Parts Swapmeet?

[cyclone]

can we get another one going? I need a few parts and have a few to sell/trade.
oil pan is sold!
polished Weiand blower manifold for BBC
TCI Rattler balancer ran one season on my 502 Chevy
I'm looking for a 10-12 Quart oil pan that'll fit a Merlin III block (gen 4)
thanks!
-mike

[MudPumper]

Hey Mike, you gonna make it to BR for the 4th?????

[cyclone]

No on the 4th. Might be in Havasu that weekend.

[HotHallet]

chrome plated header braces for a 460 Ford for Long Collector Bassett straights
chrome was just done on them and I turned my long collectors into shorties-can't use them
$75.00 for the pair-you pay shipping

[victorfb]

mike, ill trade ya a used holley black fuel pump with mallory regulater and duel feed line for a holley for that TCI balancer. :p

[cyclone]

that figures. trading away parts you got for free to the guy you got them from. :D

[WriedtStuff]

I need a Holley 750 DP mechanical....that is in good shape and ready to run. I also need an MSD 6AL.

[396_WAYS_TO_SPIT]

I have a 429 bbf,oilpan,timing cover,flywheel,harmonic balancer,crank,rods,oem pistons-$300 takes it.
mallory dual point dist. Sbc/bbc $25
BBF header braces $45
um,um,um, I have more parts I just need to go through my stuff!
396

[Cs19]

Harwood Dragster scoop. Brand new, ready for paint.
http://www.***boat.com/image_center/data/520/409DCP00862-med.JPG

[TIMINATOR]

Wriedtstuff: I've got numerous double pumper Holleys (several 750s), and 1 new and 1 used MSD6AL boxes, also a BBChevy o-port Performer RPM (NOT AN AIRGAP),Weiand Stealth for BBC, a new Victor for a 460 Ford, droops, replaceable insert choke nozzles,a complete Dominator Pump, the complete changeover setup to go to a BBChevy, including: 3 point mount setup, logs,flywheel, starter, alt., etc. Also intake piece,grates,used impellers (Aluminum only left), drive couplings and adaptors a set of BBC Bassets w/injector lines (if the guy that has dibbs on them doesn't take them). A single axle jetboat trailer, annnndddd a 360 AMC complete changeover setup too. And more other stuff than you can possibly imagine. I'm in the Phoenix,AZ. area. Don't PM, I don't get on here much, call me at 623-877-8553 ask for the TIMINATOR!:) :) P.S. still got the 21 Kachina LAZER too!

[Jake W]

Timinator do you have a true Berkeley droop one that says berkeley on the side and is double drilled?If so how much ?
Jake:D

[TIMINATOR]

Sorry its gone.... but I forgot to mention that I have a few split bowls and a CRAPLOAD of nitrous bottles, plates and misc. stuff too if that helps anyone.:cool: TIMINATOR

[djdtpr]

I need a dooley or bassett scoop for duals the tall one if anyone has one.Oh and i need it 8 3/4 center to center.

[victorfb]

i have a dooley polished scoop for duals. 10 1/4 centers. new, just been sittin around for years.

[FOURQ]

cs19 how much you want for the scoop?

[Cs19]

Well they are $190 plus tax from harwood, and the plug for the opening is $20. I'll take $125 for it all plus shipping.
I've got about 2.5 hours of prep time into it, it's ready for paint.When they come from the factory they are no where near ready for paint.
Let me know if you're into it, or you can call me 949-294-1394. Thanks

[disco_charger]

Originally posted by TIMINATOR
Wriedtstuff: I've got numerous double pumper Holleys (several 750s), and 1 new and 1 used MSD6AL boxes, also a BBChevy o-port Performer RPM (NOT AN AIRGAP),Weiand Stealth for BBC, a new Victor for a 460 Ford, droops, replaceable insert choke nozzles,a complete Dominator Pump, the complete changeover setup to go to a BBChevy, including: 3 point mount setup, logs,flywheel, starter, alt., etc. Also intake piece,grates,used impellers (Aluminum only left), drive couplings and adaptors a set of BBC Bassets w/injector lines (if the guy that has dibbs on them doesn't take them). A single axle jetboat trailer, annnndddd a 360 AMC complete changeover setup too. And more other stuff than you can possibly imagine. I'm in the Phoenix,AZ. area. Don't PM, I don't get on here much, call me at 623-877-8553 ask for the TIMINATOR!:) :) P.S. still got the 21 Kachina LAZER too!
Tim, what kind of grates? Thanks.

