Fiat48

[Squirtin Thunder]

Fiat48,
What do you think of the Dynaflow stuff, rotating assemblies? They have some real good pricing. $1400 for the 557ci rotating and all the way down to the 514. The 460 stuff is even cheeper.
Thanks
Jim

[Fiat48]

I don;t know anything about them but seemed there was a problem somebody had up here...with service I think...Maybe K flat?

[INEEDAV]

Link to Problem Thread (http://www.***boat.com/forums/showthread.php?s=&threadid=41876&highlight=kflat+problems)
Here is the thread Fiat mentioned.

[LakesOnly]

Dynoflow seems to be a reseller in the parts market.
If you want a BBF rotating assembly, I recommend Brian Adams at AD Performance. He deals directly with SCAT and can get you some great deals.
www.ADperformance.com
Brians email: ScatStroker@hotmail.com
Brian: 425-941-2267
LO

[Blown 472]

Originally posted by LakesOnly
Dynoflow seems to be a reseller in the parts market.
If you want a BBF rotating assembly, I recommend Brian Adams at AD Performance. He deals directly with SCAT and can get you some great deals.
www.ADperformance.com
Brians email: ScatStroker@hotmail.com
Brian: 425-941-2267
LO
Scat is out of LA, right? I was reading a hot rod mag from the early 70's and they had an add in there for vw parts.

[LakesOnly]

Originally posted by Blown 472
Scat is out of LA, right? I was reading a hot rod mag from the early 70's and they had an add in there for vw parts.
Like Eagle, SCAT's stroker stuff originates in China, but SCAT puts the final machining touches on their cranks here in their Long Beach facility. Better-kept machinery, better QA, facility is right here, man.
LO

[78Eliminator]

Originally posted by Blown 472
Scat is out of LA, right? I was reading a hot rod mag from the early 70's and they had an add in there for vw parts.
You into Scat? ;)

[LakesOnly]

Originally posted by 78Eliminator
You into Scat? ;)
Lot's of SCAT in LA! :D
LO

[Squirtin Thunder]

Thanks Guys !!!

[GofastRacer]

Originally posted by Blown 472
Scat is out of LA, right? I was reading a hot rod mag from the early 70's and they had an add in there for vw parts.
They are in Redondo Beach on Kingsdale Ave, I used to live right down the street from them!..
Scat!. (http://www.scatvw.com/vwad_0mile.html)

[GofastRacer]

I just did a 468 long rod deal from them and they're machining was tits all clearances was right on. The only thing I had to do was pin fit the rods and pistons!...Now this is for a run of the mill type motor, depending on the application naturally you would have to do the corrections!....Personally, for the price you can't beat it!.. Don't know about customer service though, didn't have to deal with that!..