04:37 PM: Message edited by: SLOTRACER ]