[Heatseeker]

I've got a MSD Pro-Billet distributor and a set of sheetmetal valve covers for a BBC. These parts were for planned future upgrades. But I need to raise some ducats to finish this dang boat before summer passes me by.
The distributor is like new. It was a vacuum advance(a model #8361), but was converted using MSD's lock out to mechanical only. It has a new steel gear, new cap and rotor. It needs the plug replaced, but it's included. $175 including shipping.
http://www.hotboatpics.com/pics/data/500/36631-med.jpg
The valve covers are brand new. Only one of them has been unwrapped since I bought them. The bolt tubes
are welded both top and bottom. They shouldn't leak like some of the others I've seen.I paid $210. $180 including shipping.
http://www.hotboatpics.com/pics/data/500/3663Dscf0005-med.jpg

[FOURQ]

Originally posted by cs19
Well they are $190 plus tax from harwood, and the plug for the opening is $20. I'll take $125 for it all plus shipping.
I've got about 2.5 hours of prep time into it, it's ready for paint.When they come from the factory they are no where near ready for paint.
Let me know if you're into it, or you can call me 949-294-1394. Thanks
i will get with ya this weekend and let you know ..
4Q

[WriedtStuff]

Originally posted by TIMINATOR
[B]Wriedtstuff: I've got numerous double pumper Holleys (several 750s), and 1 new and 1 used MSD6AL boxes, ]
How much?
Thanks!

[WriedtStuff]

I still have these for sale....$125 plus shipping. They are all brand new.
http://www.***boat.com/image_center/data/521/174690_1_b.jpg

[OMEGA_BUBBLE_JET]

Holley 650dp mechanical secondaries, rebuilt spring '03. choke has been removed other than that unmolested. clear sight plugs on the bowls. includes chrome dual feed line with 15lb gauge. carb performs flawlessly and was removed from my boat running 3 weekends ago. $150 you pay shipping
http://www.***boat.com/image_center/data/500/523holley_650dp1-med.jpg
http://www.***boat.com/image_center/data/500/523holley_650dp2-med.jpg
billet aluminum/red anodized fuel filters. these fit the inlet to holley carbs and have a -06 fitting on the other end. they are brand new and have never had fuel run thru them. I paid $30 each from Jegs. $40 takes them both. you pay shipping.
http://www.***boat.com/image_center/data/520/523fuel_inlet1-med.jpg
http://www.***boat.com/image_center/data/520/523fuel_inlet2-med.jpg
http://www.***boat.com/image_center/data/520/523fuel_inlet3-med.jpg
Omega

[Blown 472]

Kuhls carb adaptor puts them inline, for standard holleys, 75.00 you pay for shipping.

[dekmaster]

Will this carb work on a 455 olds?

[OMEGA_BUBBLE_JET]

Originally posted by dekmaster
Will this carb work on a 455 olds?
yep. It came off a slightly modified 460 ford. as long as you don't plan on spinning 6,000+ rpm you should be fine. PM me for more
details
Omega

[Jetdriver]

Wanted: Droop, long!

[Jet Hydro]

Olds...Make offer + shipping
http://www.hotboatpics.com/pics/data/500/4213P1020394.JPG
http://www.hotboatpics.com/pics/data/500/4213P1020395.JPG

[Greaser]

I have a set of 460 logs and risers for sell, make me an offer.
And I am looking for a dooley or bassett style scoop for a single holley.
Also looking for a droop for a berkely jb

[LakesOnly]

SOLD--THANK YOU)
LO

[565edge]

Originally posted by cs19
Well they are $190 plus tax from harwood, and the plug for the opening is $20. I'll take $125 for it all plus shipping.
I've got about 2.5 hours of prep time into it, it's ready for paint.When they come from the factory they are no where near ready for paint.
Let me know if you're into it, or you can call me 949-294-1394. Thanks
Ill take it.

