Going for the Edge...here's some spam to help me pay for it.

[WriedtStuff]

I think I am going to try and buy the 92 Edge Stealth I discussed in another thread....but I need to get rid of some of the stuff I have left over from the previous project.
Trailer comes with a FREE Wriedt Maverick hull. Does not include the seats...although they are available seperately. If you have read my other posts...you know that i have replaced all the wood in this boat.....and then found poorly repaired spot on the bottom....Make me an offer.
http://www.mindspring.com/~agood/0c_1_b.jpg
I also have a 12JC Berkley pump with Jetovator. You can see it in this picture.
http://www.mindspring.com/~agood/4f_0.jpg
I have a complete set of brand new teleflex guages, with switches and wiring harness.
http://www.mindspring.com/~agood/90_1_b.jpg
I also have a yellow powder coated hot foot, Hurst style Jetovator trim handle, also powder coated yellow and silver, several control cables, a metal 24 gallon tempo fuel tank. I'm sure there is more but that is all I can think of right now.
Make me an offer...I need to move this stuff so I can move on to a new project.....

[Heatseeker]

Do you have a pic of the trim control handle? Is it a stringer or floor mount ?

[Lightning]

Let me know what gauges you have in that pod, I have a friend who was talking about getting some new gauges put in at the end of this year. Also, what's the price.

[WriedtStuff]

The trim handle is a floor mount....I will get a picture of it tonight..
The gauges are:
RPM, Speedometer, oil press, water temp, voltage, trim, and fuel......they are all brand new with brand new wiring. The switches have several different markings.....bilge pump, blower, nav lights, courtesy lights......I bought this from Sea Fox boats as they were no longer making the model boat this cluster was built for.....They are however current model teleflex guages...I do not have the sending units...but I have contacted Teleflex and have the part numbers for them. I'll take $125 for the set just as it is pictured.

[Ken F]

is it an 80 or 100 mph spedo?
Ken F

[mickeyfinn]

Do you have more pics of the seats? I am a little over an hour from you and am looking for something for my V-drive.

[Lightning]

Originally posted by WriedtStuff
The trim handle is a floor mount....I will get a picture of it tonight..
The gauges are:
RPM, Speedometer, oil press, water temp, voltage, trim, and fuel......they are all brand new with brand new wiring. The switches have several different markings.....bilge pump, blower, nav lights, courtesy lights......I bought this from Sea Fox boats as they were no longer making the model boat this cluster was built for.....They are however current model teleflex guages...I do not have the sending units...but I have contacted Teleflex and have the part numbers for them. I'll take $125 for the set just as it is pictured.
What was the cost for the senders?

[WriedtStuff]

Here's the trim handle...
http://www.mindspring.com/~agood/MVC-519F.JPG

[WriedtStuff]

The speedo tops at 65 MPH.
The senders can be boat at any boat store....seems like the fuel was about $29 the oil pressure was about $18 and the water temp was about $15....I could be off a few dollars.
I do not have any more pics of the seats right now...they are at the uphostery shop....but they have not been re-done yet...I called the guy when I decided not to proceed with the boat and told him to hold off.....they are fiberglass buckets with white vinyl...they were not in terrible shape as I remember....but I do remember that someone had used blue astro turf on the backs instead of having them done at the upholstery shop....that is the main reason I was having them re-done. Here is a pic of teh back seat.....
http://www.mindspring.com/~agood/MVC-520S.JPG
and the blue astro turf:
http://www.mindspring.com/~agood/MVC-521S.JPG

[mickeyfinn]

I was mainly interested in the front buckets but might want to try and give myself a back seat as well. If you get a chance to put up pics of the buckets it would be nice and what kind of money are you wanting for them?

[Some Kind Of Monster]

Do you have the cables that go with the trim handle? I would be interested in them, as well as that switch pod if you decide to sell it seperately.

[WriedtStuff]

Monster,
I do have some cables...not sure which one goes with the trim handle...But I can figure it out.....
Which switch pod are you talking about? The one that has the ignition switch in it? Actually it should really all go as one piece since they are designed to plug together......for $125 you could buy the whole thing, keep the switches and sell the gauges and mak most of your money back. These carling switches go for about $20 each on Ebay.
I plan to put all this stuff on Ebay the 1st of the week...so if you want something....don't hesitate.....
I will try and go get the seats next week...and I will post a pic....
Thanks

[mickeyfinn]

You never said how much you wanted to get for the seats.

[Heatseeker]

What do you want for the trim control?

[Some Kind Of Monster]

WriedtStuff
I will consider buying the whole thing. I will have to check my finances tomorrow. Regarding the cables, all I am looking for is the cables. I don't need the whole thing. I am also looking for a steering cable. If you are looking to split, great, if not, no problem!

[WriedtStuff]

OK, I haven't posted prices cause I am not sure what they are worth.
But I will....if you want to make me offer please do so....
I do have a steering cable.....
Trim handle....$75
Control cables....$20 each
Steering Cable....$20
Seats....for the whole set. $200
Trailer...with or without boat....$1000. It is great shape, but needs a new winch.
Boat Hull alone...$200
Jet pump freshly painted...with Jetovator....$500
Hot Foot $20
Gauges....as pictured above...$125
Fuel Tank $20
Please excuse any typos....I cut then end off of my finger yesterday....so it is a little difficult to type with this bandage on.
Thanks

[WriedtStuff]

Here are some pics of the trailer:
http://www.mindspring.com/~agood/MVC-524S.JPG
http://www.mindspring.com/~agood/MVC-523S.JPG
I also have this intake. I can cut it from the boat if no one wants the boat...otherwise it will go with the boat:
http://www.mindspring.com/~agood/MVC-525S.JPG
Jet Pump...Ready to install:
http://www.mindspring.com/~agood/MVC-522S.JPG
Fuel Tank...has sender in it:
http://www.mindspring.com/~agood/MVC-526S.JPG

[WriedtStuff]

BTW, You can email me at agood2@mindspring.com if you want to discus any of this in private...

[WriedtStuff]

OK, Did I scare eveyone off with the prices? I guess Ebay is next....

[bighead]

???? $100.00 complete gauge set up ??????

[MRS FLYIN VEE]

nice;)

[WriedtStuff]

$125 for the gauges...and I will cover the shipping.....I just paid $200 for them a month or so ago.

[WriedtStuff]

OK, Maybe you guys have somethings I need and we can work a trade...
I need a complete ignition system....for a 460 ford and a carburetor for the same.....anyone want to trade?

[mickeyfinn]

I have an extra holley 750 here. It has vacuum secondaries instead of mechanical but ran good for me.

[WriedtStuff]

The trim handle is SOLD!
The rest of this stuff is going on Ebay....
Thanks,

[WriedtStuff]

Hey MickeyFinn,
I have replied to your emails but they get getting rejected by your ISP.
I went to pick up the seats and the guy was closed....I will get them next week and send you some pics....if your email starts working again.....