rearend

[skeepwerkzaz]

Anyone have any 3.08-3.73 posi rearends?
thanks,
Skeep

[superdave013]

The Gear Man should have what you need.
Call Bill Sylvia @ 714 537-9495
Tell him Dave Bottomley sent ya.

[Cheap Thrills]

I have a 3.27 from a 87 T/A .
PM me for more info .
C.T. :wink:

[396_Z]

What rear specifically? 10 or 12 bolt.... if 10 bolt ring gear diameter, 7.5/7.625 or 8.5"?
Oh, and 3.27 is a 9 bolt aussie made rear, pretty application specific there. The only GM cars I'm aware of having those is the f-body's from 86 up to around 92.

[Cheap Thrills]

Originally posted by 396_Z
What rear specifically? 10 or 12 bolt.... if 10 bolt ring gear diameter, 7.5/7.625 or 8.5"?
Oh, and 3.27 is a 9 bolt aussie made rear, pretty application specific there. The only GM cars I'm aware of having those is the f-body's from 86 up to around 92.
correctamundo . he didn't specify exactly what his needs were so I tossed it out there .
I removed it from a low mile T/A
during a subframe job with a narrowed 9" disk brake FOMOCO unit in place of it . :p
C.T. :wink:

[BrendellaJet]

Ive got one for an A body I might let go for the right price.

[skeepwerkzaz]

I should have been more specific.
I am looking for a diff for a '67 chevy camaro, but am not pickey.
I would entertain any of the following:
1. A direct bolt in 10 or 12 bolt posi. (f-body,nova etc...)
2. A modifiable rearend, i.e. 9 inch, dana 44
, 5 lug dana 60, 3rd gen f-body with disks.
I have a fabricator that can cut the housing, and a machine shop that can cut and re-spline the axels, so that is not a big deal. However, I don't want a six/eight lug rear, so that won't do. If it comes down too it though, I will run a different bolt pattern rear wheel, as I am going to have either 18's or 19's on the back and 17's or 18's on the front. Meaning they won't be interchangeable anyhow.
Thanks for the hastey replies though and keep 'em coming!
Skeep

[Sleek-Jet]

I know a guy that has a 12 bolt posi for an A-body if your interested, but of coarse you'd have modify it for the F-body.
It's down here in Tucson.

[superdave013]

did you call Bill? He will have what you are looking for for sure.

[Craig]

Originally posted by BrendellaJet
Ive got one for an A body I might let go for the right price.
A Body, as in 70 Chevelle, GS, 442, GTO? What gears and what price?
Craig

[BrendellaJet]

Originally posted by Craig
A Body, as in 70 Chevelle, GS, 442, GTO? What gears and what price?
Craig
Yep, it came out of a 68 Chevelle to the best of my knowledge. I had plans for it, but my El Camino project is on hold until my boat is finished, and its taking up space. I beleive the gears are 3:73 with an eaton posi. All original 12 bolt. Haven't given much thought to the price, but Ill consider all offers.