[Greaser]

Originally posted by Greaser
I have a set of 460 logs and risers for sell, make me an offer.
And I am looking for a dooley or bassett style scoop for a single holley.
Also looking for a droop for a berkely jb
I am also looking for a ski tow for a 460

[WriedtStuff]

I haave a set of Rewarder Headers for a BBC. In good condition. They have the water lines in them.....I also have a set of mufflers for rewarder headers......$400 for the headers....$75 for the mufflers.....

[sanger rat]

Looking for a Snoot for a Berkeley JG. Droop or Straight. Email me at Toynova@aol.com

[Cs19]

Allen, I got your mesage, we can make arrangements over the weekend. Ill be at the river, but I will call you on my way out. Let me know through a PM if your gonna be in OC over the weekend, I will make arrangements for someone to get it to you if your gonna be here.Later.

[AmericanThunder1]

I also have a set of 460 logs with risers. I would trade for an 850 mechanical secondary carb or I also need the wiend stealth intake for a 460. Pm me I am on almost every night.

[shaun]

I'm looking for the following stuff!
10/14 Quart jet boat pan for 454 mark IV
MSD 6AL
Rail Kit for 454 Mark IV/Jetboat
990 or 188 Heads for 454 Mark IV

[slotracer]

wriedtstuff check your p.m.'s i will take the mufflers
pat(slotracer):D

[WriedtStuff]

Hey Slot I replied to your PM....Let me know what you want to do...

[Heatseeker]

Valve covers are sold! Thanks Justin!
Originally posted by Heatseeker
I've got a MSD Pro-Billet distributor and a set of sheetmetal valve covers for a BBC. These parts were for planned future upgrades. But I need to raise some ducats to finish this dang boat before summer passes me by.
The distributor is like new. It was a vacuum advance(a model #8361), but was converted using MSD's lock out to mechanical only. It has a new steel gear, new cap and rotor. It needs the plug replaced, but it's included. $175 including shipping.
http://www.hotboatpics.com/pics/data/500/36631-med.jpg
The valve covers are brand new. Only one of them has been unwrapped since I bought them. The bolt tubes
are welded both top and bottom. They shouldn't leak like some of the others I've seen.I paid $210. $180 including shipping.
http://www.hotboatpics.com/pics/data/500/3663Dscf0005-med.jpg

[Hustler]

I'm looking for a RPM Performer manifold for a oval port application. any one have one laying around?

[Jrocket]

Originally posted by Hustler
I'm looking for a RPM Performer manifold for a oval port application. any one have one laying around?
909! :D

[Squeezing Spectra]

I have just added some more parts that need a new home cause im tired of them taking up space in my garage e-mail me for more info or pictures or call me at 714-209-0390. Thanks Bruce
454 cast crank std/std need turning. $75
Aeromotive electric fuel pump like new. $125
Keith Eickert remote oil filter head mount. $100
Dooley BBC 10 quart 4.250 stroker pan jet gen 4 $175
One BBC 049 head good core complete $50
BBC holley pro dominator tunnel ram for std 4150 carbs fully ported and flowed powder coated black with billet regulator and all bradid steel fuel lines very nice over $1000 invested $375
Msd 7-ml box like new with msd coil $275
One BBC gen 5&6 088 square port head fully ported and flowed with stainless valves also will include bad head that droped a valve may be repairable $200
Isky solid roller springs $100 set
isky BBC 730 solid roller cams $150 each
Isky BBC 1.75 roller rockers $200 set
BBC pro double bar stud girdle with nuts $100
Holley matched pair 850cfm double pumpers bolt them on and go for blower, turbo or tunnel ram $500 pair
BBC Bds tall deck square port pro blower intake manifold like new for 8-71-14-71 $400
BBC 454=496 stroker pistons 2 sets flat top and domed like new JE and Wisco $300 a set
BBC set of 6 6.535 400 long carrillo rods like new $400
BBC Merlin Jenkins oval port heads ported with new jesel rocker stands and titanium valves needs a couple valves replaced, titanium retainers and roller springs $1000
Agressor polished droop snoot long new $250
BBC Velasco 4.250 stroker crank like new std/std fresh from machine shop $850
Polished dooley scoop with cover and spark arrestors for dual carbs $250
BBC Dart tall deck intake manifold $200
Polished Berkeley non split bown $200
BBC billett 4 bolt main caps set of 4 $200
Superchiller core for ror roots8-71-14-71 style chiller like new kept for spare $400
Misc double pumper carbs
And a ton more stuff that i can think of if you dont see what you need feel free to ask i have alot more stuff than listed.
Thanks Bruce

