PDA

View Full Version : KILLER BLOWER MOTORS!!!!!!!!


rivercrazy
11-25-2002, 03:19 PM
At least it looks like a killer motor to me. See the heads and valve covers on that sukka. How about the 1471 blower.
That would look BAD ASS in just about any tunnel hull..... :D eek!
http://free.***boat.net/gallery/Reader_Rides/Jet_Boats/blowermotor.JPG
http://free.***boat.net/gallery/Reader_Rides/Jet_Boats/bbc14711.JPG
[ November 25, 2002, 04:27 PM: Message edited by: rivercrazy ]
rivercrazy
11-25-2002, 03:43 PM
This looks like one hell of a blower motor as well.
http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/mk_quad_a1.JPG
rivercrazy
11-25-2002, 03:51 PM
This is from Cobra Performance Engines but not good picture.....
Sc 1200 hp
Specifications
- 700 cubic inch displacement
- 5.250 inch stroke (Lunati 4340 Internal Balance)
- 4.600 inch bore (Venolia Pistons)
- 8:1 compression
- 1200 H.P. @ 5,700 RPM
- Regular gas (Leaded or Unleaded) 92 Octane
- Twin 4 barrel 1050 CFM carburetor (Holley)
- Blueprinted and balanced
- Brodix aluminum cylinder heads, fully ported & flowed
- 17 Quart custom designed oil pan
- Dart Merlin block (super tall deck)
- Crane solid roller cam shaft
- Lee intercooler
- Crane electronic ignition with built in Rev-limiter
- Dual oil cooler bell housing
- Stainless Steel Cobra water inlets & outlets
- Race quality components and assembly
- BDS 1671 Supercharger
Dimensions (without manifolds)
For Side-By-Side Installation......Minimum 35” Centerline
Width (head on)............................................... ..27”
Height (from crank shaft to flame arrestor)...........37”
Height (fromoil pan to carburetor).......................47”
Length (with borg warner direct drive gear)........46”
roln 20s
11-25-2002, 04:05 PM
I'm all about that BBC quad rotor whipple. That is so bad ass! But then again, I will be more than happy to take the other one too.
Roln 20s
rivercrazy
11-25-2002, 04:29 PM
Heres a pic of the Cobra Blower Motor. YIKES!!!!!!
http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/enginesparts1.JPG :D
Infomaniac
11-25-2002, 05:33 PM
rivercrazy:
Heres a pic of the Cobra Blower Motor. YIKES!!!!!!
http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/enginesparts1.JPG :D Specs included everything but price.
Hustler
11-25-2002, 07:36 PM
rivercrazy:
At least it looks like a killer motor to me. See the heads and valve covers on that sukka. How about the 1471 blower.
That would look BAD ASS in just about any tunnel hull..... :D eek!
http://free.***boat.net/gallery/Reader_Rides/Jet_Boats/blowermotor.JPG
http://free.***boat.net/gallery/Reader_Rides/Jet_Boats/bbc14711.JPGI'll take this one with a set of zoomie's :D
andy01
11-26-2002, 09:01 AM
rivercrazy:
This looks like one hell of a blower motor as well.
http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/mk_quad_a1.JPGThat will look real nice in a 25' Shockwave running oh some where around 100 plus! :D
rivercrazy
11-26-2002, 10:43 AM
I agree. It would even fit under the hatch. Affording it is a different matter entirely....
rivercrazy
11-26-2002, 01:50 PM
Here's the link to Cobra. Brace yourself on the pricing. These are built mainly for the east coast poker run rich boys.
http://www.cobrapower.com/home.htm
Infomaniac:
rivercrazy:
Heres a pic of the Cobra Blower Motor. YIKES!!!!!!
http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/enginesparts1.JPG :D Specs included everything but price.