Need service in the 909

[Scream]

I posted this in HotSpots West also, but...
Hey folks, I need a dependable place to take my baby for it's first 20 hour service. Mercury that is. I live in Rancho Cucamonga and am willing to travel up to 5 miles J/K. I took my last boat to a manufacturer that a friend recommended and needless to say I wasn't pleased with the "service" or the results, and consequently didn't consider them while shopping for a new one.
Anyone with any experience they care to share would be appreciated.
Scream < ---slowly rackin up the hours.

[MRS FLYIN VEE]

I thought you were going to call out for whipped cream.. LOL!! :D

[Scream]

Originally posted by MRS FLYIN VEE
I thought you were going to call out for whipped cream.. LOL!! :D
Oh you settle down now LOL
:D :D
Top o the mornin to ya V, How's things with you and Jamie?

[beached 1]

Prime Marine is in Rancho..Nice people there..
http://www.primemarineusa.com/
I think WILDERTANU WORKS THERE :)

[MRS FLYIN VEE]

Originally posted by Scream
Oh you settle down now LOL
:D :D
Top o the mornin to ya V, How's things with you and Jamie?
there great.. He keeps looking at me and calling me Ardie.. the one man party.. LOL!! :confused: :D :D :D

[beached 1]

BTW, saw your boat on the road last weekend..Pictures don't do that gel justice...Nice boat

[Scream]

Originally posted by beached 1
BTW, saw your boat on the road last weekend..Pictures don't do that gel justice...Nice boat
Thanks. Now if I could just keep the greeezy soot off the ass end I'll have it made.

[Scream]

Originally posted by MRS FLYIN VEE
there great.. He keeps looking at me and calling me Ardie.. the one man party.. LOL!! :confused: :D :D :D
Ardie LMAO That's too funny.
And might I say that you and Bre and all those chicks were absolutely beautiful last weekend and great to meet. Anyone with a bod like yours should be stuck up, but your not even close. I had too much fun.

[MRS FLYIN VEE]

Originally posted by Scream
Ardie LMAO That's too funny.
And might I say that you and Bre and all those chicks were absolutely beautiful last weekend and great to meet. Anyone with a bod like yours should be stuck up, but your not even close. I had too much fun.
well thank you.. I try to talk to everyone and I didn't make to many rounds but We had alot of fun.. we will do it again soon enough..
I thank you again for the compliment and I'm sure all the other girls do to.. I am starting to work out so I can try to get mrs op6 next time.. maybe they'll let an old lady get it next time.. LOL!! :D

[Moe_Havi]

I've used Future Marine in Upland for the last 15 years. See Gordon. They are on 9th St., between Campus and Grove.
Moe

[C-2]

Quality Performance Marine in Corona - Rob Clark
Start the second mortgage application now though :eek: :eek: :eek:
They know their shiznit.

[dicudmore]

909
:confused:
offshore in Henderson....
lakeland marine and others in havasu
maverick in van nuys
you need towing/drop off service :confused:

[Scream]

Originally posted by dicudmore
909
:confused:
offshore in Henderson....
lakeland marine and others in havasu
maverick in van nuys
you need towing/drop off service :confused:
C'mon now, the 909 is not such a bad place. At least where we live.
Towing/dropoff service, what a racket that would be, eh? :D

[dicudmore]

I wasn't bagging on living there.....
I've considered it too.
I was implying I didn't know any shops there.
Except shockwave

[BADBLOWN572]

Quality Performance is the only person that I would let touch my Mercury motor in Corona. Rob Clark knows his stuff!

[riverbound]

Originally posted by Scream
Towing/dropoff service, what a racket that would be, eh? :D
It's not a racket but more of a courtesy that we offer @ my shop. I have driven all the way to havasu to pick up and deliver a boat for a customer (for a fee of course)
As far as recomendations GS Marine is the only place other tan myself that touches my boat.

[Outnumbered]

Whatever you do DONT go to M****rs Landing in Pomona. They are the worst. Crooks sold my buddy a "new" engine cover in his boat after an exhaust manifold cooked it. He later found out that they just re-covered the old one. Charged him $1,500. When he went back they told him to pound sand.
OL:(

[BROS&HOS]

Rob at Quality is probably the best in the 909. If you wouldn't mind a trip to Santa Ana, you can take it to Wilkes Marine. He does awesome work. He is also one of the writers and test drivers for Hot Boat. Either way, take some vaseline with you.

[BoatFloating]

Originally posted by BADBLOWN572
Quality Performance is the only person that I would let touch my Mercury motor in Corona. Rob Clark knows his stuff!
I disagree. Took my boat to him 5 times to find a oil leak, he never found it. I took it to Temecula Marine center (Mike) and open hatch stuck finger in and pulled it out with oil on it and said it's a rear main seal leak. So Quality is anything but.......
Mike at Temecula Marine center is a Certified Mercury Master Tech.

[phebus]

Originally posted by beached 1
Prime Marine is in Rancho..Nice people there..
http://www.primemarineusa.com/
I think WILDERTANU WORKS THERE :)
Met hem at OP6. Very nice people, with a beautifull Schiada.

[dicudmore]

forgot about GT..... montclair:confused:
somewhere down there

[RP1]

Originally posted by C-2
Quality Performance Marine in Corona - Rob Clark
Start the second mortgage application now though :eek: :eek: :eek:
They know their shiznit.
Definetly know there shiznit and yes, it will cost you... they will go over every inch of that boat though.

[Bense468]

Originally posted by beached 1
Prime Marine is in Rancho..Nice people there..
http://www.primemarineusa.com/
I think WILDERTANU WORKS THERE :)
Did work there. He is back running CNC's.

[waterboy]

i would not go to gordon at future marine. i would call john cogan at concept marine 909-447-4411. never used him but talked to him several times seems like a good guy. i always go to savage in havasu but thats were my boats at.

[markc]

Originally posted by waterboy
i would not go to gordon at future marine. i would call john cogan at concept marine 909-447-4411. never used him but talked to him several times seems like a good guy. i always go to savage in havasu but thats were my boats at.
John Cogan of Concept did some rigging and service work for my boat, quality work and reasonably priced.

[waterboy]

there you go scream did ya read that.concept marine is in montclair 15 min from you.

[Scream]

Yea, I saw that. Looks like there's plenty o quality shops real close. Thank God.
Thanks for the input everyone, I really appreciate it. Word of mouth is the only way I'd find a reputable service place, IMO

[dicudmore]

GT performance....
I think he's in montclair

[burtandnancy]

GT Performance on the corner of Benson & Arrow (8th st in Upland (909) 982-8391.

[CHEETER-JOE]

Future Marine in Upland

[Cheetin Brad]

John @ Concept re-rigged my boat and did an excellent job,

[PRIMEriverRUNNER8780]

Hey there, if there is anything my team can help you out with, gice me a call. I have an internet service special going on right now, so if you are interested, give me a call. Thanks
Mike
909-484-8338
mramirez@primemarineusa.com

[PRIMEriverRUNNER8780]

Thank you beached 1 for the compliment
Let me know if there is anything I can do for you

[superdave013]

I'll put in a good word for Prime Marine. I have a pretty big project over there and Mike keeps me up to date with progress reports and how far over budget I'm getting. lol Hey Mike, last night I was thinkin and well, now I need..... haha
They can tackle pretty much anything. If you want to see some nice work stop by their shop and take a look at v drive row over there.
They do outdrive work from mild to wild also.