[Jetdriver]

Bruce check your pm's

[1 fast okie]

brand new preloader/inducer 300.00 plus shipping. and one 3inch and one 3 1/16 inch nozzle inserts for a place diverter 35.00 each plus shipping

[HBjet]

Originally posted by djdplacecraft
I need a dooley or bassett scoop for duals the tall one if anyone has one.Oh and i need it 8 3/4 center to center.
Mine will be for sale real soon. I believe its the 8-3/4 center too. I will check today. Got a new scoop, just waiting to finish up my tray for it. PM me.
I also have a BBC Forged GM crank NEW (std/std) (4" stroke) ready to go, never used. I paid $450 for it last year... make offer.
HBjet

[TIMINATOR]

I've got the O-port BBC manafolds, 750 Holley(and others DPs), and the grates. USE THE PHONE! 623-877-8553 TIMINATOR

[BigBoyToys]

Complete 12JG Split Bowl Pump. $1000.00 obo or trade for ?? See pics and more info Here http://www.***boat.com/forums/showthread.php?s=&threadid=50952
Also, 476 ci BBC Motor, complete from Pan to Tunnel Ram. $3500.00 obo or trade for ?? See more info and pics here http://www.***boat.com/forums/showthread.php?s=&threadid=50951
Also, nice Tow Vehicle, 1983 Chevy Suburban 4X4, Very Custom! $4500.00 obo or trade. See more info and pics here http://www.***boat.com/forums/showthread.php?s=&threadid=50950 with complete pics available here http://www.pritek.net/suburban/

[BigBoyToys]

Moroso BBC Tall Sheet Metal Valve covers with Tall Breathers. Very Nice!! $200.00 + Shipping
http://www.pritek.net/forsale/vc1.jpg
http://www.pritek.net/forsale/vc.jpg

[Big Proppa]

a full set of 8:1 TRW blower pistons connected to rods. They came out of my blower motor before the re-build - great shape.
Standard height blower manifold for a 671
Nice looking set of HTM Valve covers. and a whole bunch of misc. v-drive parts.
PM me or Call (909) 712-3290

[TIMINATOR]

I'll sell my spare Big Block Chevy pan, its a Milodon 10 quart jetboat pan w/ a built in windage tray and crank scraper, also has the pickup too! Like new! Someone here was asking for one.... TIMINATOR 623-877-8553

[BigBoyToys]

2 BBC Motors for sale. 1 is a HP 476 ci with lotsa HP parts and the other a stock 454. $3500.00 for the complete minus carbs 476 and $800.00 for the complete 454. Will consider all offers and would be willing to sell the 476 as complete, Long Block, or short block. EMail me at JimP@pritek.net if interested.

[Cole]

1 pair of BBC basset headers (shorties) $250.00
PM me or call me at 949-375-3747 Cole

[TRG]

kill the bitch bob!

[Cs19]

I still got the scoop if anyone wants it. those who pmed me and are still into it, pm me again, I forget who was interested and I deleted my pms.
http://www.***boat.com/image_center/data/520/409DCP00862-med.JPG

[HBjet]

I have a Dooley Scoop for dual carbs (4150's) with a 9 1/2" center to center. Scoop also has a cover for the front.
http://www.***boat.com/image_center/data/500/20cheap.jpg
(old motor in that pic)
HBjet

[Cs19]

Nice pic man, that new scoops gonna look trick on there.

[GM Killer]

CHEBY parts for sale:
1. set of Crane gold rockers for BBC $150
2. BBC steel crank for 396/427. std/std. $200
3. 990 heads. unported. manley valves. 1 bent valve. with chrome moroso valve covers. dual springs. $250
4. A yard sale this weekend at the home
2269 Valley View Norco

[hack job]

i have a clay smith cam c-310-8-b for a 460 bbf it has less than ten hours on it and i have the matching lifters .100 for both
i also have some ford motor sports valve covers in decent shape( need to be cleaned up) both with push in style breathers 75 takes them they are for a bbf
i also have ford to chevy exhaust pattern changers ( from lighting headers ) they come with the copper gaskets for a ford . these will allow you to bolt 454 exhaust to your bbf. 125 takes them( half what they are new)
for more info on any thing pm me;)

