PDA

View Full Version : Work done by riverbound



teeitup
07-13-2004, 03:02 PM
Took my new 28 Daytona to riverbound's shop last week. Bill was the absolute best guy ever to deal with. I told him I had 2 problems; a budget of around $4000.00 and I needed the boat by Thursday to go to the river. He came through on both counts.
I have never heard a stereo for under $10,000 that sounds as good as what he did. The work was clean, he gave everything his personal attention and was a pleasure to deal with.
I am recommending him to anyone and everyone, especially my buddies who were in the same cove at Mohave, jealous that they spent more than twice as much and my new system blew theirs away.
THANKS Bill !!

SHAKE-YO-AZZ
07-13-2004, 03:49 PM
Sounds good

riverbound
07-13-2004, 05:14 PM
Thanks for the compliments. I'm glad you are happy with it. I saw your boat today when I was at Eliminator and as soon as they are done I will pick it up from them. Also call me regarding your grills I talked to Ron today and he said it is no problem to change them to red.

Evo22
07-13-2004, 06:13 PM
thats great too hear

little rowe boat
07-14-2004, 09:03 AM
Bill and his guys have done a little work on my boat,they know there stuff and are a class act.
Al & Eds Ontario Mills.

lucky
07-14-2004, 09:07 AM
you guys don't go to wally world ??? lmao - 4000 on a stero - whew - cheap :eek: :D i guess i better update my portable ?

intense
07-14-2004, 09:31 AM
Lets see some pics!

riverbound
07-14-2004, 10:02 AM
Here are some pics and details
Head unit=MB Quart marine
Speakers=MB Quart 6x9 Seperates
Amps=Rockford Fosgate, P8004 & P6001bd
Woofers=JL 12W0
XM radio through aux. input
Rockford wired marine remotes x2
Batts= Optima blue top deep cycle w/billet batt mounts.
wiring=monster
Front pass. side speaker
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_005-med.jpg
Front driver side speaker w/ wired controller on driver side
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_015-med.jpg
Radio cover
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_011-med.jpg
Batteries
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_018-med.jpg
One of the amps (the other is on the drivers side)
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_023-med.jpg
Drivers side (note tweeters mounted in middle of grill)
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_026-med.jpg
XM ran through aux. input on radio
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_028-med.jpg
Transom mounted controller
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_030-med.jpg
hopefully thats enough pics for you:)

intense
07-14-2004, 01:54 PM
You left out the subs:D :D

100mbs
07-14-2004, 02:08 PM
Really Nice System!!!!!

riverbound
07-14-2004, 02:25 PM
Originally posted by intense
You left out the subs:D :D
Ooops,here you go. not my choice of grills but, they are the strongest ones we sell. the other one is on the other side in the same spot.
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_021-med.jpg

bear down
07-14-2004, 02:44 PM
Very Clean work...Congrats on the new system...

ROZ
07-14-2004, 03:02 PM
Originally posted by riverbound
Ooops,here you go. not my choice of grills but, they are the strongest ones we sell. the other one is on the other side in the same spot.
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_021-med.jpg What carpet did you use? The seam didn't look very cooperative... Maybe it's the picture flash?

riverbound
07-14-2004, 03:33 PM
Originally posted by ROZ
What carpet did you use? The seam didn't look very cooperative... Maybe it's the picture flash?
The seam is only visible in the picture because of the flash. We used the factory carpet, which is a pain to work with (rubber backed)

Reaper1
07-15-2004, 06:43 AM
Riverbound - Did you install the new batteries for the customer? Did he supply the battery boxes or did you take care of all of that stuff?
Reaper

riverbound
07-15-2004, 08:04 AM
Originally posted by Reaper1
Riverbound - Did you install the new batteries for the customer? Did he supply the battery boxes or did you take care of all of that stuff?
Reaper
We did it all, if you look really close at the battery boxes you can see our logo laser etched on them.:)
http://www.***boat.com/image_center/data/520/681MIKE_NORMAN_012-med.jpg

Reaper1
07-15-2004, 08:07 AM
Sweet! I'm planning on doing some rennovations to my current system during the winter months. I'll give you a call.:cool:

riverbound
07-15-2004, 11:38 AM
Originally posted by Reaper1
Sweet! I'm planning on doing some rennovations to my current system during the winter months. I'll give you a call.:cool:
Let me know when you are ready and I wil get you set up