Originally posted by Havasu Hangin'
I wouldn't split them up...why build 2 boxes when 1 will do? Good point!!
Printable View
Originally posted by Havasu Hangin'
I wouldn't split them up...why build 2 boxes when 1 will do? Good point!!
Yup. I splashed HH's design! Sorry I forgot to send the consulting/trademark infringement bill.
The only thing thats different in mine is the size of the box. I went with .65 cubic feet per sub. As a result, HH's is probably a little louder. But the 1200.1 amp doesnt have any problem pushing the four 10's to the limit. And its too loud for me. Headroom is a good thing.....
by the looks of that hull you have to have a bench seat in the back right? If thats the case I would use the seat base for your subs, I have two jump seats in the back of my boat so the only other option I had was to put them in the bow, I have 2 Jl audio 12's under there and I love the way they sound.
It is settled. I am going with the seat option.
Thanks guys for the help.
We had our subs (10w7's) built in seperate boxes under the rear bench. The original owner had 6x9's there. I kept the 6x9 holes for the sound to pass thru which in turn protected the subs from one of my jackass friends putting their foot thru, and for stealth (except everyone who reads these forums) :D
...and you think there's a 6x9 in there! :eek:
Thats a sweet setup TD. Stealthy and very clean. Wish I would have thought of that....
I was also worried about someone kicking my subs too.What I did was to have Shockwave built me my sub box out of 3/4 plywood. They cut the holes for the subs and then put another 3/4 plywood sheet over the subbox to fit around the outside of the subwoofers. Then I put some pretty rigid metal covers over the subs. It gave the subs more room for excursion and reduced the chances of some errant heels. Came out like this:
http://www.***boat.com/image_center/.../80Stereo6.jpg
http://www.***boat.com/image_center/...tereo4-med.jpg
So far no one has messed em up yet....
Originally posted by rivercrazy
...So far no one has messed em up yet.
Give me time...give me time...
Thanks RC. So are your woofers exposed to punctures the way it's installed or is there a speaker cover over the cone that I just can't see in the picture? I think what you are showing is that the woofer is slightly recessed into the plywood and that is your protection, right?
Your set up isn't too shabby either RC (and HH too)!
:cool:
All of the subs have their own mesh metal woofer grill. I can't remember if the covers were on in that pic. But you can see the subs through the grill. They are pretty tough and it would take a pretty good impact to get to the sub.