[shaun]

Water injection lines for Basset headers - $50
http://www.reitanfamily.com/albums/SwapMeatParts/IM001215.sized.jpg
Mallory Distributor for BBC - Part no. 2548201 - make offer
http://www.reitanfamily.com/albums/SwapMeatParts/IM001216.sized.jpg
Stock 454 flexplate - ehh, make me a offer
http://www.reitanfamily.com/albums/SwapMeatParts/IM001218.sized.jpg
Dooley 10qt Stroker Pan, I was told this would fit a jetboat and well it doesnt look like it will fit mine. Comes with a oil pump that is supposivly blueprinted. Also comes with the windage tray and pickup you see in the pic. I'm selling it for what i got it for $180
http://www.reitanfamily.com/albums/SwapMeatParts/IM001220.sized.jpg
http://www.reitanfamily.com/albums/SwapMeatParts/IM001222.sized.jpg

[shaun]

Stock BBC 454 oil pump, has less than 5 hours on it. - make me a offer
http://www.reitanfamily.com/albums/SwapMeatParts/IM001223.sized.jpg
.040 over pistons for BBC, i think they are TRW, i cant say for sure, comes with pins, less than 5 hours on them - make me a offer
http://www.reitanfamily.com/albums/SwapMeatParts/IM001225.sized.jpg
http://www.reitanfamily.com/albums/SwapMeatParts/IM001226.sized.jpg
http://www.reitanfamily.com/albums/SwapMeatParts/IM001227.sized.jpg
http://www.reitanfamily.com/albums/SwapMeatParts/IM001228.sized.jpg
454 BBC External Hermonic Balancer - make me a offer
http://www.reitanfamily.com/albums/SwapMeatParts/IM001229.sized.jpg
http://www.reitanfamily.com/albums/SwapMeatParts/IM001230.sized.jpg

[shaun]

454 Oil pan from a dooley truck - make me a offer
http://www.reitanfamily.com/albums/SwapMeatParts/IM001231.sized.jpg
http://www.reitanfamily.com/albums/SwapMeatParts/IM001232.sized.jpg
BBC Bassett jetboat headers, comes with injection lines - make me a offer
http://www.reitanfamily.com/albums/SwapMeatParts/IM001209.sized.jpg
http://www.reitanfamily.com/albums/SwapMeatParts/IM001210.sized.jpg
http://www.reitanfamily.com/albums/SwapMeatParts/IM001211.sized.jpg
http://www.reitanfamily.com/albums/SwapMeatParts/IM001212.sized.jpg

[hack job]

update the cam specs are 645 lift and advertised duration is 310 and duration at .050 is 270 hope this helps;)

[riverbound]

I have a cast iron cobra jet manifold for 429/460
Stock oil pan also for 460
Melling high volume oil pump for 460 (less than 10 hrs)

[Cs19]

BBC tall deck manifold spacers, rectangle port.

[Jeff Fry]

Im looking for a steering tube, complete with fittings and grommet! Anyone got one?

[Hustler]

Originally posted by Jeff Fry
Im looking for a steering tube, complete with fittings and grommet! Anyone got one?
Contact Jim Brock @ Cyclone Marine, he's a good source for parts like that. 818-890-1867

[throwerb]

Set of bbc oval port heads with about 5 hours since rebuild. CHEAP!:D

[slotracer]

what kind of oval heads are they 049?
pat(slotracer):D

[Jet Hydro]

BBC Intake, dominator carb flange....
I still have the Olds Valve Covers and intake ???????
http://www.***boat.com/image_center/data/520/208P1010883-med.JPG
http://www.***boat.com/image_center/data/520/208P1010885-med.JPG

[throwerb]

# on heads says "TRUCK" 343771.

[78Southwind]

Make an Offer
http://www.***boat.com/image_center/data/520/1676Nozzle_Rudder-med.JPG

[bonesfab]

i have a bbc jet conversion. hardin marine wet manifolds front and rear motor mounts and jet drive adapter. 300.00

[djdtpr]

Anyone have a bbc block in good condition laying around 0.30 over or less!

[BigBoyToys]

Originally posted by djdplacecraft
Anyone have a bbc block in good condition laying around 0.30 over or less!
I have a complete motor that I believe is std. bore. But I'm in NorCal. Make me an offer and if agreed on, come up and get it:cool:

[dave186]

hey guys, ive been lurking on here for a while, havent introduced myself yet but im in need of a set of log manifolds for a BBF, are any still left?

[BigBoyToys]

I have a set of used Merlin 345cc BBC steel Heads for sale, with valves and springs. Mild porting done. Asking $1200.00 + Shipping for the pair. Email me at JimP@pritek.net if interested.
Also have a Weiand Tunnel Ram for a Rectangular Port, BBC FOr sale. I believe the PN is 1985. For 2-4150 Carbs. $150.00

[BigBoyToys]

Complete Berkeley 12JG Split Bowl Pump with "A" impeller. Does not include Intake or rudder, otherwise it's complete. Looks to be in pretty good shape and shaft turns like it shoul. I purchased this a few months ago to do a complete pump swap, but have since purchased individual parts for the changeover and no longer need this pump. A steal at SOLD

[BigBoyToys]

;) :D :D

[Shark In The Pond]

Listing for a freind ,he has a complete Gale Banks turbo system for sale with 8- 10 hrs on them . 3000.00

[HBjet]

Originally posted by HBjet
I have a Dooley Scoop for dual carbs (4150's) with a 9 1/2" center to center. Scoop also has a cover for the front.
http://www.***boat.com/image_center/data/500/20cheap.jpg
(old motor in that pic)
HBjet

[wideopen545]

have a set of steel upsweep headers with flappers for sale 300.00 nice and their are coated tim 540.871.4833
http://www.***boat.com/image_center/data/504/317DSC01040-med.JPG

[wideopen545]

i have a khul blower top for two dominators inline or sideways good shape 100.00 tim 540.871.4833
http://www.***boat.com/image_center/data/504/317DSC01055-med.JPG
also a set of flame arresters for 5 1/4 neck carbs or 4150s
50.00 tim 540.871.4833
http://www.***boat.com/image_center/data/504/317DSC00988-med.JPG
and a set of new k&n stacks and filters for 4150s 100.00 tim 540.871.4833
http://www.***boat.com/image_center/data/504/317DSC00899-med.JPG

[sam1]

I'm looking for a set of bbf logs . Is their any left?

[h2ojet001]

Keith jackson idler gear assembly for sale. Also have some gm dome pistons for 454 standard bore engine .
Barry

[BigBoyToys]

I also have a complete full roller 468 BBC, complete from Dooley pan to Weiand Tunnel Ram. 468, 4 Bolt Mains, 12.5:1 CR, ATI Harmonic Balancer, Steel Crank, Slid Roller Cam, Competition Cams ValveTrain(Solid Roller Cam, SOlid Lifters, roller rocker arms, pushrods, etc), Rocker Stud Girdle, Merlin 345cc Steel 119cc Open Chamber Heads with 2.30/1,88 SS Valves, (Minor porting done), MSD Ignition, Bassett Headers, and lots more. only about 5 hours run time on this motor. Asking $4k for this motor. All it needs is 2 carbs, of at least 1500cfm Total (Or more carburetion) I am pulling the motor out of the boat today, and will be taking offers through tomorrow, after which I will be tearing it down and parting it out. This motor has gotta sell, Asking $4k or MAKE OFFER. Need the $$ quick. You can't even build this motor for twice the cost of what I'm asking for it. If anyone needs any of the parts listed, keep an eye out on EBay because as the motor starts to get torn down on Tuesday, the parts will be going up on Ebay

[berk]

pair of billet vent/ speaker cover thingys, polished and nice, few minor scratches, + bonus hose flange and ss bolts. 45$ delivered usa,
OR trade for reverse bucket, prefer newer AT style?

[berk]

14"x3" xstream K&N air cleaner, fits single 4 barrel used maybe 2 hrs, like new, 80$ delivered usa.
OR trade for reverse bucket, prefer newer AT style?

[pleasantcat]

if you jet guys need some old logg manifolds i've got a set sitting in my garage as well as a bell housing and front plate for a bbc in a jetboat. best offer and i'll send em' off to ya.